Re: [PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board

[Tony Lindgren <tony@atomide.com>]

* Jan Weitzel <j.weitzel@phytec.de> [110708 05:16]:
> This adds support for the Phytec OMAP4430 board called phyCORE-OMAP4 PCM049.

I've updated this for the TWL cleanup, that left out about 150 LOC.
Will apply to board-part-2 branch.

Jan, can you please check?

Regards,

Tony


From: Jan Weitzel <j.weitzel@phytec.de>
Date: Wed, 13 Jul 2011 00:58:26 -0700
Subject: [PATCH] ARM:OMAP4 add Phytec phyCORE-OMAP4 board

This adds support for the Phytec OMAP4430 board called phyCORE-OMAP4 PCM049.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
[tony@atomide.com: updated for timer and twl cleanup, and to select the board by default]
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 6b88799..d5e4b60 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -333,6 +333,12 @@ config MACH_OMAP4_PANDA
 	select OMAP_PACKAGE_CBS
 	select REGULATOR_FIXED_VOLTAGE
 
+config MACH_PCM049
+	bool "OMAP4 based phyCORE OMAP4"
+	depends on ARCH_OMAP4
+	default y
+	select OMAP_PACKAGE_CBS
+
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2d4d18e..7494b04 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -240,6 +240,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
 					   hsmmc.o \
 					   omap_phy_internal.o
 
+obj-$(CONFIG_MACH_PCM049)		+= board-omap4pcm049.o \
+					   hsmmc.o \
+					   omap_phy_internal.o
+
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
 					   omap_phy_internal.o \
 
diff --git a/arch/arm/mach-omap2/board-omap4pcm049.c b/arch/arm/mach-omap2/board-omap4pcm049.c
new file mode 100644
index 0000000..ad8cb46
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4pcm049.c
@@ -0,0 +1,602 @@
+/*
+ * Board support file for Phytec phyCORE-OMAP4 Board.
+ *
+ * Copyright (C) 2011 Phytec Messtechnik GmbH
+ *
+ * Author: Jan Weitzel <armlinux@phytec.de>
+ *
+ * Based on mach-omap2/board-omap4panda.c
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/i2c/at24.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/leds-pca9532.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/smsc911x.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <video/omapdss.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smsc911x.h>
+#include <plat/mmc.h>
+#include <video/omap-panel-generic-dpi.h>
+
+#include "hsmmc.h"
+#include "control.h"
+#include "mux.h"
+#include "common-board-devices.h"
+
+#define OMAP4_PCM049_ETH_GPIO_IRQ	121
+#define OMAP4_PCM049_ETH_CS		5
+#define OMAP4_PCM049_STMPE811_GPIO_IRQ	117
+#define OMAP4_PCM049_LCD_ENABLE		118
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "modul:red:status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 152,
+	},
+	{
+		.name			= "modul:green:status2",
+		.default_trigger	= "mmc0",
+		.gpio			= 153,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static void __init pcm049_init_early(void)
+{
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
+}
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.phy_reset  = false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap4_ehci_init(void)
+{
+	struct clk *phy_ref_clk;
+	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
+	if (IS_ERR(phy_ref_clk)) {
+		pr_err("Cannot request auxclk3\n");
+		return;
+	}
+	clk_set_rate(phy_ref_clk, 19200000);
+	clk_enable(phy_ref_clk);
+
+	usbhs_init(&usbhs_bdata);
+	return;
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+	}, {
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= 30,	/* wk30 */
+		.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34, /* 3V3 */
+	}, {}	/* Terminator */
+};
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
+	.cs             = OMAP4_PCM049_ETH_CS,
+	.gpio_irq       = OMAP4_PCM049_ETH_GPIO_IRQ,
+	.gpio_reset     = -EINVAL,
+	.flags          = SMSC911X_USE_16BIT,
+};
+
+static inline void __init pcm049_init_smsc911x(void)
+{
+	omap_mux_init_gpio(OMAP4_PCM049_ETH_GPIO_IRQ, OMAP_PIN_INPUT);
+	gpmc_smsc911x_init(&board_smsc911x_data);
+}
+#else
+static inline void __init pcm049_init_smsc911x(void) { return; }
+#endif
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		ret = twl6030_mmc_card_detect_config();
+		if (ret)
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, ret);
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+		return;
+	}
+	pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+/* Fixed regulator for max1027 */
+static struct regulator_consumer_supply pcm049_vcc_3v3_consumer_supply[] = {
+	REGULATOR_SUPPLY("vcc", "4-0064"),
+};
+
+struct regulator_init_data pcm049_vcc_3v3_initdata = {
+	.consumer_supplies = pcm049_vcc_3v3_consumer_supply,
+	.num_consumer_supplies = ARRAY_SIZE(pcm049_vcc_3v3_consumer_supply),
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config pcm049_vcc_3v3_config = {
+	.supply_name		= "pcm049_vcc_3v3",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &pcm049_vcc_3v3_initdata,
+};
+
+static struct platform_device pcm049_vcc_3v3_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &pcm049_vcc_3v3_config,
+	},
+};
+
+static struct regulator_init_data pcm049_vusim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct stmpe_gpio_platform_data pba_gpio_stm_data = {
+	.gpio_base = -1,
+	.norequest_mask = STMPE_GPIO_NOREQ_811_TOUCH,
+};
+
+static struct stmpe_ts_platform_data pba_ts_stm_pdata = {
+	.sample_time = 4,
+	.mod_12b = 1,
+	.ref_sel = 0,
+	.adc_freq = 1,
+	.ave_ctrl = 3,
+	.touch_det_delay = 3,
+	.settling = 3,
+	.fraction_z = 7,
+	.i_drive = 0,
+};
+
+static struct stmpe_platform_data pba_stm_pdata = {
+	.blocks = STMPE_BLOCK_GPIO | STMPE_BLOCK_TOUCHSCREEN,
+	.irq_base = TWL6030_IRQ_END,
+	.irq_trigger = IRQF_TRIGGER_RISING,
+	.irq_invert_polarity = true,
+	.gpio = &pba_gpio_stm_data,
+	.ts = &pba_ts_stm_pdata,
+};
+
+static struct pca9532_platform_data pba_pca9532 = {
+	.leds = {
+		{
+			.name = "board:red:free_use1",
+			.state = PCA9532_OFF,
+			.type = PCA9532_TYPE_LED,
+		}, {
+			.name = "board:yellow:free_use2",
+			.state = PCA9532_OFF,
+			.type = PCA9532_TYPE_LED,
+		}, {
+			.name = "board:yellow:free_use3",
+			.state = PCA9532_OFF,
+			.type = PCA9532_TYPE_LED,
+		}, {
+			.name = "board:green:free_use4",
+			.state = PCA9532_OFF,
+			.type = PCA9532_TYPE_LED,
+		},
+	},
+	.psc = { 1, 1 },
+	.pwm = { 1, 1 },
+};
+
+static struct i2c_board_info __initdata pcm049_i2c_1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x57), /* E0=1, E1=1, E2=1 */
+		.platform_data = &board_eeprom,
+	},
+};
+
+static struct i2c_board_info __initdata pcm049_i2c_3_boardinfo[] = {
+};
+
+static struct i2c_board_info __initdata pcm049_i2c_4_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("stmpe811", 0x41),	/* Touch controller */
+		.irq = OMAP_GPIO_IRQ(OMAP4_PCM049_STMPE811_GPIO_IRQ),
+		.platform_data = &pba_stm_pdata,
+	}, {
+		I2C_BOARD_INFO("max1037", 0x64),	/* A/D converter */
+	}, {
+		I2C_BOARD_INFO("pca9533", 0x62),	/* Leds pca9533 */
+		.platform_data = &pba_pca9532,
+	}
+};
+
+static struct twl4030_platform_data pcm049_twldata = {
+	.vusim		= &pcm049_vusim,
+};
+
+static int __init pcm049_i2c_init(void)
+{
+	/* I2C1 */
+	omap4_pmic_get_config(&pcm049_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
+	omap4_pmic_init("twl6030", &pcm049_twldata);
+	i2c_register_board_info(1, pcm049_i2c_1_boardinfo,
+				ARRAY_SIZE(pcm049_i2c_1_boardinfo));
+
+	/* I2C3 */
+	omap_register_i2c_bus(3, 400, pcm049_i2c_3_boardinfo,
+				ARRAY_SIZE(pcm049_i2c_3_boardinfo));
+
+	/* I2C4 */
+	if (omap_mux_init_gpio(OMAP4_PCM049_STMPE811_GPIO_IRQ, OMAP_PIN_INPUT))
+		printk(KERN_ERR "Failed to mux GPIO%d for STMPE811 IRQ\n",
+			OMAP4_PCM049_STMPE811_GPIO_IRQ);
+	else if (gpio_request(OMAP4_PCM049_STMPE811_GPIO_IRQ, "STMPE811 irq"))
+		printk(KERN_ERR "Failed to request GPIO%d for STMPE811 IRQ\n",
+			OMAP4_PCM049_STMPE811_GPIO_IRQ);
+	else
+		gpio_direction_input(OMAP4_PCM049_STMPE811_GPIO_IRQ);
+
+	omap_register_i2c_bus(4, 400, pcm049_i2c_4_boardinfo,
+				ARRAY_SIZE(pcm049_i2c_4_boardinfo));
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+
+	/* dispc2_data23 */
+	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data22 */
+	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data21 */
+	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data20 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data19 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data18 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data15 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data14 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data13 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data12 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data11 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data10 */
+	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data9 */
+	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data16 */
+	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data17 */
+	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_hsync */
+	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_pclk */
+	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_vsync */
+	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_de */
+	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data8 */
+	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data7 */
+	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data6 */
+	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data5 */
+	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data4 */
+	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data3 */
+	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data2 */
+	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data1 */
+	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data0 */
+	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+	OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+			 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+			 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+	OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+			 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_board_data serial2_data __initdata = {
+	.id             = 1,
+	.pads           = serial2_pads,
+	.pads_cnt       = ARRAY_SIZE(serial2_pads),
+};
+
+static struct omap_board_data serial3_data __initdata = {
+	.id             = 2,
+	.pads           = serial3_pads,
+	.pads_cnt       = ARRAY_SIZE(serial3_pads),
+};
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init_port(&serial2_data);
+	omap_serial_init_port(&serial3_data);
+}
+#else
+#define board_mux	NULL
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init();
+}
+#endif
+
+/* Display */
+static int pcm049_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	return gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 1);
+}
+
+static void pcm049_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 0);
+	return;
+}
+
+/* Using generic display panel */
+static struct panel_generic_dpi_data omap4_dpi_panel = {
+	.name			= "pd050vl1",
+	.platform_enable	= pcm049_panel_enable_lcd,
+	.platform_disable	= pcm049_panel_disable_lcd,
+};
+
+struct omap_dss_device pcm049_dpi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dpi",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &omap4_dpi_panel,
+	.phy.dpi.data_lines	= 24,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+static void pcm049_dvi_mux_init(void)
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
+static struct omap_dss_device  pcm049_dvi_device = {
+	.name = "dvi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.clocks	= {
+		.dispc	= {
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+		.hdmi	= {
+			.regn	= 15,
+			.regm2	= 1,
+		},
+	},
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *pcm049_dss_devices[] = {
+	&pcm049_dpi_device,
+	&pcm049_dvi_device,
+};
+
+static struct omap_dss_board_info pcm049_dss_data = {
+	.num_devices	= ARRAY_SIZE(pcm049_dss_devices),
+	.devices	= pcm049_dss_devices,
+	.default_device = &pcm049_dpi_device,
+};
+
+void pcm049_display_init(void)
+{
+	omap_mux_init_gpio(OMAP4_PCM049_LCD_ENABLE, OMAP_PIN_OUTPUT);
+
+	if ((gpio_request(OMAP4_PCM049_LCD_ENABLE, "DISP_ENA") == 0) &&
+		(gpio_direction_output(OMAP4_PCM049_LCD_ENABLE, 1) == 0)) {
+		gpio_export(OMAP4_PCM049_LCD_ENABLE, 0);
+		gpio_set_value(OMAP4_PCM049_LCD_ENABLE, 0);
+	} else
+		printk(KERN_ERR "could not obtain gpio for DISP_ENA");
+	pcm049_dvi_mux_init();
+	omap_display_init(&pcm049_dss_data);
+}
+
+static struct platform_device *pcm049_devices[] __initdata = {
+	&pcm049_vcc_3v3_device,
+	&leds_gpio,
+};
+
+#define	TWL_PHOENIX_DEV_ON	0x25
+
+static void pcm049_power_off(void)
+{
+	printk(KERN_INFO "Goodbye phyCORE OMAP4!\n");
+	twl_i2c_write_u8(TWL6030_MODULE_ID0, 0x7, TWL_PHOENIX_DEV_ON);
+}
+
+
+static void __init pcm049_init(void)
+{
+	pm_power_off = pcm049_power_off;
+	omap4_mux_init(board_mux, NULL, OMAP_PACKAGE_CBS);
+	pcm049_init_smsc911x();
+	pcm049_i2c_init();
+	platform_add_devices(pcm049_devices, ARRAY_SIZE(pcm049_devices));
+	board_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	omap4_ehci_init();
+	usb_musb_init(&musb_board_data);
+	pcm049_display_init();
+}
+
+static void __init pcm049_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
+
+MACHINE_START(PCM049, "phyCORE OMAP4")
+	/* Maintainer: Jan Weitzel - Phytec Messtechnik GmbH */
+	.boot_params	= 0x80000100,
+	.reserve	= omap_reserve,
+	.map_io		= pcm049_map_io,
+	.init_early	= pcm049_init_early,
+	.init_irq	= gic_init_irq,
+	.init_machine	= pcm049_init,
+	.timer		= &omap4_timer,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 2b71b17..cb4a6c2 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -166,6 +166,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		/* omap4 based boards using UART3 */
 		DEBUG_LL_OMAP4(3, omap_4430sdp);
 		DEBUG_LL_OMAP4(3, omap4_panda);
+		DEBUG_LL_OMAP4(3, pcm049);
 
 		/* zoom2/3 external uart */
 		DEBUG_LL_ZOOM(omap_zoom2);