All of lore.kernel.org
 help / color / mirror / Atom feed
From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct	ehci_hccr and ehci_hcor
Date: Thu, 21 Apr 2011 09:29:43 +0300	[thread overview]
Message-ID: <4DAFCED7.9010207@compulab.co.il> (raw)
In-Reply-To: <1303343572-19972-28-git-send-email-jkridner@beagleboard.org>

On 04/21/11 02:52, Jason Kridner wrote:

> Remove __attribute__ ((packed)) to prevent byte access to soc
> registers in some gcc versions.
>
> Having patches to enable ehci for the BeagleBoard lying around for
> several month, this one was the show-stopper.
>
> Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
> finding the problem.
>
> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
> Cc: Alexander Holler <holler@ahsoftware.de>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> ---
> Changes for v2:
> * Original and v2 were provided by Alexander Holler.
> * v1 was http://patchwork.ozlabs.org/patch/89358/
> * v2 was http://patchwork.ozlabs.org/patch/89362/
>
> Changes for v3:
> * Switched to align(4), rather than remove the attribute, per suggestion
>   from Alexander.

Also fixing the commit message would help
as the change log won't be available after the patch applied.

> ---
>  drivers/usb/host/ehci.h |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
> index 945ab64..3d0ad0c 100644
> --- a/drivers/usb/host/ehci.h
> +++ b/drivers/usb/host/ehci.h
> @@ -55,7 +55,7 @@ struct ehci_hccr {
>  #define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)
>  	uint32_t cr_hccparams;
>  	uint8_t cr_hcsp_portrt[8];
> -} __attribute__ ((packed));
> +} __attribute__ ((packed, aligned(4)));
>  
>  struct ehci_hcor {
>  	uint32_t or_usbcmd;
> @@ -85,7 +85,7 @@ struct ehci_hcor {
>  #define FLAG_CF		(1 << 0)	/* true:  we'll support "high speed" */
>  	uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
>  	uint32_t or_systune;
> -} __attribute__ ((packed));
> +} __attribute__ ((packed, aligned(4)));
>  
>  #define USBMODE		0x68		/* USB Device mode */
>  #define USBMODE_SDIS	(1 << 3)	/* Stream disable */

-- 
Regards,
Igor.

  parent reply	other threads:[~2011-04-21  6:29 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-20 23:52 [U-Boot] [PATCH] BeagleBoard updates rebased on u-boot-ti and debugged Jason Kridner
2011-04-20 23:52 ` [U-Boot] [PATCH] BeagleBoard: add xM rev C to ID table Jason Kridner
2011-04-20 23:52   ` [U-Boot] [PATCH] BeagleBoard: fixed typo in typecast Jason Kridner
2011-04-20 23:52     ` [U-Boot] [PATCH] Corrected LED name match finding Jason Kridner
2011-04-20 23:52       ` [U-Boot] [PATCH] BeagleBoard: fix LED 0/1 in driver Jason Kridner
2011-04-20 23:52         ` [U-Boot] [PATCH] led: added cmd_led to Makefile Jason Kridner
2011-04-20 23:52           ` [U-Boot] [PATCH] led: correct off/on locations in structure Jason Kridner
2011-04-20 23:52             ` [U-Boot] [PATCH] led: remove trailing whitespace Jason Kridner
2011-04-20 23:52               ` [U-Boot] [PATCH] led: loop through all leds Jason Kridner
2011-04-20 23:52                 ` [U-Boot] [PATCH] led: fixup help/usage Jason Kridner
2011-04-20 23:52                   ` [U-Boot] [PATCH] BeagleBoard: Pin mux initialization glitch fix Jason Kridner
2011-04-20 23:52                     ` [U-Boot] [PATCH] BeagleBoard: config: Switch default console from ttyS2 to ttyO2 Jason Kridner
2011-04-20 23:52                       ` [U-Boot] [PATCH] BeagleBoard: config: Remove omapfb.debug=y from Beagle and Overo env settings Jason Kridner
2011-04-20 23:52                         ` [U-Boot] [PATCH] BeagleBoard: config: reduce BOOTDELAY to 3 Jason Kridner
2011-04-20 23:52                           ` [U-Boot] [PATCH] BeagleBoard: config: change default resolution to VGA Jason Kridner
2011-04-20 23:52                             ` [U-Boot] [PATCH] BeagleBoard: config: don't suck in blank line Jason Kridner
2011-04-20 23:52                               ` [U-Boot] [PATCH] BeagleBoard: config: make mtest run Jason Kridner
2011-04-20 23:52                                 ` [U-Boot] [PATCH] BeagleBoard: config: increase command-line functionality Jason Kridner
2011-04-20 23:52                                   ` [U-Boot] [PATCH] BeagleBoard: config: load kernel via MMC ext2 Jason Kridner
2011-04-20 23:52                                     ` [U-Boot] [PATCH] BeagleBoard: config: add optargs/buddy/camera Jason Kridner
2011-04-20 23:52                                       ` [U-Boot] [PATCH] BeagleBoard: config: add ramboot Jason Kridner
2011-04-20 23:52                                         ` [U-Boot] [PATCH v2] BeagleBoard: Added userbutton command Jason Kridner
2011-04-20 23:52                                           ` [U-Boot] [PATCH] BeagleBoard: config: use the USERBUTTON command Jason Kridner
2011-04-20 23:52                                             ` [U-Boot] [PATCH] video: DSS makefile update Jason Kridner
2011-04-20 23:52                                               ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Jason Kridner
2011-04-20 23:52                                                 ` [U-Boot] [PATCH] BeagleBoard: config: enable DSS Jason Kridner
2011-04-20 23:52                                                   ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Jason Kridner
2011-04-20 23:52                                                     ` [U-Boot] [PATCH v3] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor Jason Kridner
2011-04-20 23:52                                                       ` [U-Boot] [PATCH] TWL4030/BeagleBoard: Added hub power enable Jason Kridner
2011-04-21  6:29                                                       ` Igor Grinberg [this message]
2011-04-21  6:26                                                     ` [U-Boot] [PATCH] BeagleBoard: Configure DVI/S-video Igor Grinberg
2011-07-04 21:58                                                 ` [U-Boot] [PATCH v3] OMAP3: Add DSS driver for OMAP3 Anatolij Gustschin
2011-08-04 20:54                                                 ` Wolfgang Denk
2011-08-04 21:14                                                   ` Jason Kridner
2011-08-04 21:02                                                 ` Wolfgang Denk
2011-07-04 21:51                                               ` [U-Boot] [PATCH] video: update Makefile to include OMAP3 DSS driver Anatolij Gustschin
2011-07-04 22:40                                                 ` Anatolij Gustschin
2011-04-21  5:58             ` [U-Boot] [PATCH] led: correct off/on locations in structure Igor Grinberg
2011-04-30  5:46     ` [U-Boot] [beagleboard] [PATCH] BeagleBoard: fixed typo in typecast Dirk Behme

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DAFCED7.9010207@compulab.co.il \
    --to=grinberg@compulab.co.il \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.