From: Sergei Shtylyov <sshtylyov@mvista.com>
To: Jan Weitzel <j.weitzel@phytec.de>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
tony@atomide.com
Subject: Re: [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile
Date: Fri, 08 Jul 2011 15:49:35 +0400 [thread overview]
Message-ID: <4E16EECF.7030102@mvista.com> (raw)
In-Reply-To: <1310119464-3514-2-git-send-email-j.weitzel@phytec.de>
Hello.
On 08-07-2011 14:04, Jan Weitzel wrote:
> Signed-off-by: Jan Weitzel<j.weitzel@phytec.de>
> ---
> arch/arm/mach-omap2/Kconfig | 5 +++++
> arch/arm/mach-omap2/Makefile | 4 ++++
> 2 files changed, 9 insertions(+), 0 deletions(-)
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 19d5891..c6a2d43 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
[...]
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index b148077..e81b594 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -238,6 +238,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
> hsmmc.o \
> omap_phy_internal.o
>
> +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
You need to first add board-omap4pcm049.c, and only then wire it to the
Makefile. You could do both in onme patch though...
WBR, Sergei
WARNING: multiple messages have this Message-ID (diff)
From: sshtylyov@mvista.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile
Date: Fri, 08 Jul 2011 15:49:35 +0400 [thread overview]
Message-ID: <4E16EECF.7030102@mvista.com> (raw)
In-Reply-To: <1310119464-3514-2-git-send-email-j.weitzel@phytec.de>
Hello.
On 08-07-2011 14:04, Jan Weitzel wrote:
> Signed-off-by: Jan Weitzel<j.weitzel@phytec.de>
> ---
> arch/arm/mach-omap2/Kconfig | 5 +++++
> arch/arm/mach-omap2/Makefile | 4 ++++
> 2 files changed, 9 insertions(+), 0 deletions(-)
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 19d5891..c6a2d43 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
[...]
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index b148077..e81b594 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -238,6 +238,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
> hsmmc.o \
> omap_phy_internal.o
>
> +obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \
You need to first add board-omap4pcm049.c, and only then wire it to the
Makefile. You could do both in onme patch though...
WBR, Sergei
next prev parent reply other threads:[~2011-07-08 11:50 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-08 10:04 [PATCH 0/3] ARM:OMAP4 add Phytec phyCORE-OMAP4 board Jan Weitzel
2011-07-08 10:04 ` Jan Weitzel
2011-07-08 10:04 ` [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile Jan Weitzel
2011-07-08 10:04 ` Jan Weitzel
2011-07-08 11:49 ` Sergei Shtylyov [this message]
2011-07-08 11:49 ` Sergei Shtylyov
2011-07-08 11:55 ` Tony Lindgren
2011-07-08 11:55 ` Tony Lindgren
2011-07-08 11:58 ` Felipe Balbi
2011-07-08 11:58 ` Felipe Balbi
2011-07-14 7:27 ` Tony Lindgren
2011-07-14 7:27 ` Tony Lindgren
2011-07-14 7:47 ` Tony Lindgren
2011-07-14 7:47 ` Tony Lindgren
2011-07-08 12:21 ` [PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board Jan Weitzel
2011-07-08 12:21 ` Jan Weitzel
2011-07-13 8:03 ` Tony Lindgren
2011-07-13 8:03 ` Tony Lindgren
2011-07-13 10:58 ` Jan Weitzel
2011-07-13 10:58 ` Jan Weitzel
2011-07-13 10:59 ` [PATCH] ARM: OMAP4: PCM049: remove vusim regulator Jan Weitzel
2011-07-13 10:59 ` Jan Weitzel
2011-07-13 12:13 ` Sergei Shtylyov
2011-07-13 12:13 ` Sergei Shtylyov
2011-07-13 12:54 ` [PATCH v2] " Jan Weitzel
2011-07-13 12:54 ` Jan Weitzel
2011-07-13 12:56 ` [PATCH] " Jan Weitzel
2011-07-13 12:56 ` Jan Weitzel
2011-07-14 7:34 ` Tony Lindgren
2011-07-14 7:34 ` Tony Lindgren
2011-07-14 8:39 ` Jan Weitzel
2011-07-14 8:39 ` Jan Weitzel
2011-07-15 7:50 ` Tony Lindgren
2011-07-15 7:50 ` Tony Lindgren
2011-07-15 7:58 ` Felipe Balbi
2011-07-15 7:58 ` Felipe Balbi
2011-07-15 8:20 ` Tony Lindgren
2011-07-15 8:20 ` Tony Lindgren
2011-07-15 8:31 ` Felipe Balbi
2011-07-15 8:31 ` Felipe Balbi
2011-07-15 10:59 ` Tony Lindgren
2011-07-15 10:59 ` Tony Lindgren
2011-07-15 9:47 ` Jan Weitzel
2011-07-15 9:47 ` Jan Weitzel
2011-07-15 10:55 ` Tony Lindgren
2011-07-15 10:55 ` Tony Lindgren
2011-07-15 16:06 ` [RFC 0/2] join omap4panda and pcm049 Jan Weitzel
2011-07-18 8:42 ` Tony Lindgren
2011-07-19 11:45 ` [RFC 0/2 v2] " Jan Weitzel
2011-07-19 11:45 ` [RFC 1/2] omap4: board-omap4panda: prepare for join Jan Weitzel
2011-07-21 7:25 ` Tony Lindgren
2011-07-19 11:45 ` [RFC 2/2] omap4: board-omap4pcm049: add Phytec phyCORE-OMAP4 Jan Weitzel
2011-07-21 7:38 ` Tony Lindgren
2011-07-15 16:06 ` [PATCH 1/2] omap4: board-omap4panda: prepare for join Jan Weitzel
2011-07-15 16:06 ` [PATCH 2/2] omap4: board-omap4panda: join Phytec phyCORE-OMAP4 Jan Weitzel
2011-07-08 10:04 ` [PATCH 2/3] ARM: OMAP4: add pcm049 DEBUGLL Jan Weitzel
2011-07-08 10:04 ` Jan Weitzel
2011-07-08 10:04 ` [PATCH 3/3] ARM: OMAP4: platformcode board-omap4pcm049.c Jan Weitzel
2011-07-08 10:04 ` Jan Weitzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E16EECF.7030102@mvista.com \
--to=sshtylyov@mvista.com \
--cc=j.weitzel@phytec.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.