* Warn/panics booting Konrad's master tree under xen 4.1.1
@ 2011-07-23 19:40 Sander Eikelenboom
2011-07-25 14:44 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 4+ messages in thread
From: Sander Eikelenboom @ 2011-07-23 19:40 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 11059 bytes --]
Hi Konrad,
I have tried your current master tree (commit 602d7a606974c54dc8bd61527c051d7d697a5f86) as domU (under xen 4.1.1 and a 2.6.32.35 dom0), that seems to work fine.
I have tried to use the same kernel as dom0 as well, but i get the warns/panic below, when i boot the kernel bare metal it works ok.
Complete serial log is attached, i have re-compiled with and without pv-spinlocks but there is no difference.
Also xen-pciback compiled in, with xen-pciback.hide as kernel boot parameter doesn't seem to seize the devices.
--
Sander
4.531095] f7188[ 5.139554] R10: 0000000000000000 R11: 0000000000000001 R12: 00007fffffffd000
[ 5.139556] R13: ffff8800204d4000 R14: ffff880020007548 R15: 0000000020e09000
[ 5.139560] FS: 00007fc956118700(0000) GS:ffff88002f040000(0000) knlGS:0000000000000000
[ 5.139562] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 5.139564] CR2: ffff880020e0a000 CR3: 0000000001a4d000 CR4: 0000000000000660
[ 5.139566] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.139568] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 5.139570] Process init (pid: 1726, threadinfo ffff880020006000, task ffff8800231463c0)
[ 5.139572] Stack:
[ 5.139574] ffff880020007588 ffffffff811006c8 0000000000000000 0000000000000000
[ 5.139579] 0000000000000000 000000021a6ec675 0000000000000001 ffff880020007600
[ 5.139584] 0000000000000000 ffff8800204d4000 00007fffffffefff ffffffffffffffff
[ 5.139589] Call Trace:
[ 5.139592] [<ffffffff811006c8>] unmap_vmas+0x468/0x9f0
[ 5.139596] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 5.139600] [<ffffffff81007fa0>] ? xen_clocksource_read+0x20/0x30
[ 5.139603] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 5.139607] [<ffffffff81053e01>] exit_mm+0x131/0x170
[ 5.139610] [<ffffffff81055c04>] do_exit+0x174/0x860
[ 5.139613] [<ffffffff81765eb0>] ? _raw_spin_unlock_irqrestore+0x40/0x80
[ 5.139617] [<ffffffff81051dda>] ? kmsg_dump+0x4a/0x100
[ 5.139620] [<ffffffff810080f2>] ? check_events+0x12/0x20
[ 5.139623] [<ffffffff8100f62d>] oops_end+0x9d/0xd0
[ 5.139627] [<ffffffff8103323b>] no_context+0xfb/0x260
[ 5.139630] [<ffffffff81004651>] ? pte_mfn_to_pfn+0x91/0xf0
[ 5.139633] [<ffffffff810334c5>] __bad_area_nosemaphore+0x125/0x1f0
[ 5.139638] [<ffffffff81004169>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[ 5.139641] [<ffffffff810335a3>] bad_area_nosemaphore+0x13/0x20
[ 5.139644] [<ffffffff81033ad5>] do_page_fault+0x2f5/0x490
[ 5.139648] [<ffffffff810080df>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 5.139652] [<ffffffff810e2173>] ? __alloc_pages_nodemask+0x113/0x720
[ 5.139657] [<ffffffff8133e1aa>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[ 5.139663] [<ffffffff817665c5>] page_fault+0x25/0x30
[ 5.139666] [<ffffffff8110016e>] ? __tlb_remove_page+0x9e/0xc0
[ 5.139670] [<ffffffff81100164>] ? __tlb_remove_page+0x94/0xc0
[ 5.139673] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
[ 5.139677] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 5.139680] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 5.139683] [<ffffffff811271b6>] flush_old_exec+0x556/0x800
[ 5.139686] [<ffffffff8116f4a3>] load_elf_binary+0x323/0x1c60
[ 5.139690] [<ffffffff810fd813>] ? follow_page+0x393/0x4f0
[ 5.139693] [<ffffffff810fdff1>] ? __get_user_pages+0x191/0x620
[ 5.139697] [<ffffffff8116c6e9>] ? load_misc_binary+0x89/0x3c0
[ 5.139701] [<ffffffff810fe532>] ? get_user_pages+0x52/0x60
[ 5.139704] [<ffffffff8112638c>] ? get_arg_page+0x5c/0x100
[ 5.139707] [<ffffffff81126913>] search_binary_handler+0xd3/0x2e0
[ 5.139710] [<ffffffff8116f180>] ? elf_map+0x1d0/0x1d0
[ 5.139714] [<ffffffff8112853f>] do_execve_common+0x22f/0x2e0
[ 5.139717] [<ffffffff8111c212>] ? kmem_cache_alloc+0x72/0x150
[ 5.139720] [<ffffffff8112867a>] do_execve+0x3a/0x40
[ 5.139723] [<ffffffff8101551a>] sys_execve+0x4a/0x80
[ 5.139727] [<ffffffff817670bc>] stub_execve+0x6c/0xc0
[ 5.139729] Code: 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 65 8b 04 25 50 dc 00 00 85 c0 75 0e 65 c7 04 25
50 dc 00 00 01 00 00 00 c9 c3 <0f> 0b eb fe 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 66 66 66
[ 5.139783] RIP [<ffffffff8102fe33>] paravirt_enter_lazy_mmu+0x23/0x30
[ 5.139787] RSP <ffff880020007448>
[ 5.139789] ---[ end trace 09caa95ef9593519 ]---
[ 6.455861] udlfb: Reallocating framebuffer. Addresses will change!
[ 6.531120] ------------[ cut here ]------------
[ 6.532810] WARNING: at lib/dma-debug.c:875 check_for_stack+0xad/0xf0()
[ 6.532810] Hardware name: MS-7640
[ 6.532810] ehci_hcd 0000:07:01.2: DMA-API: device driver maps memory fromstack [addr=ffff880023321960]
[ 6.532810] Modules linked in:
[ 6.532810] Pid: 563, comm: khubd Tainted: G D 3.0.0-xen-3.1-konrad-master-20110722+ #1
[ 6.532810] Call Trace:
[ 6.532810] [<ffffffff8105180f>] warn_slowpath_common+0x7f/0xc0
[ 6.532810] [<ffffffff81051906>] warn_slowpath_fmt+0x46/0x50
[ 6.532810] [<ffffffff813517dd>] check_for_stack+0xad/0xf0
[ 6.532810] [<ffffffff81353389>] debug_dma_map_page+0x179/0x1e0
[ 6.532810] [<ffffffff814e9a0c>] usb_hcd_map_urb_for_dma+0x5ec/0x6a0
[ 6.532810] [<ffffffff814e9c6e>] usb_hcd_submit_urb+0x14e/0x780
[ 6.532810] [<ffffffff8110d360>] ? __vmalloc_node_range+0x140/0x1e0
[ 6.532810] [<ffffffff813a5e02>] ? dlfb_setup_modes+0x512/0x580
[ 6.532810] [<ffffffff814eb365>] usb_submit_urb+0xe5/0x2b0
[ 6.532810] [<ffffffff814ecae3>] usb_start_wait_urb+0x63/0x100
[ 6.532810] [<ffffffff814eba18>] ? usb_init_urb+0x28/0x40
[ 6.532810] [<ffffffff814ecdc8>] usb_control_msg+0xe8/0x120
[ 6.532810] [<ffffffff813a7b11>] dlfb_usb_probe+0x441/0x850
[ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
[ 6.532810] [<ffffffff814eee66>] usb_probe_interface+0x106/0x1c0
[ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
[ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
[ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
[ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
[ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
[ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
[ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
[ 6.532810] [<ffffffff814edd4e>] usb_set_configuration+0x45e/0x690
[ 6.532810] [<ffffffff811917ea>] ? sysfs_do_create_link+0xfa/0x220
[ 6.532810] [<ffffffff814f6914>] generic_probe+0x44/0xa0
[ 6.532810] [<ffffffff814ee1da>] usb_probe_device+0x1a/0x20
[ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
[ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
[ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
[ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
[ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
[ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
[ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
[ 6.532810] [<ffffffff814ed8d9>] ? usb_cache_string+0x99/0xb0
[ 6.532810] [<ffffffff814e5a27>] usb_new_device+0x167/0x1f0
[ 6.532810] [<ffffffff814e72f8>] hub_thread+0xba8/0x1330
[ 6.532810] [<ffffffff8176331f>] ? schedule+0x42f/0xa70
[ 6.532810] [<ffffffff81074e20>] ? wake_up_bit+0x40/0x40
[ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
[ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
[ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
[ 6.532810] [<ffffffff810748d6>] kthread+0x96/0xa0
[ 6.532810] [<ffffffff81767a64>] kernel_thread_helper+0x4/0x10
[ 6.532810] [<ffffffff81766341>] ? retint_restore_args+0x13/0x13
[ 6.532810] [<ffffffff81767a60>] ? gs_change+0x13/0x13
[ 6.532810] ---[ end trace 09caa95ef959351a ]---
[ 29.224385] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
[ 29.233168] BUG: unable to handle kernel paging request at ffff880020221000
[ 29.236056] IP: [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.244097] PGD 1a4e067 PUD 1a52067 PMD 2ff67067 PTE 8010000020221064
[ 29.244097] Oops: 0002 [#3] SMP DEBUG_PAGEALLOC
[ 29.256140] CPU 5
[ 29.256140] Modules linked in:
[ 29.256140]
[ 29.256140] Pid: 1785, comm: modprobe Tainted: G D W 3.0.0-xen-3.1-konrad-master-20110722+ #1 MSI MS-7640/890F
XA-GD70 (MS-7640)
[ 29.256140] RIP: e030:[<ffffffff8110016e>] [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.256140] RSP: e02b:ffff88002024fc38 EFLAGS: 00010286
[ 29.256140] RAX: 0000000000000000 RBX: ffff88002024fd98 RCX: ffff880020221000
[ 29.256140] RDX: ffff880020221000 RSI: ffff88002f0f8000 RDI: 0000000000000000
[ 29.256140] RBP: ffff88002024fc48 R08: 00003ffffffff000 R09: ffff880000000000
[ 29.256140] R10: 0000000000000000 R11: ffffffff81af32d0 R12: 0000000000407000
[ 29.256140] R13: ffff88002876c3c8 R14: ffff88002024fd48 R15: ffff8800200c4680
[ 29.256140] FS: 00007f3469119700(0000) GS:ffff88002f0a8000(0000) knlGS:0000000000000000
[ 29.256140] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 29.256140] CR2: ffff880020221000 CR3: 0000000001a4d000 CR4: 0000000000000660
[ 29.256140] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 29.256140] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 29.256140] Process modprobe (pid: 1785, threadinfo ffff88002024e000, task ffff880023318000)
[ 29.256140] Stack:
[ 29.256140] 0000000000000006 ffff8800201c7038 ffff88002024fd88 ffffffff8110086d
[ 29.256140] ffffffff810080f2 0000000000000246 0000000000000000 0000000000000000
[ 29.256140] ffffffff81afcce8 ffff88002024fe00 0000000000000000 ffff8800200c4680
[ 29.256140] Call Trace:
[ 29.256140] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
[ 29.256140] [<ffffffff810080f2>] ? check_events+0x12/0x20
[ 29.256140] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 29.256140] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 29.256140] [<ffffffff81053e01>] exit_mm+0x131/0x170
[ 29.256140] [<ffffffff81055c04>] do_exit+0x174/0x860
[ 29.256140] [<ffffffff8111ba30>] ? kmem_cache_free+0x20/0x130
[ 29.256140] [<ffffffff81056345>] do_group_exit+0x55/0xf0
[ 29.256140] [<ffffffff810563f7>] sys_exit_group+0x17/0x20
[ 29.256140] [<ffffffff81766c42>] system_call_fastpath+0x16/0x1b
[ 29.256140] Code: e8 68 f2 00 00 48 83 c4 08 b8 01 00 00 00 5b c9 c3 0f 1f 40 00 31 f6 bf 00 02 00 00 e8 cc 26 fe ff
48 89 c1 31 c0 48 85 c9 74 a2
[ 29.256140] c7 01 00 00 00 00 c7 41 08 00 00 00 00 c7 41 0c fe 01 00 00
[ 29.256140] RIP [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.256140] RSP <ffff88002024fc38>
[ 29.256140] CR2: ffff880020221000
[ 29.256140] ---[ end trace 09caa95ef959351b ]---
[ 29.256140] Fixing recursive fault but reboot is needed!
[-- Attachment #2: serial-log.txt --]
[-- Type: text/plain, Size: 123072 bytes --]
\ // _ \ '_ \ || |_ | | | |
\ __/ | | | | _|| |_| |
/\_\___|_| |_| _|(_)_(_)_|
(XENXen version 4.1.(root@dyndns.org(gcc version 4.4 (Debian 4.4.5-8) Thu Jun 16 11::46 CEST 2011
(N) Latest Changet: Tue Jun 14 142:48 2011 +0100 079:73a8061b01f1(XEN) BootloaderGRUB 1.98+201008-14
(XEN) Comma line: dom0_mem=8M loglvl=all lovl_guest=all conle_timestamps vga=gfx-1280x1024x3cpuidle cpufreq=n noreboot d
ebugapic=debug apic_rbosity=debug ap=debug acpi_enfoe_resources=lax mmu=on,amd-iommuebug amd_iommu=oamd-iommu-debug m1=1
15200,8n1 coole=vga,com1
(X) Video information:
(XEN) V is graphics mod1280x1024, 32 bp
(XEN) VBE/DDC thods: V2; EDID ansfer time: 1 sonds
(XEN) Discnformation:
(XE Found 2 MBR siatures
(XEN) Fnd 2 EDD informaon structures
(N) Xen-e820 RAM map:
(XEN) 00000000000000 - 0000000009f000 (usle)
(XEN) 0000000009f000 - 000000000a0000 (resved)
(XEN) 000000000e4000 - 00000000100000 (rerved)
(XEN) 00000000100000 - 000000aff90000 (uble)
(XEN) 00000000aff90000 -0000000aff9e000 CPI data)
(XEN)00000000aff9e000 00000000affe000(ACPI NVS)
(XEN 00000000affe000- 00000000b00000 (reserved)
(XE 00000000ffe000 - 00000001000000 (reserved)
(X) 000000010000000 - 00000002500000 (usable)
(XEN) ACPI: RSDP 000FB100, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT AFF90000, 0048 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: FACP AFF90200, 0084 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: DSDT AFF905E0, 9427 (r1 A7640 A7640100 100 INTL 20051117)
(XEN) ACPI: FACS AFF9E000, 0040
(XEN) ACPI: APIC AFF90390, 0088 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: MCFG AFF90420, 003C (r1 7640MS OEMMCFG 20100913 MSFT 97)
(XEN) ACPI: SLIC AFF90460, 0176 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: OEMB AFF9E040, 0072 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: SRAT AFF9A5E0, 0108 (r3 AMD FAM_F_10 2 AMD 1)
(XEN) ACPI: HPET AFF9A6F0, 0038 (r1 7640MS OEMHPET 20100913 MSFT 97)
(XEN) ACPI: IVRS AFF9A730, 0100 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT AFF9A830, 0DA4 (r1 A M I POWERNOW 1 AMD 1)
(XEN) System RAM: 8191MB (8387772kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-b0000000
(XEN) SRAT: Node 0 PXM 0 100000000-250000000
(XEN) NUMA: Allocated memnodemap from 24df04000 - 24df07000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) vesafb: framebuffer at 0xfb000000, mapped to 0xffff82c000000000, using 6144k, total 14336k
(XEN) vesafb: mode is 1280x1024x32, linelength=5120, font 8x16
(XEN) vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[aff9e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 0:10 APIC version 16
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
(XEN) mapped IOAPIC to ffff82c3ffffc000 (fec20000)
(XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3200.204 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) AMD-Vi: Found MSI capability block
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0x100
(XEN) AMD-Vi: Revision 0x1
(XEN) AMD-Vi: CheckSum 0xc3
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id RD890S
(XEN) AMD-Vi: OEM_Revision 0x202031
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0x0
(XEN) AMD-Vi: IVRS Block:
(XEN) AMD-Vi: Type 0x10
(XEN) AMD-Vi: Flags 0x3e
(XEN) AMD-Vi: Length 0xd0
(XEN) AMD-Vi: Dev_Id 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x0 -> 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x10
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xb00
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x18
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0xa00
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0xa00 -> 0xa07
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x28
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x900
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x30
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x800
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x50
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x600
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x0
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x43
(XEN) AMD-Vi: Dev_Id 0x708
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x708 -> 0x7ff
(XEN) AMD-Vi: Dev_Id Alias: 0x700
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x58
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x500
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x500 -> 0x501
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x68
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x400
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x400 -> 0x407
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x88
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x90
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x90 -> 0x92
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x98
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x98 -> 0x9a
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa0
(XEN) AMD-Vi: Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa1
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa3
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa4
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x43
(XEN) AMD-Vi: Dev_Id 0x300
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0x300 -> 0x3ff
(XEN) AMD-Vi: Dev_Id Alias: 0xa4
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa5
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa8
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa9
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x100
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0xb0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Dev_Id Range: 0xb0 -> 0xb2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x0
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x48
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x48
(XEN) AMD-Vi: Dev_Id 0x0
(XEN) AMD-Vi: Flags 0x0
(XEN) AMD-Vi: Add device table entry: device id = 0x0000, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0001, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0002, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0010, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0018, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0028, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0030, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0050, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0058, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0068, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0088, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0090, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0091, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0092, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0098, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0099, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x009a, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a0, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a1, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a3, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a4, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a5, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a8, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00a9, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00b0, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00b1, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x00b2, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0100, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0400, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0401, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0402, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0403, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0404, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0405, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0406, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0407, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0500, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0501, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0600, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0700, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0800, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0900, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a00, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a01, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a02, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a03, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a04, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a05, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a06, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0a07, interupt table = 0x24ded0000
(XEN) AMD-Vi: Add device table entry: device id = 0x0b00, interupt table = 0x24ded0000
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7,
7-8, 7-9, 7-10, 7-11, 7-12, 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, 7-26, 7-27, 7
-28, 7-29, 7-30, 7-31 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #6 registers: 24.
(XEN) number of IO-APIC #7 registers: 32.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #6......
(XEN) .... register #00: 06000000
(XEN) ....... : physical APIC id: 06
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 06000000
(XEN) ....... : arbitration: 06
(XEN) .... register #03: 07000000
(XEN) ....... : Boot DT : 0
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 40
(XEN) 06 001 01 0 0 0 0 0 1 1 48
(XEN) 07 001 01 0 0 0 0 0 1 1 50
(XEN) 08 001 01 0 0 0 0 0 1 1 58
(XEN) 09 001 01 1 1 0 1 0 1 1 60
(XEN) 0a 001 01 0 0 0 0 0 1 1 68
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #7......
(XEN) .... register #00: 07000000
(XEN) ....... : physical APIC id: 07
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 001F8021
(XEN) ....... : max redirection entries: 001F
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 001 0 0 0 0 0 0 0
(XEN) 18 000 001 0 0 0 0 0 0 0
(XEN) 19 000 001 0
0 0 0 0 0 0
(XEN) 1a 000 001 0 0 0 0 0 0 0
(XEN) 1b 000 001 0 0 0 0 0 0 0
(XEN) 1c 000 001 0 0 0 0 0 0 0
(XEN) 1d 000 001 0 0 0 0 0 0 0
(XEN) 1e 000 001 0
0 0 0 0 0 0
(XEN) 1f 000 001 0 0 0 0 0 0 0
(XEN) Using vect-based indexing(XEN) IRQ to pinappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0
(XEN) IRQ56 -> 0
(XEN) IRQ241 -> 4
(XEN) IRQ64 -> 0
(XEN) IRQ72 -> 0
(XEN) IRQ80 -> 0
(XEN) IRQ88 -> 0
(XEN) IRQ96 -> 0
(XEN) IRQ104 -> 10
(XEN) IRQ112 -> 11
(XEN) IRQ120 -> 12
(XEN) IRQ136 -> 13
(XEN) IRQ144 -> 14
(XEN) IRQ152 -> 15
(XEN) ................................. done.
(XEN) Using locaAPIC timer interpts.
(XEN) calibratinAPIC timer ...
(XEN) ..... CPU ock speed is 3201421 MHz.
(XEN) ..... hostus clock speed i200.0088 MHz.
(XEN) ..... bus_ale = 0x0000CCD7(XEN) [2011-07-218:11:20] Platform timer is 14.318MHz HPET
ÿ(XEN) [2011-07-23 18:11:20] Allocated console ring of 64 KiB.
(XEN) [2011-07-23 18:11:20] HVM: ASIDs enabled.
(XEN) [2011-07-23 18:11:20] SVM: Supported advanced features:
(XEN) [2011-07-23 18:11:20] - Nested Page Tables (NPT)
(XEN) [2011-07-23 18:11:20] - Last Branch Record (LBR) Virtualisation
(XEN) [2011-07-23 18:11:20] - Next-RIP Saved on #VMEXIT
(XEN) [2011-07-23 18:11:20] - Pause-Intercept Filter
(XEN) [2011-07-23 18:11:20] HVM: SVM enabled
(XEN) [2011-07-23 18:11:20] HVM: Hardware Assisted Paging detected.
(XEN) [2011-07-23 18:11:19] masked ExtINT on CPU#1
(XEN) [2011-07-23 18:11:19] masked ExtINT on CPU#2
(XEN) [2011-07-23 18:11:19] masked ExtINT on CPU#3
(XEN) [2011-07-23 18:11:19] masked ExtINT on CPU#4
(XEN) [2011-07-23 18:11:19] masked ExtINT on CPU#5
(XEN) [2011-07-23 18:11:20] Brought up 6 CPUs
(XEN) [2011-07-23 18:11:20] HPET's MSI mode hasn't been supported when Interrupt Remapping is enabled.
(XEN) [2011-07-23 18:11:20] ACPI sleep modes: S3
(XEN) [2011-07-23 18:11:20] MCA: Use hw thresholding to adjust polling frequency
(XEN) [2011-07-23 18:11:20] mcheck_poll: Machine check polling timer started.
(XEN) [2011-07-23 18:11:20] Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff
(XEN) [2011-07-23 18:11:20] *** LOADING DOMAIN 0 ***
(XEN) [2011-07-23 18:11:20] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xa49000
(XEN) [2011-07-23 18:11:20] elf_parse_binary: phdr: paddr=0x1a49000 memsz=0xc02c0
(XEN) [2011-07-23 18:11:20] elf_parse_binary: phdr: paddr=0x1b0a000 memsz=0xd60
(XEN) [2011-07-23 18:11:20] elf_parse_binary: phdr: paddr=0x1b0b000 memsz=0x12ac0
(XEN) [2011-07-23 18:11:20] elf_parse_binary: phdr: paddr=0x1b1e000 memsz=0x2f6000
(XEN) [2011-07-23 18:11:20] elf_parse_binary: memory: 0x1000000 -> 0x1e14000
(XEN) [2011-07-23 18:11:20] elf_xen_parse_note: GUEST_OS = "linux"
EN) [2011-07-23 :11:20] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2011-07-23 18:11:2 elf_xen_parse_ne: XEN_VERSION =xen-3.0"
(XEN) 011-07-23 18:11:] elf_xen_parse_te: VIRT_BASE = ffffffff80000000(XEN) [2011-07-218:11:20] elf_xeparse_note: ENTR=
0xffffffff81b100
(XEN) [2011--23 18:11:20] elf_xen_parse_note:YPERCALL_PAGE = ffffffff81001000(XEN) [2011-07-218:11:20] elf_xeparse_note:
FEATES = "!writable_ge_tables|pae_pgr_above_4gb"
(X) [2011-07-23 181:20] elf_xen_pae_note: PAE_MODE "yes"
(XEN) [2011-07-23 18:110] elf_xen_parseote: LOADER = "geric"
(XEN) [20-07-23 18:11:20]lf_xen_parse_not unknown xen elfote (0xd)
(XEN)2011-07-23 18:110] elf_xen_parseote: SUSPEND_CANL = 0x1
(XEN) [11-07-23 18:11:20] elf_xen_parsnote: HV_START_L = 0xffff8000000000
(XEN) [20117-23 18:11:20] e_xen_parse_note:ADDR_OFFSET = 0x
(XEN) [2011-07- 18:11:20] elf_x_addr_calc_checkaddresses:
(XEN[2011-07-23 18:120] virt_base = 0xffffff80000000
(X) [2011-07-23 181:20] elf_par_offset = 0x0
EN) [2011-07-23 :11:20] virtffset = 0xffffff80000000
(N) [2011-07-23 111:20] virt_tart = 0xffffff81000000
(XEN) [2011-07-238:11:20] virkend = 0xffffff81e14000
EN) [2011-07-23 :11:20] virtntry = 0xffffff81b1e200
(N) [2011-07-23 18:11:20] p2m_base = 0xffffffffffffffff
(XEN) [2011-07-23 18:11:20] Xen kernel: 64-bit, lsb, compat32
(XEN) [2011-07-23 18:11:20] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e14000
(XEN) [2011-07-23 18:11:20] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2011-07-23 18:11:20] Dom0 alloc.: 0000000244000000->0000000248000000 (177715 pages to be allocated)
(XEN) [2011-07-23 18:11:20] Init. ramdisk: 000000024f633000->000000024ffffa00
(XEN) [2011-07-23 18:11:20] VIRTUAL MEMORY ARRANGEMENT:
(XEN) [2011-07-23 18:11:20] Loaded kernel: ffffffff81000000->ffffffff81e14000
(XEN) [2011-07-23 18:11:20] Init. ramdisk: ffffffff81e14000->ffffffff827e0a00
(XEN) [2011-07-23 18:11:20] Phys-Mach map: ffffffff827e1000->ffffffff82961000
(XEN) [2011-07-23 18:11:20] Start info: ffffffff82961000->ffffffff829614b4
(XEN) [2011-07-23 18:11:20] Page tables: ffffffff82962000->ffffffff8297b000
(XEN) [2011-07-23 18:11:20] Boot stack: ffffffff8297b000->ffffffff8297c000
(XEN) [2011-07-23 18:11:20] TOTAL: ffffffff80000000->ffffffff82c00000
(XEN) [2011-07-23 18:11:20] ENTRY ADDRESS: ffffffff81b1e200
(XEN) [2011-07-23 18:11:20] Dom0 has maximum 6 VCPUs
(XEN) [2011-07-23 18:11:20] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81a49000
(XEN) [2011-07-23 18:11:20] elf_load_binary: phdr 1 at 0xffffffff81a49000 -> 0xffffffff81b092c0
(XEN) [2011-07-23 18:11:20] elf_load_binary: phdr 2 at 0xffffffff81b0a000 -> 0xffffffff81b0ad60
(XEN) [2011-07-23 18:11:20] elf_load_binary: phdr 3 at 0xffffffff81b0b000 -> 0xffffffff81b1dac0
(XEN) [2011-07-23 18:11:20] elf_load_binary: phdr 4 at 0xffffffff81b1e000 -> 0xffffffff81be8000
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0000, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0002, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0010, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0018, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0028, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0030, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:20] AMD-Vi: Setup I/O page table: device id = 0x0050, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0058, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0068, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0088, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0090, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0092, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0098, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x009a, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a0, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a1, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a3, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a4, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a5, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00a8, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00b0, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x00b2, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: No iommu for device 00:18.0
(XEN) [2011-07-23 18:11:21] AMD-Vi: No iommu for device 00:18.1
(XEN) [2011-07-23 18:11:21] AMD-Vi: No iommu for device 00:18.2
(XEN) [2011-07-23 18:11:21] AMD-Vi: No iommu for device 00:18.3
(XEN) [2011-07-23 18:11:21] AMD-Vi: No iommu for device 00:18.4
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0400, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0401, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0402, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0403, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0404, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0405, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0406, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0407, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0500, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0501, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0600, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0700, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0800, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0900, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a00, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a01, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a02, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a03, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a04, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a05, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a06, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0a07, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] AMD-Vi: Setup I/O page table: device id = 0x0b00, root table = 0x248195000, domain = 0, pagi
ng mode = 3
(XEN) [2011-07-23 18:11:21] Scrubbing Free RAM: ........................................................................
.done.
(XEN) [2011-07-23 18:11:23] Xen trace buffers: disabled
(XEN) [2011-07-23 18:11:23] Std. Loglevel: All
(XEN) [2011-07-23 18:11:23] Guest Loglevel: All
(XEN) [2011-07-23 18:11:23] Xen is relinquishing VGA console.
(XEN) [2011-07-23 18:11:23] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2011-07-23 18:11:23] Freed 216kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Linux version 3.0.0-xen-3.1-konrad-master-20110722+ (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.
5-8) ) #1 SMP Fri Jul 22 23:33:53 CEST 2011
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty console=vga nomodeset vga=
794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.passthrough=passth
rough xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.
1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resource_align
ment=07:01.0;07:01.1;07:01.2
[ 0.000000] released 0 pages of unused memory
[ 0.000000] Set 327889 page(s) to 1-1 mapping.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 0000000030000000 - 00000000aff90000 (unusable)
[ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data)
[ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS)
[ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000
[ 0.000000] RAMDISK: 01e14000 - 027e1000
[ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aff9e000 00040
[ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x002b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] 0: 0x00100000 -> 0x002b0000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 24-279
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88002f026000 s76480 r8192 d21824 u106496
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1927437
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty console=vga nomodes
et vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.passthrough
=passthrough xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)
(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resourc
e_alignment=07:01.0;07:01.1;07:01.2
[ 0.000000] Booting kernel: `passthrough' invalid for parameter `xen-pciback.passthrough'
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8800237f7000 - ffff8800277f7000
[ 0.000000] software IO TLB at phys 0x237f7000 - 0x277f7000
[ 0.000000] Memory: 559004k/11272192k available (7594k kernel code, 3408324k absent, 7304864k reserved, 3706k data, 8
60k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:1536 16
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
(XEN) [2011-07-23 18:11:23] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> IRQ 9 Mode:1 Active:1)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Linux version 3.0.0-xen-3.1-konrad-master-20110722+ (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.
5-8) ) #1 SMP Fri Jul 22 23:33:53 CEST 2011
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty console=vga nomodeset vga=
794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.passthrough=passth
rough xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.
1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resource_align
ment=07:01.0;07:01.1;07:01.2
[ 0.000000] released 0 pages of unused memory
[ 0.000000] Set 327889 page(s) to 1-1 mapping.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 0000000030000000 - 00000000aff90000 (unusable)
[ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data)
[ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS)
[ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000
[ 0.000000] RAMDISK: 01e14000 - 027e1000
[ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aff9e000 00040
[ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x002b0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] 0: 0x00100000 -> 0x002b0000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI 0-255
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI 24-279
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.1.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88002f026000 s76480 r8192 d21824 u106496
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1927437
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty console=vga nomodes
et vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.passthrough
=passthrough xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)
(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resourc
e_alignment=07:01.0;07:01.1;07:01.2
[ 0.000000] Booting kernel: `passthrough' invalid for parameter `xen-pciback.passthrough'
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Placing 64MB software IO TLB between ffff8800237f7000 - ffff8800277f7000
[ 0.000000] software IO TLB at phys 0x237f7000 - 0x277f7000
[ 0.000000] Memory: 559004k/11272192k available (7594k kernel code, 3408324k absent, 7304864k reserved, 3706k data, 8
60k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:1536 16
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 3200.204 MHz processor.
[ 0.000000] Detected 3200.204 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. [ 0.004000] Calibrating del
ay loop (skipped), value calculated using timer frequency.. 6400.40 BogoMIPS (lpj=12800816)
6400.40 BogoMIPS (lpj=12800816)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Initializing.
[ 0.004000] SELinux: Initializing.
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] ACPI: Core revision 20110413
[ 0.004000] ACPI: Core revision 20110413
[ 0.014139] ftrace: allocating 25610 entries in 101 pages
[ 0.014139] ftrace: allocating 25610 entries in 101 pages
[ 0.016101] cpu 0 spinlock event irq 297
[ 0.016101] cpu 0 spinlock event irq 297
[ 0.016173] Performance Events: [ 0.016173] Performance Events: (XEN) [2011-07-23 18:11:23] traps.c:2388:d0 Domain
attempted WRMSR 00000000c0010004 from 0x0000eff2bffb1f1c to 0x000000000000abcd.
Broken PMU hardware detected, using software events only.
Broken PMU hardware detected, using software events only.
[ 0.016403] MCE: In-kernel MCE decoding enabled.
[ 0.016403] MCE: In-kernel MCE decoding enabled.
[ 0.016524] installing Xen timer for CPU 1
[ 0.016524] installing Xen timer for CPU 1
[ 0.016541] cpu 1 spinlock event irq 303
[ 0.016541] cpu 1 spinlock event irq 303
[ 0.016794] installing Xen timer for CPU 2
[ 0.016794] installing Xen timer for CPU 2
[ 0.016815] cpu 2 spinlock event irq 309
[ 0.016815] cpu 2 spinlock event irq 309
[ 0.017066] installing Xen timer for CPU 3
[ 0.017066] installing Xen timer for CPU 3
[ 0.017081] cpu 3 spinlock event irq 315
[ 0.017081] cpu 3 spinlock event irq 315
[ 0.017317] installing Xen timer for CPU 4
[ 0.017317] installing Xen timer for CPU 4
[ 0.017333] cpu 4 spinlock event irq 321
[ 0.017333] cpu 4 spinlock event irq 321
[ 0.017572] installing Xen timer for CPU 5
[ 0.017572] installing Xen timer for CPU 5
[ 0.017588] cpu 5 spinlock event irq 327
[ 0.017588] cpu 5 spinlock event irq 327
[ 0.017701] Brought up 6 CPUs
[ 0.017701] Brought up 6 CPUs
[ 0.017795] Grant table initialized
[ 0.017795] Grant table initialized
[ 0.017795] NET: Registered protocol family 16
[ 0.017795] NET: Registered protocol family 16
[ 0.020044] TOM: 00000000b0000000 aka 2816M
[ 0.020044] TOM: 00000000b0000000 aka 2816M
[ 0.020060] TOM2: 0000000250000000 aka 9472M
[ 0.020060] TOM2: 0000000250000000 aka 9472M
[ 0.020096] Extended Config Space enabled on 1 nodes
[ 0.020096] Extended Config Space enabled on 1 nodes
[ 0.020275] ACPI: bus type pci registered
[ 0.020275] ACPI: bus type pci registered
[ 0.020312] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.020312] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.020312] PCI: not using MMCONFIG
[ 0.020312] PCI: not using MMCONFIG
[ 0.020312] PCI: Using configuration type 1 for base access
[ 0.020312] PCI: Using configuration type 1 for base access
[ 0.020312] PCI: Using configuration type 1 for extended access
[ 0.020312] PCI: Using configuration type 1 for extended access
[ 0.040142] bio: create slab <bio-0> at 0
[ 0.040142] bio: create slab <bio-0> at 0
[ 0.048229] ACPI: [ 0.048229] ACPI: Executed 3 blocks of module-level executable AML codeExecuted 3 blocks of modu
le-level executable AML code
[ 0.064863] ACPI: Interpreter enabled
[ 0.064863] ACPI: Interpreter enabled
[ 0.064870] ACPI: (supports S0[ 0.064870] ACPI: (supports S0 S5 S5)
)
[ 0.064888] ACPI: Using IOAPIC for interrupt routing
[ 0.064888] ACPI: Using IOAPIC for interrupt routing
[ 0.064940] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064940] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.067589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.067589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.244468] ACPI: No dock devices found.
[ 0.244468] ACPI: No dock devices found.
[ 0.244477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244477] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.244815] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244815] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.244897] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.244897] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.244897] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xdfffffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xdfffffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.244897] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.245803] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.245803] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.256138] pci 0000:00:02.0: PCI bridge to [bus 0b-0b]
[ 0.256138] pci 0000:00:02.0: PCI bridge to [bus 0b-0b]
[ 0.264165] pci 0000:00:03.0: PCI bridge to [bus 0a-0a]
[ 0.264165] pci 0000:00:03.0: PCI bridge to [bus 0a-0a]
[ 0.272053] pci 0000:00:05.0: PCI bridge to [bus 09-09]
[ 0.272053] pci 0000:00:05.0: PCI bridge to [bus 09-09]
[ 0.280055] pci 0000:00:06.0: PCI bridge to [bus 08-08]
[ 0.280055] pci 0000:00:06.0: PCI bridge to [bus 08-08]
[ 0.280359] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.280359] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.280380] pci 0000:00:0a.0: PCI bridge to [bus 06-07]
[ 0.280380] pci 0000:00:0a.0: PCI bridge to [bus 06-07]
[ 0.280688] pci 0000:07:01.0: Disabling memory decoding and releasing memory resources.
[ 0.280688] pci 0000:07:01.0: Disabling memory decoding and releasing memory resources.
[ 0.280928] pci 0000:07:01.1: Disabling memory decoding and releasing memory resources.
[ 0.280928] pci 0000:07:01.1: Disabling memory decoding and releasing memory resources.
[ 0.281167] pci 0000:07:01.2: Disabling memory decoding and releasing memory resources.
[ 0.281167] pci 0000:07:01.2: Disabling memory decoding and releasing memory resources.
[ 0.281180] pci 0000:07:01.2: Rounding up size of resource #0 to 0x1000.
[ 0.281180] pci 0000:07:01.2: Rounding up size of resource #0 to 0x1000.
[ 0.281357] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 0.281357] pci 0000:06:00.0: PCI bridge to [bus 07-07]
[ 0.288111] pci 0000:00:0b.0: PCI bridge to [bus 05-05]
[ 0.288111] pci 0000:00:0b.0: PCI bridge to [bus 05-05]
[ 0.296130] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.296130] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.296465] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.296465] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.296603] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 0.296603] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 0.297329] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.297329] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.297539] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.297539] pci0000:00: ACPI _OSC control (0x1d) granted
(XEN) [2011-07-23 18:11:24] PCI add device 00:00.0
([ 1.818035] Event-channel device installed.
[ 1.818035] Event-channel device installed.
[ 1.818553] xen-pciback: backend is vpci
[ 1.818553] xen-pciback: backend is vpci
[ 1.819720] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.819720] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.136663] Non-volatile memory driver v1.3
[ 2.136663] Non-volatile memory driver v1.3
[ 2.137229] Linux agpgart interface v0.103
[ 2.137229] Linux agpgart interface v0.103
[ 2.142345] brd: module loaded
[ 2.142345] brd: module loaded
[ 2.207581] loop: module loaded
[ 2.207581] loop: module loaded
(XEN) [2011-07-23 18:11:26] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x49 -> IRQ 19 Mode:1 Active:1)
[ 2.211433] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.211433] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.211913] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.211913] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.212119] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.212119] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.214266] scsi0 : ahci
[ 2.214266] scsi0 : ahci
[ 2.214635] scsi1 : ahci
[ 2.214635] scsi1 : ahci
[ 2.214956] scsi2 : ahci
[ 2.214956] scsi2 : ahci
[ 2.215295] scsi3 : ahci
[ 2.215295] scsi3 : ahci
[ 2.215747] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 irq 342
[ 2.215747] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 irq 342
[ 2.215965] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 irq 342
[ 2.215965] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 irq 342
[ 2.216155] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 irq 342
[ 2.216155] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 irq 342
[ 2.216341] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 irq 342
[ 2.216341] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 irq 342
[ 2.217671] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.217671] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.217844] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.217844] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.218156] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 2.218156] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 2.218330] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.218330] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.218790] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
[ 2.218790] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
[ 2.218956] Copyright (c) 2007-2011 Intel Corporation.
[ 2.218956] Copyright (c) 2007-2011 Intel Corporation.
[ 2.219236] Intel(R) Virtual Function Network Driver - version 1.0.8-k0
[ 2.219236] Intel(R) Virtual Function Network Driver - version 1.0.8-k0
[ 2.219399] Copyright (c) 2009 - 2010 Intel Corporation.
[ 2.219399] Copyright (c) 2009 - 2010 Intel Corporation.
[ 2.220520] tun: Universal TUN/TAP device driver, 1.6
[ 2.220520] tun: Universal TUN/TAP device driver, 1.6
[ 2.220647] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.220647] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.221040] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.221040] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-22 -> 0x59 -> IRQ 46 Mode:1 Active:1)
[ 2.226482] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
[ 2.226482] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
[ 2.232857] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc90000022000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 343
[ 2.232857] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc90000022000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 343
[ 2.238604] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.238604] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-27 -> 0x69 -> IRQ 51 Mode:1 Active:1)
[ 2.244336] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 2.244336] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 2.250579] r8169 0000:08:00.0: eth1: RTL8168d/8111d at 0xffffc90000024000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 344
[ 2.250579] r8169 0000:08:00.0: eth1: RTL8168d/8111d at 0xffffc90000024000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 344
[ 2.256683] console [netcon0] enabled
[ 2.256683] console [netcon0] enabled
[ 2.260670] netconsole: network logging started
[ 2.260670] netconsole: network logging started
[ 2.269298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.269298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
(XEN) [2011-07-23 18:11:26] IOAPIC[0]: Set PCI routing entry (6-17 -> 0x79 -> IRQ 17 Mode:1 Active:1)
[ 2.275659] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.275659] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.282089] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.282089] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.288654] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.288654] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.295279] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.295279] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.302101] ehci_hcd 0000:00:12.2: debug port 1
[ 2.302101] ehci_hcd 0000:00:12.2: debug port 1
[ 2.306000] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400
[ 2.306000] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400
[ 2.324199] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.324199] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.330687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.330687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.334648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.334648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.334648] usb usb1: Product: EHCI Host Controller
[ 2.334648] usb usb1: Product: EHCI Host Controller
[ 2.334648] usb usb1: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.334648] usb usb1: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.334648] usb usb1: SerialNumber: 0000:00:12.2
[ 2.334648] usb usb1: SerialNumber: 0000:00:12.2
[ 2.363335] hub 1-0:1.0: USB hub found
[ 2.363335] hub 1-0:1.0: USB hub found
[ 2.369831] hub 1-0:1.0: 5 ports detected
[ 2.369831] hub 1-0:1.0: 5 ports detected
[ 2.376464] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.376464] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.382813] Already setup the GSI :17
[ 2.382813] Already setup the GSI :17
[ 2.386801] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.386801] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.395486] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.395486] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.402021] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.402021] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.408282] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.408282] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.414656] ehci_hcd 0000:00:13.2: debug port 1
[ 2.414656] ehci_hcd 0000:00:13.2: debug port 1
[ 2.418611] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800
[ 2.418611] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800
[ 2.436172] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.436172] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.442326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.442326] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.446291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.446291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.446291] usb usb2: Product: EHCI Host Controller
[ 2.446291] usb usb2: Product: EHCI Host Controller
[ 2.446291] usb usb2: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.446291] usb usb2: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.446291] usb usb2: SerialNumber: 0000:00:13.2
[ 2.446291] usb usb2: SerialNumber: 0000:00:13.2
[ 2.473685] hub 2-0:1.0: USB hub found
[ 2.473685] hub 2-0:1.0: USB hub found
[ 2.479977] hub 2-0:1.0: 5 ports detected
[ 2.479977] hub 2-0:1.0: 5 ports detected
[ 2.486335] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.486335] xen_map_pirq_gsi: returning irq 17 for gsi 17
[ 2.492474] Already setup the GSI :17
[ 2.492474] Already setup the GSI :17
[ 2.496464] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.496464] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.504833] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.504833] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.511417] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.511417] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.517886] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.517886] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.524437] ehci_hcd 0000:00:16.2: debug port 1
[ 2.524437] ehci_hcd 0000:00:16.2: debug port 1
[ 2.528393] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00
[ 2.528393] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00
[ 2.536178] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.536178] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.536246] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.536246] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.560202] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.560202] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.566777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.566777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.570713] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.570713] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.570713] usb usb3: Product: EHCI Host Controller
[ 2.570713] usb usb3: Product: EHCI Host Controller
[ 2.570713] usb usb3: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.570713] usb usb3: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.570713] usb usb3: SerialNumber: 0000:00:16.2
[ 2.570713] usb usb3: SerialNumber: 0000:00:16.2
[ 2.599890] hub 3-0:1.0: USB hub found
[ 2.599890] hub 3-0:1.0: USB hub found
[ 2.606333] hub 3-0:1.0: 4 ports detected
[ 2.606333] hub 3-0:1.0: 4 ports detected
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-4 -> 0x81 -> IRQ 28 Mode:1 Active:1)
[ 2.612934] ehci_hcd 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 2.612934] ehci_hcd 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 2.619452] ehci_hcd 0000:0a:00.1: EHCI Host Controller
[ 2.619452] ehci_hcd 0000:0a:00.1: EHCI Host Controller
[ 2.626127] ehci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 4
[ 2.626127] ehci_hcd 0000:0a:00.1: new USB bus registered, assigned bus number 4
[ 2.656252] ehci_hcd 0000:0a:00.1: irq 28, io mem 0xf9ff9000
[ 2.656252] ehci_hcd 0000:0a:00.1: irq 28, io mem 0xf9ff9000
[ 2.672191] ehci_hcd 0000:0a:00.1: USB 2.0 started, EHCI 1.00
[ 2.672191] ehci_hcd 0000:0a:00.1: USB 2.0 started, EHCI 1.00
[ 2.678413] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.678413] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.682383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.682383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.682383] usb usb4: Product: EHCI Host Controller
[ 2.682383] usb usb4: Product: EHCI Host Controller
[ 2.682383] usb usb4: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.682383] usb usb4: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.682383] usb usb4: SerialNumber: 0000:0a:00.1
[ 2.682383] usb usb4: SerialNumber: 0000:0a:00.1
[ 2.708148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.708148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.708182] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.708182] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.721324] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7
[ 2.721324] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7
[ 2.725288] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.725288] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.733663] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 2.733663] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-5 -> 0x89 -> IRQ 29 Mode:1 Active:1)
[ 2.733838] hub 4-0:1.0: USB hub found
[ 2.733838] hub 4-0:1.0: USB hub found
[ 2.733856] hub 4-0:1.0: 1 port detected
[ 2.733856] hub 4-0:1.0: 1 port detected
[ 2.734068] ehci_hcd 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 2.734068] ehci_hcd 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 2.734095] ehci_hcd 0000:0a:00.3: EHCI Host Controller
[ 2.734095] ehci_hcd 0000:0a:00.3: EHCI Host Controller
[ 2.734489] ehci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
[ 2.734489] ehci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-6 -> 0x91 -> IRQ 30 Mode:1 Active:1)
[ 2.756195] ehci_hcd 0000:0a:00.3: irq 29, io mem 0xf9ffb000
[ 2.756195] ehci_hcd 0000:0a:00.3: irq 29, io mem 0xf9ffb000
[ 2.768131] ehci_hcd 0000:0a:00.3: USB 2.0 started, EHCI 1.00
[ 2.768131] ehci_hcd 0000:0a:00.3: USB 2.0 started, EHCI 1.00
[ 2.768163] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.768163] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.768165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.768165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.768167] usb usb5: Product: EHCI Host Controller
[ 2.768167] usb usb5: Product: EHCI Host Controller
[ 2.768169] usb usb5: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.768169] usb usb5: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-7 -> 0x99 -> IRQ 31 Mode:1 Active:1)
[ 2.768172] usb usb5: SerialNumber: 0000:0a:00.3
[ 2.768172] usb usb5: SerialNumber: 0000:0a:00.3
[ 2.768478] hub 5-0:1.0: USB hub found
[ 2.768478] hub 5-0:1.0: USB hub found
[ 2.768484] hub 5-0:1.0: 1 port detected
[ 2.768484] hub 5-0:1.0: 1 port detected
[ 2.768664] ehci_hcd 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30
[ 2.768664] ehci_hcd 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30
[ 2.768693] ehci_hcd 0000:0a:00.5: EHCI Host Controller
[ 2.768693] ehci_hcd 0000:0a:00.5: EHCI Host Controller
[ 2.768983] ehci_hcd 0000:0a:00.5: new USB bus registered, assigned bus number 6
[ 2.768983] ehci_hcd 0000:0a:00.5: new USB bus registered, assigned bus number 6
[ 2.792196] ehci_hcd 0000:0a:00.5: irq 30, io mem 0xf9ffd000
[ 2.792196] ehci_hcd 0000:0a:00.5: irq 30, io mem 0xf9ffd000
[ 2.804141] ehci_hcd 0000:0a:00.5: USB 2.0 started, EHCI 1.00
[ 2.804141] ehci_hcd 0000:0a:00.5: USB 2.0 started, EHCI 1.00
[ 2.804170] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.804170] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.804172] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.804172] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.804174] usb usb6: Product: EHCI Host Controller
[ 2.804174] usb usb6: Product: EHCI Host Controller
[ 2.804176] usb usb6: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.804176] usb usb6: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-16 -> 0xa1 -> IRQ 40 Mode:1 Active:1)
[ 2.804178] usb usb6: SerialNumber: 0000:0a:00.5
[ 2.804178] usb usb6: SerialNumber: 0000:0a:00.5
[ 2.804459] hub 6-0:1.0: USB hub found
[ 2.804459] hub 6-0:1.0: USB hub found
[ 2.804465] hub 6-0:1.0: 1 port detected
[ 2.804465] hub 6-0:1.0: 1 port detected
[ 2.804643] ehci_hcd 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31
[ 2.804643] ehci_hcd 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31
[ 2.804671] ehci_hcd 0000:0a:00.7: EHCI Host Controller
[ 2.804671] ehci_hcd 0000:0a:00.7: EHCI Host Controller
[ 2.804970] ehci_hcd 0000:0a:00.7: new USB bus registered, assigned bus number 7
[ 2.804970] ehci_hcd 0000:0a:00.7: new USB bus registered, assigned bus number 7
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-17 -> 0xa9 -> IRQ 41 Mode:1 Active:1)
[ 2.828185] ehci_hcd 0000:0a:00.7: irq 31, io mem 0xf9fff000
[ 2.828185] ehci_hcd 0000:0a:00.7: irq 31, io mem 0xf9fff000
[ 2.840130] ehci_hcd 0000:0a:00.7: USB 2.0 started, EHCI 1.00
[ 2.840130] ehci_hcd 0000:0a:00.7: USB 2.0 started, EHCI 1.00
[ 2.840162] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.840162] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.840164] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840164] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840166] usb usb7: Product: EHCI Host Controller
[ 2.840166] usb usb7: Product: EHCI Host Controller
[ 2.840168] usb usb7: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.840168] usb usb7: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-18 -> 0xb1 -> IRQ 42 Mode:1 Active:1)
[ 2.840170] usb usb7: SerialNumber: 0000:0a:00.7
[ 2.840170] usb usb7: SerialNumber: 0000:0a:00.7
[ 2.840458] hub 7-0:1.0: USB hub found
[ 2.840458] hub 7-0:1.0: USB hub found
[ 2.840465] hub 7-0:1.0: 1 port detected
[ 2.840465] hub 7-0:1.0: 1 port detected
[ 2.840598] ehci_hcd 0000:07:01.2: enabling device (0114 -> 0116)
[ 2.840598] ehci_hcd 0000:07:01.2: enabling device (0114 -> 0116)
[ 2.840612] xen_map_pirq_gsi: returning irq 46 for gsi 46
[ 2.840612] xen_map_pirq_gsi: returning irq 46 for gsi 46
[ 2.840616] Already setup the GSI :46
[ 2.840616] Already setup the GSI :46
(XEN) [2011-07-23 18:11:26] IOAPIC[1]: Set PCI routing entry (7-19 -> 0xb9 -> IRQ 43 Mode:1 Active:1)
[ 2.840618] ehci_hcd 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46
[ 2.840618] ehci_hcd 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46
[ 2.840638] ehci_hcd 0000:07:01.2: EHCI Host Controller
[ 2.840638] ehci_hcd 0000:07:01.2: EHCI Host Controller
[ 2.840915] ehci_hcd 0000:07:01.2: new USB bus registered, assigned bus number 8
[ 2.840915] ehci_hcd 0000:07:01.2: new USB bus registered, assigned bus number 8
[ 2.864180] ehci_hcd 0000:07:01.2: irq 46, io mem 0xf9c02000
[ 2.864180] ehci_hcd 0000:07:01.2: irq 46, io mem 0xf9c02000
[ 2.876131] ehci_hcd 0000:07:01.2: USB 2.0 started, EHCI 1.00
[ 2.876131] ehci_hcd 0000:07:01.2: USB 2.0 started, EHCI 1.00
[ 2.876162] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.876162] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
(XEN) [2011-07-23 18:11:26] IOAPIC[0]: Set PCI routing entry (6-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
[ 2.876165] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.876165] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.876167] usb usb8: Product: EHCI Host Controller
[ 2.876167] usb usb8: Product: EHCI Host Controller
[ 2.876169] usb usb8: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.876169] usb usb8: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.876171] usb usb8: SerialNumber: 0000:07:01.2
[ 2.876171] usb usb8: SerialNumber: 0000:07:01.2
[ 2.876456] hub 8-0:1.0: USB hub found
[ 2.876456] hub 8-0:1.0: USB hub found
[ 2.876462] hub 8-0:1.0: 5 ports detected
[ 2.876462] hub 8-0:1.0: 5 ports detected
[ 2.876664] ehci_hcd 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 2.876664] ehci_hcd 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 2.876698] ehci_hcd 0000:04:00.1: EHCI Host Controller
[ 2.876698] ehci_hcd 0000:04:00.1: EHCI Host Controller
[ 2.877043] ehci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 9
[ 2.877043] ehci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 9
[ 2.900186] ehci_hcd 0000:04:00.1: irq 40, io mem 0xf9af9000
[ 2.900186] ehci_hcd 0000:04:00.1: irq 40, io mem 0xf9af9000
[ 2.912140] ehci_hcd 0000:04:00.1: USB 2.0 started, EHCI 1.00
[ 2.912140] ehci_hcd 0000:04:00.1: USB 2.0 started, EHCI 1.00
[ 2.912169] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.912169] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.912171] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.912171] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.912173] usb usb9: Product: EHCI Host Controller
[ 2.912173] usb usb9: Product: EHCI Host Controller
[ 2.912175] usb usb9: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.912175] usb usb9: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ehci_hcd
[ 2.912177] usb usb9: SerialNumber: 0000:04:00.1
[ 2.912177] usb usb9: SerialNumber: 0000:04:00.1
[ 2.912461] hub 9-0:1.0: USB hub found
[ 2.912461] hub 9-0:1.0: USB hub found
[ 2.912467] hub 9-0:1.0: 1 port detected
[ 2.912467] hub 9-0:1.0: 1 port detected
[ 2.912657] ehci_hcd 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41
[ 2.912657] ehci_hcd 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41
[ 2.912684] ehci_hcd 0000:04:00.3: EHCI Host Controller
[ 2.912684] ehci_hcd 0000:04:00.3: EHCI Host Contr[ 3.440139] usb usb19: New USB device found, idVendor=1d6b, idPr
oduct=0001
[ 3.440139] usb usb19: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.440142] usb usb19: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.440142] usb usb19: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.440145] usb usb19: Product: OHCI Host Controller
[ 3.440145] usb usb19: Product: OHCI Host Controller
[ 3.440148] usb usb19: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.440148] usb usb19: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.440150] usb usb19: SerialNumber: 0000:0a:00.4
[ 3.440150] usb usb19: SerialNumber: 0000:0a:00.4
[ 3.440448] hub 19-0:1.0: USB hub found
[ 3.440448] hub 19-0:1.0: USB hub found
[ 3.440458] hub 19-0:1.0: 1 port detected
[ 3.440458] hub 19-0:1.0: 1 port detected
[ 3.440611] xen_map_pirq_gsi: returning irq 31 for gsi 31
[ 3.440611] xen_map_pirq_gsi: returning irq 31 for gsi 31
[ 3.440615] Already setup the GSI :31
[ 3.440615] Already setup the GSI :31
[ 3.440618] ohci_hcd 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31
[ 3.440618] ohci_hcd 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31
[ 3.440645] ohci_hcd 0000:0a:00.6: OHCI Host Controller
[ 3.440645] ohci_hcd 0000:0a:00.6: OHCI Host Controller
[ 3.440919] ohci_hcd 0000:0a:00.6: new USB bus registered, assigned bus number 20
[ 3.440919] ohci_hcd 0000:0a:00.6: new USB bus registered, assigned bus number 20
[ 3.440970] ohci_hcd 0000:0a:00.6: irq 31, io mem 0xf9ffe000
[ 3.440970] ohci_hcd 0000:0a:00.6: irq 31, io mem 0xf9ffe000
[ 3.500161] usb usb20: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.500161] usb usb20: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.500164] usb usb20: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.500164] usb usb20: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.500166] usb usb20: Product: OHCI Host Controller
[ 3.500166] usb usb20: Product: OHCI Host Controller
[ 3.500168] usb usb20: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.500168] usb usb20: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.500170] usb usb20: SerialNumber: 0000:0a:00.6
[ 3.500170] usb usb20: SerialNumber: 0000:0a:00.6
[ 3.500480] hub 20-0:1.0: USB hub found
[ 3.500480] hub 20-0:1.0: USB hub found
[ 3.500490] hub 20-0:1.0: 1 port detected
[ 3.500490] hub 20-0:1.0: 1 port detected
[ 3.500639] ohci_hcd 0000:07:01.0: enabling device (0114 -> 0116)
[ 3.500639] ohci_hcd 0000:07:01.0: enabling device (0114 -> 0116)
[ 3.500685] ohci_hcd 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 3.500685] ohci_hcd 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 3.500716] ohci_hcd 0000:07:01.0: OHCI Host Controller
[ 3.500716] ohci_hcd 0000:07:01.0: OHCI Host Controller
[ 3.501018] ohci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 21
[ 3.501018] ohci_hcd 0000:07:01.0: new USB bus registered, assigned bus number 21
[ 3.501116] ohci_hcd 0000:07:01.0: irq 44, io mem 0xf9c00000
[ 3.501116] ohci_hcd 0000:07:01.0: irq 44, io mem 0xf9c00000
[ 3.585930] usb usb21: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.585930] usb usb21: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.585932] usb usb21: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.585932] usb usb21: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.585934] usb usb21: Product: OHCI Host Controller
[ 3.585934] usb usb21: Product: OHCI Host Controller
[ 3.585936] usb usb21: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.585936] usb usb21: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.585938] usb usb21: SerialNumber: 0000:07:01.0
[ 3.585938] usb usb21: SerialNumber: 0000:07:01.0
[ 3.586354] hub 21-0:1.0: USB hub found
[ 3.586354] hub 21-0:1.0: USB hub found
[ 3.586363] hub 21-0:1.0: 3 ports detected
[ 3.586363] hub 21-0:1.0: 3 ports detected
[ 3.586529] ohci_hcd 0000:07:01.1: enabling device (0114 -> 0116)
[ 3.586529] ohci_hcd 0000:07:01.1: enabling device (0114 -> 0116)
[ 3.586576] ohci_hcd 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
[ 3.586576] ohci_hcd 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45
[ 3.586599] ohci_hcd 0000:07:01.1: OHCI Host Controller
[ 3.586599] ohci_hcd 0000:07:01.1: OHCI Host Controller
[ 3.586906] ohci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 22
[ 3.586906] ohci_hcd 0000:07:01.1: new USB bus registered, assigned bus number 22
[ 3.586991] ohci_hcd 0000:07:01.1: irq 45, io mem 0xf9c01000
[ 3.586991] ohci_hcd 0000:07:01.1: irq 45, io mem 0xf9c01000
[ 3.669853] usb usb22: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.669853] usb usb22: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.669856] usb usb22: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.669856] usb usb22: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.669858] usb usb22: Product: OHCI Host Controller
[ 3.669858] usb usb22: Product: OHCI Host Controller
[ 3.669860] usb usb22: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.669860] usb usb22: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.669861] usb usb22: SerialNumber: 0000:07:01.1
[ 3.669861] usb usb22: SerialNumber: 0000:07:01.1
[ 3.670299] hub 22-0:1.0: USB hub found
[ 3.670299] hub 22-0:1.0: USB hub found
[ 3.670315] hub 22-0:1.0: 2 ports detected
[ 3.670315] hub 22-0:1.0: 2 ports detected
[ 3.670465] xen_map_pirq_gsi: returning irq 40 for gsi 40
[ 3.670465] xen_map_pirq_gsi: returning irq 40 for gsi 40
[ 3.670469] Already setup the GSI :40
[ 3.670469] Already setup the GSI :40
[ 3.670472] ohci_hcd 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 3.670472] ohci_hcd 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
[ 3.670497] ohci_hcd 0000:04:00.0: OHCI Host Controller
[ 3.670497] ohci_hcd 0000:04:00.0: OHCI Host Controller
[ 3.670804] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 23
[ 3.670804] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 23
[ 3.670854] ohci_hcd 0000:04:00.0: irq 40, io mem 0xf9af8000
[ 3.670854] ohci_hcd 0000:04:00.0: irq 40, io mem 0xf9af8000
[ 3.728145] usb usb23: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.728145] usb usb23: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.728149] usb usb23: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.728149] usb usb23: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.728151] usb usb23: Product: OHCI Host Controller
[ 3.728151] usb usb23: Product: OHCI Host Controller
[ 3.728153] usb usb23: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.728153] usb usb23: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.728155] usb usb23: SerialNumber: 0000:04:00.0
[ 3.728155] usb usb23: SerialNumber: 0000:04:00.0
[ 3.728460] hub 23-0:1.0: USB hub found
[ 3.728460] hub 23-0:1.0: USB hub found
[ 3.728470] hub 23-0:1.0: 1 port detected
[ 3.728470] hub 23-0:1.0: 1 port detected
[ 3.728621] xen_map_pirq_gsi: returning irq 41 for gsi 41
[ 3.728621] xen_map_pirq_gsi: returning irq 41 for gsi 41
[ 3.728625] Already setup the GSI :41
[ 3.728625] Already setup the GSI :41
[ 3.728628] ohci_hcd 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41
[ 3.728628] ohci_hcd 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41
[ 3.728654] ohci_hcd 0000:04:00.2: OHCI Host Controller
[ 3.728654] ohci_hcd 0000:04:00.2: OHCI Host Controller
[ 3.728927] ohci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 24
[ 3.728927] ohci_hcd 0000:04:00.2: new USB bus registered, assigned bus number 24
[ 3.728977] ohci_hcd 0000:04:00.2: irq 41, io mem 0xf9afa000
[ 3.728977] ohci_hcd 0000:04:00.2: irq 41, io mem 0xf9afa000
[ 3.788152] usb usb24: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.788152] usb usb24: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.788155] usb usb24: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.788155] usb usb24: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.788157] usb usb24: Product: OHCI Host Controller
[ 3.788157] usb usb24: Product: OHCI Host Controller
[ 3.788159] usb usb24: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.788159] usb usb24: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.788161] usb usb24: SerialNumber: 0000:04:00.2
[ 3.788161] usb usb24: SerialNumber: 0000:04:00.2
[ 3.788461] hub 24-0:1.0: USB hub found
[ 3.788461] hub 24-0:1.0: USB hub found
[ 3.788470] hub 24-0:1.0: 1 port detected
[ 3.788470] hub 24-0:1.0: 1 port detected
[ 3.788624] xen_map_pirq_gsi: returning irq 42 for gsi 42
[ 3.788624] xen_map_pirq_gsi: returning irq 42 for gsi 42
[ 3.788628] Already setup the GSI :42
[ 3.788628] Already setup the GSI :42
[ 3.788631] ohci_hcd 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42
[ 3.788631] ohci_hcd 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42
[ 3.788670] ohci_hcd 0000:04:00.4: OHCI Host Controller
[ 3.788670] ohci_hcd 0000:04:00.4: OHCI Host Controller
[ 3.788979] ohci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 25
[ 3.788979] ohci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 25
[ 3.789026] ohci_hcd 0000:04:00.4: irq 42, io mem 0xf9afc000
[ 3.789026] ohci_hcd 0000:04:00.4: irq 42, io mem 0xf9afc000
[ 3.848148] usb usb25: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.848148] usb usb25: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.848151] usb usb25: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.848151] usb usb25: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.848154] usb usb25: Product: OHCI Host Controller
[ 3.848154] usb usb25: Product: OHCI Host Controller
[ 3.848156] usb usb25: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.848156] usb usb25: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.848158] usb usb25: SerialNumber: 0000:04:00.4
[ 3.848158] usb usb25: SerialNumber: 0000:04:00.4
[ 3.848484] hub 25-0:1.0: USB hub found
[ 3.848484] hub 25-0:1.0: USB hub found
[ 3.848494] hub 25-0:1.0: 1 port detected
[ 3.848494] hub 25-0:1.0: 1 port detected
[ 3.848640] xen_map_pirq_gsi: returning irq 43 for gsi 43
[ 3.848640] xen_map_pirq_gsi: returning irq 43 for gsi 43
[ 3.848644] Already setup the GSI :43
[ 3.848644] Already setup the GSI :43
[ 3.848646] ohci_hcd 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43
[ 3.848646] ohci_hcd 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43
[ 3.848673] ohci_hcd 0000:04:00.6: OHCI Host Controller
[ 3.848673] ohci_hcd 0000:04:00.6: OHCI Host Controller
[ 3.848973] ohci_hcd 0000:04:00.6: new USB bus registered, assigned bus number 26
[ 3.848973] ohci_hcd 0000:04:00.6: new USB bus registered, assigned bus number 26
[ 3.849028] ohci_hcd 0000:04:00.6: irq 43, io mem 0xf9afe000
[ 3.849028] ohci_hcd 0000:04:00.6: irq 43, io mem 0xf9afe000
[ 3.908151] usb usb26: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.908151] usb usb26: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.908154] usb usb26: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.908154] usb usb26: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.908156] usb usb26: Product: OHCI Host Controller
[ 3.908156] usb usb26: Product: OHCI Host Controller
[ 3.908158] usb usb26: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.908158] usb usb26: Manufacturer: Linux 3.0.0-xen-3.1-konrad-master-20110722+ ohci_hcd
[ 3.908160] usb usb26: SerialNumber: 0000:04:00.6
[ 3.908160] usb usb26: SerialNumber: 0000:04:00.6
[ 3.908461] hub 26-0:1.0: USB hub found
[ 3.908461] hub 26-0:1.0: USB hub found
[ 3.908470] hub 26-0:1.0: 1 port detected
[ 3.908470] hub 26-0:1.0: 1 port detected
[ 3.908845] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.908845] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.909244] usbcore: registered new interface driver usblp
[ 3.909244] usbcore: registered new interface driver usblp
[ 3.909246] Initializing USB Mass Storage driver...
[ 3.909246] Initializing USB Mass Storage driver...
[ 3.909404] usbcore: registered new interface driver usb-storage
[ 3.909404] usbcore: registered new interface driver usb-storage
[ 3.909406] USB Mass Storage support registered.
[ 3.909406] USB Mass Storage support registered.
[ 3.909582] usbcore: registered new interface driver libusual
[ 3.909582] usbcore: registered new interface driver libusual
[ 3.909800] usbcore: registered new interface driver usbserial
[ 3.909800] usbcore: registered new interface driver usbserial
[ 3.909802] usbserial: USB Serial Driver core
[ 3.909802] usbserial: USB Serial Driver core
[ 3.909910] USB Serial support registered for pl2303
[ 3.909910] USB Serial support registered for pl2303
[ 3.910048] usbcore: registered new interface driver pl2303
[ 3.910048] usbcore: registered new interface driver pl2303
[ 3.910050] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 3.910050] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 3.910416] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.910416] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.160289] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.160289] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.160694] mousedev: PS/2 mouse device common for all mice
[ 4.160694] mousedev: PS/2 mouse device common for all mice
[ 2.780108] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.780108] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.528166] ata3.00: configured for UDMA/133
[ 4.528166] ata3.00: configured for UDMA/133
[ 4.528486] rtc_cmos 00:04: RTC can wake from S4
[ 4.528486] rtc_cmos 00:04: RTC can wake from S4
[ 4.528998] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.528998] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.529061] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 4.529061] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 4.529687] lirc_dev: IR Remote Control driver registered, major 251
[ 4.529687] lirc_dev: IR Remote Control driver registered, major 251
[ 4.529691] IR NEC protocol handler initialized
[ 4.529691] IR NEC protocol handler initialized
[ 4.529693] IR RC5(x) protocol handler initialized
[ 4.529693] IR RC5(x) protocol handler initialized
[ 4.529695] IR RC6 protocol handler initialized
[ 4.529695] IR RC6 protocol handler initialized
[ 4.529698] IR JVC protocol handler initialized
[ 4.529698] IR JVC protocol handler initialized
[ 4.529699] IR Sony protocol handler initialized
[ 4.529699] IR Sony protocol handler initialized
[ 4.529701] IR RC5 (streamzap) protocol handler initialized
[ 4.529701] IR RC5 (streamzap) protocol handler initialized
[ 4.529703] IR LIRC bridge handler initialized
[ 4.529703] IR LIRC bridge handler initialized
[ 4.529705] Linux video capture interface: v2.00
[ 4.529705] Linux video capture interface: v2.00
[ 4.529933] i2c-core: driver [tuner] using legacy suspend method
[ 4.529933] i2c-core: driver [tuner] using legacy suspend method
[ 4.529936] i2c-core: driver [tuner] using legacy resume method
[ 4.529936] i2c-core: driver [tuner] using legacy resume method
[ 4.530273] i2c-core: driver [msp3400] using legacy suspend method
[ 4.530273] i2c-core: driver [msp3400] using legacy suspend method
[ 4.530276] i2c-core: driver [msp3400] using legacy resume method
[ 4.530276] i2c-core: driver [msp3400] using legacy resume method
[ 4.530555] usbcore: registered new interface driver em28xx
[ 4.530555] usbcore: registered new interface driver em28xx
[ 4.530557] em28xx driver loaded
[ 4.530557] em28xx driver loaded
[ 4.530560] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 4.530560] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 4.530563] gspca: v2.13.0 registered
[ 4.530563] gspca: v2.13.0 registered
[ 4.530720] usbcore: registered new interface driver uvcvideo
[ 4.530720] usbcore: registered new interface driver uvcvideo
[ 4.530722] USB Video Class driver (v1.1.0)
[ 4.530722] USB Video Class driver (v1.1.0)
[ 4.531095] f71882fg: Found f71889ed chip at 0x600, revision 16
[ 4.531095] f7188[ 5.139554] R10: 0000000000000000 R11: 0000000000000001 R12: 00007fffffffd000
[ 5.139556] R13: ffff8800204d4000 R14: ffff880020007548 R15: 0000000020e09000
[ 5.139560] FS: 00007fc956118700(0000) GS:ffff88002f040000(0000) knlGS:0000000000000000
[ 5.139562] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 5.139564] CR2: ffff880020e0a000 CR3: 0000000001a4d000 CR4: 0000000000000660
[ 5.139566] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.139568] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 5.139570] Process init (pid: 1726, threadinfo ffff880020006000, task ffff8800231463c0)
[ 5.139572] Stack:
[ 5.139574] ffff880020007588 ffffffff811006c8 0000000000000000 0000000000000000
[ 5.139579] 0000000000000000 000000021a6ec675 0000000000000001 ffff880020007600
[ 5.139584] 0000000000000000 ffff8800204d4000 00007fffffffefff ffffffffffffffff
[ 5.139589] Call Trace:
[ 5.139592] [<ffffffff811006c8>] unmap_vmas+0x468/0x9f0
[ 5.139596] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 5.139600] [<ffffffff81007fa0>] ? xen_clocksource_read+0x20/0x30
[ 5.139603] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 5.139607] [<ffffffff81053e01>] exit_mm+0x131/0x170
[ 5.139610] [<ffffffff81055c04>] do_exit+0x174/0x860
[ 5.139613] [<ffffffff81765eb0>] ? _raw_spin_unlock_irqrestore+0x40/0x80
[ 5.139617] [<ffffffff81051dda>] ? kmsg_dump+0x4a/0x100
[ 5.139620] [<ffffffff810080f2>] ? check_events+0x12/0x20
[ 5.139623] [<ffffffff8100f62d>] oops_end+0x9d/0xd0
[ 5.139627] [<ffffffff8103323b>] no_context+0xfb/0x260
[ 5.139630] [<ffffffff81004651>] ? pte_mfn_to_pfn+0x91/0xf0
[ 5.139633] [<ffffffff810334c5>] __bad_area_nosemaphore+0x125/0x1f0
[ 5.139638] [<ffffffff81004169>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[ 5.139641] [<ffffffff810335a3>] bad_area_nosemaphore+0x13/0x20
[ 5.139644] [<ffffffff81033ad5>] do_page_fault+0x2f5/0x490
[ 5.139648] [<ffffffff810080df>] ? xen_restore_fl_direct_reloc+0x4/0x4
[ 5.139652] [<ffffffff810e2173>] ? __alloc_pages_nodemask+0x113/0x720
[ 5.139657] [<ffffffff8133e1aa>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[ 5.139663] [<ffffffff817665c5>] page_fault+0x25/0x30
[ 5.139666] [<ffffffff8110016e>] ? __tlb_remove_page+0x9e/0xc0
[ 5.139670] [<ffffffff81100164>] ? __tlb_remove_page+0x94/0xc0
[ 5.139673] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
[ 5.139677] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 5.139680] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 5.139683] [<ffffffff811271b6>] flush_old_exec+0x556/0x800
[ 5.139686] [<ffffffff8116f4a3>] load_elf_binary+0x323/0x1c60
[ 5.139690] [<ffffffff810fd813>] ? follow_page+0x393/0x4f0
[ 5.139693] [<ffffffff810fdff1>] ? __get_user_pages+0x191/0x620
[ 5.139697] [<ffffffff8116c6e9>] ? load_misc_binary+0x89/0x3c0
[ 5.139701] [<ffffffff810fe532>] ? get_user_pages+0x52/0x60
[ 5.139704] [<ffffffff8112638c>] ? get_arg_page+0x5c/0x100
[ 5.139707] [<ffffffff81126913>] search_binary_handler+0xd3/0x2e0
[ 5.139710] [<ffffffff8116f180>] ? elf_map+0x1d0/0x1d0
[ 5.139714] [<ffffffff8112853f>] do_execve_common+0x22f/0x2e0
[ 5.139717] [<ffffffff8111c212>] ? kmem_cache_alloc+0x72/0x150
[ 5.139720] [<ffffffff8112867a>] do_execve+0x3a/0x40
[ 5.139723] [<ffffffff8101551a>] sys_execve+0x4a/0x80
[ 5.139727] [<ffffffff817670bc>] stub_execve+0x6c/0xc0
[ 5.139729] Code: 0f 1f 84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 65 8b 04 25 50 dc 00 00 85 c0 75 0e 65 c7 04 25
50 dc 00 00 01 00 00 00 c9 c3 <0f> 0b eb fe 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 66 66 66
[ 5.139783] RIP [<ffffffff8102fe33>] paravirt_enter_lazy_mmu+0x23/0x30
[ 5.139787] RSP <ffff880020007448>
[ 5.139789] ---[ end trace 09caa95ef9593519 ]---
[ 5.139791] Fixing recursive fault but reboot is needed!
[ 5.968091] usb 8-5: new high speed USB device number 4 using ehci_hcd
[ 6.108696] usb 8-5: New USB device found, idVendor=17e9, idProduct=019b
[ 6.112573] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.112573] usb 8-5: Product: USB to DVI Adapter
[ 6.112573] usb 8-5: Manufacturer: DisplayLink
[ 6.112573] usb 8-5: SerialNumber: 019B-001912
[ 6.138742] udlfb: DisplayLink USB to DVI Adapter - serial #019B-001912
[ 6.142725] udlfb: vid_17e9&pid_019b&rev_0003 driver's dlfb_data struct at ffff8800205b3000
[ 6.142725] udlfb: console enable=0
[ 6.142725] udlfb: fb_defio enable=0
[ 6.160557] udlfb: vendor descriptor length:e0 data:ffffffc2 ffffffc2 ffffffc2 ffffffc2ffffffc2 ffffffc2 ffffffc2 fff
fffc2 ffffffc2 ffffffc2 ffffffc2
[ 6.164526] udlfb: Unrecognized vendor firmware descriptor
[ 6.172372] udlfb: allocated 4 65024 byte urbs
[ 6.365621] udlfb: Unable to get valid EDID from device/display
[ 6.369514] udlfb: 640x350 valid mode
[ 6.369514] udlfb: 640x400 valid mode
[ 6.369514] udlfb: 721x400 valid mode
[ 6.369514] udlfb: 640x480 valid mode
[ 6.369514] udlfb: 640x480 valid mode
[ 6.369514] udlfb: 640x480 valid mode
[ 6.369514] udlfb: 640x480 valid mode
[ 6.369514] udlfb: 800x600 valid mode
[ 6.369514] udlfb: 800x600 valid mode
[ 6.369514] udlfb: 800x600 valid mode
[ 6.369514] udlfb: 800x600 valid mode
[ 6.369514] udlfb: 800x600 valid mode
[ 6.369514] udlfb: 1024x768 valid mode
[ 6.369514] udlfb: 1024x768 valid mode
[ 6.369514] udlfb: 1024x768 valid mode
[ 6.369514] udlfb: 1024x768 valid mode
[ 6.451882] udlfb: 1024x768 valid mode
[ 6.455861] udlfb: 1152x864 valid mode
[ 6.455861] udlfb: 1280x960 valid mode
[ 6.455861] udlfb: 1280x960 valid mode
[ 6.455861] udlfb: 1280x1024 valid mode
[ 6.455861] udlfb: 1280x1024 valid mode
[ 6.455861] udlfb: 1280x1024 valid mode
[ 6.455861] udlfb: 1600x1200 valid mode
[ 6.455861] udlfb: 1600x1200 valid mode
[ 6.455861] udlfb: 1600x1200 valid mode
[ 6.455861] udlfb: 1600x1200 valid mode
[ 6.455861] udlfb: 1600x1200 valid mode
[ 6.455861] udlfb: 1792x1344 beyond chip capabilities
[ 6.455861] udlfb: 1792x1344 beyond chip capabilities
[ 6.455861] udlfb: 1856x1392 beyond chip capabilities
[ 6.455861] udlfb: 1856x1392 beyond chip capabilities
[ 6.455861] udlfb: 1920x1440 beyond chip capabilities
[ 6.455861] udlfb: 1920x1440 beyond chip capabilities
[ 6.455861] udlfb: Reallocating framebuffer. Addresses will change!
[ 6.531120] ------------[ cut here ]------------
[ 6.532810] WARNING: at lib/dma-debug.c:875 check_for_stack+0xad/0xf0()
[ 6.532810] Hardware name: MS-7640
[ 6.532810] ehci_hcd 0000:07:01.2: DMA-API: device driver maps memory fromstack [addr=ffff880023321960]
[ 6.532810] Modules linked in:
[ 6.532810] Pid: 563, comm: khubd Tainted: G D 3.0.0-xen-3.1-konrad-master-20110722+ #1
[ 6.532810] Call Trace:
[ 6.532810] [<ffffffff8105180f>] warn_slowpath_common+0x7f/0xc0
[ 6.532810] [<ffffffff81051906>] warn_slowpath_fmt+0x46/0x50
[ 6.532810] [<ffffffff813517dd>] check_for_stack+0xad/0xf0
[ 6.532810] [<ffffffff81353389>] debug_dma_map_page+0x179/0x1e0
[ 6.532810] [<ffffffff814e9a0c>] usb_hcd_map_urb_for_dma+0x5ec/0x6a0
[ 6.532810] [<ffffffff814e9c6e>] usb_hcd_submit_urb+0x14e/0x780
[ 6.532810] [<ffffffff8110d360>] ? __vmalloc_node_range+0x140/0x1e0
[ 6.532810] [<ffffffff813a5e02>] ? dlfb_setup_modes+0x512/0x580
[ 6.532810] [<ffffffff814eb365>] usb_submit_urb+0xe5/0x2b0
[ 6.532810] [<ffffffff814ecae3>] usb_start_wait_urb+0x63/0x100
[ 6.532810] [<ffffffff814eba18>] ? usb_init_urb+0x28/0x40
[ 6.532810] [<ffffffff814ecdc8>] usb_control_msg+0xe8/0x120
[ 6.532810] [<ffffffff813a7b11>] dlfb_usb_probe+0x441/0x850
[ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
[ 6.532810] [<ffffffff814eee66>] usb_probe_interface+0x106/0x1c0
[ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
[ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
[ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
[ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
[ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
[ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
[ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
[ 6.532810] [<ffffffff814edd4e>] usb_set_configuration+0x45e/0x690
[ 6.532810] [<ffffffff811917ea>] ? sysfs_do_create_link+0xfa/0x220
[ 6.532810] [<ffffffff814f6914>] generic_probe+0x44/0xa0
[ 6.532810] [<ffffffff814ee1da>] usb_probe_device+0x1a/0x20
[ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
[ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
[ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
[ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
[ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
[ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
[ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
[ 6.532810] [<ffffffff814ed8d9>] ? usb_cache_string+0x99/0xb0
[ 6.532810] [<ffffffff814e5a27>] usb_new_device+0x167/0x1f0
[ 6.532810] [<ffffffff814e72f8>] hub_thread+0xba8/0x1330
[ 6.532810] [<ffffffff8176331f>] ? schedule+0x42f/0xa70
[ 6.532810] [<ffffffff81074e20>] ? wake_up_bit+0x40/0x40
[ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
[ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
[ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
[ 6.532810] [<ffffffff810748d6>] kthread+0x96/0xa0
[ 6.532810] [<ffffffff81767a64>] kernel_thread_helper+0x4/0x10
[ 6.532810] [<ffffffff81766341>] ? retint_restore_args+0x13/0x13
[ 6.532810] [<ffffffff81767a60>] ? gs_change+0x13/0x13
[ 6.532810] ---[ end trace 09caa95ef959351a ]---
[ 6.719795] udlfb: 800x600 valid mode
[ 6.723707] udlfb: set_par mode 800x600
[ 6.730051] udlfb: DisplayLink USB device /dev/fb1 attached. 800x600 resolution. Using 1880K framebuffer memory
[ 6.844227] usb 9-1: new high speed USB device number 2 using ehci_hcd
[ 21.942582] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 21.950005] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 21.957305] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 21.964491] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 21.971569] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 21.976089] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 22.186489] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.193290] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.199963] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.206537] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.213089] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.217133] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 22.426575] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.433135] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.439601] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.446031] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.452367] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.456245] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 22.666570] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.672951] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.679275] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.685550] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.691744] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 22.695437] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 22.902540] ei_hcd 0000:04:00: port 1 reset eor -110
[ 22.908736] eh_hcd 0000:04:00. port 1 reset eror -110
[ 22.914877] eh_hcd 0000:04:00. port 1 reset err -110
[ 22.920970] ehchcd 0000:04:00.1port 1 reset err -110
[ 22.927010] ehcicd 0000:04:00.1:ort 1 reset erro-110
[ 22.930550] hub 9-0:0: hub_port_stat failed (err = -)
[ 22.93411 hub 9-0:1.0: Caot enable port 1 Maybe the USB cle is bad?
[ 22.994582] ei_hcd 0000:04:00: port 1 reset eor -110
[ 23.000704] ehchcd 0000:04:00.1port 1 reset err -110
[ 23.006725] ehchcd 0000:04:00.1port 1 reset err -110
[ 23.012724] ehcicd 0000:04:00.1:ort 1 reset erro-110
[ 23.018664] ehci_d 0000:04:00.1: rt 1 reset error-110
[ 23.0219] hub 9-0:1.0:ub_port_status fled (err = -32)[ 23.230576] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.236515] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.242425] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.248254] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.254069] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.257372] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 23.466489] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.472330] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.478127] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.483852] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.489509] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.492657] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 23.698575] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.704324] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.710016] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.715622] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.721170] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.724215] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 23.930615] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.936183] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.941542] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.946736] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.951786] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 23.954414] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 23.957096] hub 9-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 24.014573] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.019961] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.025235] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.030443] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.035649] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.038375] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 24.246578] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.251964] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.257226] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.262429] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.267629] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.270379] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 24.478578] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.483925] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.489208] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.494401] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.499591] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.502335] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 24.710570] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.715949] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.721209] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.726403] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.731604] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.734345] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 24.942579] ei_hcd 0000:04:00: port 1 reset eor -110
[ 2447955] ehci_hcd 00:04:00.1: port reset error -11
[ 24.953203]hci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.958360] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 24.963429] ehci_hcd 0000:0:00.1: port 1 ret error -110
[ 24.965991] hub 0:1.0: hub_port_atus failed (err -32)
[ 24.9662] hub 9-0:1.0Cannot enable po 1. Maybe the U cable is bad?[ 25.026528] ei_hcd 0000:04:00: port 1 reset eor -110
[ 2531913] ehci_hcd 00:04:00.1: port reset error -11
[ 25.037177]hci_hcd 0000:04:.1: port 1 resetrror -110
[ .042376] ehci_hc0000:04:00.1: po 1 reset error -0
[ 25.04757 ehci_hcd 0000:000.1: port 1 res error -110
[ 25.050328] hub 9:1.0: hub_port_stus failed (err -32)
[ 25.258582] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.263965] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.269224] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.274422] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.279615] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.282364] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 25.490594] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.495977] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.501228] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.506427] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.511620] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.514364] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 25.722565] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.727937] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.733197] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.738384] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.743544] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.746254] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 25.954582] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.959958] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.965206] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.970395] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.975464] ehci_hcd 0000:04:00.1: port 1 reset error -110
[ 25.978027] hub 9-0:1.0: hub_port_status failed (err = -32)
[ 25.980693] hub 9-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 25.983502] hub 9-0:1.0: unable to enumerate USB device on port 1
[ 26.164193] usb 11-1: new high speed USB device number 2 using ehci_hcd
[ 26.299946] usb 11-1: New USB device found, idVendor=05e3, idProduct=0608
[ 26.302904] usb 11-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 26.303894] usb 11-1: Product: USB2.0 Hub
[ 26.309942] hub 11-1:1.0: USB hub found
[ 26.313764] hub 11-1:1.0: 4 ports detected
[ 26.448197] usb 16-4: new low speed USB device number 2 using ohci_hcd
[ 26.613957] usb 16-4: New USB device found, idVendor=046d, idProduct=c517
[ 26.617248] usb 16-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 26.617899] usb 16-4: Product: USB Receiver
[ 26.617899] usb 16-4: Manufacturer: Logitech
[ 26.634839] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb16/16-4/16-4:1.0/input/input2
[ 26.638876] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:0
0:16.0-4/input0
[ 26.651073] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 26.656066] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb16/16-4/16-4:1.1/input/input3
[ 26.660775] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0
000:00:16.0-4/input1
[ 26.920195] u 21-2: new full eed USB device nber 2 using ohcicd
[ 27.088624] u 21-2: New USB dice found, idVenr=067b, idProduc2303
[ 27.0904] usb 21-2: NeUSB device strings: Mfr=1, Produ=2, SerialNumber
[ 27.092504usb 21-2: Produc USB-Serial Contller
[ 27.0904] usb 21-2: Mafacturer: Prolif Technology Inc.
[ 27.109817] 2303 21-2:1.0: p303 converter dected
[ 27.146885] u 21-2: pl2303 coerter now attach to ttyUSB0
[ 27.404195] usb 22-2: new full speed USB device number 2 using ohci_hcd
[ 27.576128] usb 22-2: New USB device found, idVendor=1130, idProduct=f211
[ 27.580001] usb 22-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 27.580001] usb 22-2: Product: USB AUDIO
[ 27.615893] input: USB AUDIO as /devices/pci0000:00/0000:00:0a.0/0000:06:00.0/0000:07:01.1/usb22/22-2/22-2:1.3/inp
ut/input4
[ 27.621611] generic-usb 0003:1130:F211.0003: input,hidraw2: USB HID v1.10 Device [USB AUDIO ] on usb-0000:07:01.1-2
/input3
[ 27.634682] input: USB AUDIO as /devices/pci0000:00/0000:00:0a.0/0000:06:00.0/0000:07:01.1/usb22/22-2/22-2:1.4/inp
ut/input5
[ 27.640910] generic-usb 0003:1130:F211.0004: input,hidraw3: USB HID v1.10 Device [USB AUDIO ] on usb-0000:07:01.1-2
/input4
[ 28.028114] usb 23-1: new full speed USB device number 2 using ohci_hcd
[ 28.182438] usb 23-1: not running at top speed; connect to a high speed hub
[ 28.191446] usb 23-1: New USB device found, idVendor=eb1a, idProduct=2860
[ 28.195322] usb 23-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 28.205554] em28xx: New device @ 12 Mbps (eb1a:2860, interface 0, class 0)
[ 28.209530] em28xx: Device initialization failed.
[ 28.209530] em28xx: Device mu be connected to high-speed USB 0 port.
[ 28.480188] usb 24-1: new low speed USB device number 2 using ohci_hcd
[ 28.651272] usb 24-1: New USB device found, idVendor=10cf, idProduct=5500
[ 28.655152] usb 24-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 28.655152] usb 24-1: Product: USB K8055
[ 28.655152] usb 24-1: Manufacturer: Velleman
[ 28.688488] generic-usb 0003:10CF:5500.0005: hiddev0,hidraw4: USB HID v1.00 Device [Velleman USB K8055] on usb-0000:
04:00.2-1/input0
[ 28.768776] usb 11-1.4: new high speed USB device number 3 using ehci_hcd
[ 28.877514] usb 11-1.4: New USB device found, idVendor=2304, idProduct=0208
[ 28.881390] usb 11-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 28.881390] usb 11-1.4: Product: PCTV USB2 PAL
[ 28.881390] usb 11-1.4: Manufacturer: Pinnacle Systems GmbH
[ 28.907714] em28xx: New device Pinnacle Systems GmbH PCTV USB2 PAL @ 480 Mbps (2304:0208, interface 0, class 0)
[ 28.915877] em28xx #0: chip ID is em2820 (or em2710)
[ 29.064869] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 1e 6a 2e
[ 29.068748] em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00
[ 29.068748] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00
[ 29.068748] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 29.068748] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00
[ 29.068748] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 1e 03 50 00 43 00 54 00
[ 29.068748] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00
[ 29.068748] em28xx #0: i2c eeprom b0: 41 00 4c 00 00 00 06 03 31 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 29.068748] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 07 56 d9 35 01 ed 0b f8
[ 29.068748] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x0fd77740
[ 29.068748] em28xx #0: EEPROM info:
[ 29.068748] em28xx #0: AC97 audio (5 sample rates)
[ 29.068748] em28xx #0: 500mA max power
[ 29.068748] em28xx #0: Table at 0x06, strings=0x1e98, 0x2e6a, 0x0000
[ 29.224385] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
[ 29.233168] BUG: unable to handle kernel paging request at ffff880020221000
[ 29.236056] IP: [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.244097] PGD 1a4e067 PUD 1a52067 PMD 2ff67067 PTE 8010000020221064
[ 29.244097] Oops: 0002 [#3] SMP DEBUG_PAGEALLOC
[ 29.256140] CPU 5
[ 29.256140] Modules linked in:
[ 29.256140]
[ 29.256140] Pid: 1785, comm: modprobe Tainted: G D W 3.0.0-xen-3.1-konrad-master-20110722+ #1 MSI MS-7640/890F
XA-GD70 (MS-7640)
[ 29.256140] RIP: e030:[<ffffffff8110016e>] [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.256140] RSP: e02b:ffff88002024fc38 EFLAGS: 00010286
[ 29.256140] RAX: 0000000000000000 RBX: ffff88002024fd98 RCX: ffff880020221000
[ 29.256140] RDX: ffff880020221000 RSI: ffff88002f0f8000 RDI: 0000000000000000
[ 29.256140] RBP: ffff88002024fc48 R08: 00003ffffffff000 R09: ffff880000000000
[ 29.256140] R10: 0000000000000000 R11: ffffffff81af32d0 R12: 0000000000407000
[ 29.256140] R13: ffff88002876c3c8 R14: ffff88002024fd48 R15: ffff8800200c4680
[ 29.256140] FS: 00007f3469119700(0000) GS:ffff88002f0a8000(0000) knlGS:0000000000000000
[ 29.256140] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 29.256140] CR2: ffff880020221000 CR3: 0000000001a4d000 CR4: 0000000000000660
[ 29.256140] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 29.256140] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 29.256140] Process modprobe (pid: 1785, threadinfo ffff88002024e000, task ffff880023318000)
[ 29.256140] Stack:
[ 29.256140] 0000000000000006 ffff8800201c7038 ffff88002024fd88 ffffffff8110086d
[ 29.256140] ffffffff810080f2 0000000000000246 0000000000000000 0000000000000000
[ 29.256140] ffffffff81afcce8 ffff88002024fe00 0000000000000000 ffff8800200c4680
[ 29.256140] Call Trace:
[ 29.256140] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
[ 29.256140] [<ffffffff810080f2>] ? check_events+0x12/0x20
[ 29.256140] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
[ 29.256140] [<ffffffff8104f41f>] mmput+0x4f/0xe0
[ 29.256140] [<ffffffff81053e01>] exit_mm+0x131/0x170
[ 29.256140] [<ffffffff81055c04>] do_exit+0x174/0x860
[ 29.256140] [<ffffffff8111ba30>] ? kmem_cache_free+0x20/0x130
[ 29.256140] [<ffffffff81056345>] do_group_exit+0x55/0xf0
[ 29.256140] [<ffffffff810563f7>] sys_exit_group+0x17/0x20
[ 29.256140] [<ffffffff81766c42>] system_call_fastpath+0x16/0x1b
[ 29.256140] Code: e8 68 f2 00 00 48 83 c4 08 b8 01 00 00 00 5b c9 c3 0f 1f 40 00 31 f6 bf 00 02 00 00 e8 cc 26 fe ff
48 89 c1 31 c0 48 85 c9 74 a2
[ 29.256140] c7 01 00 00 00 00 c7 41 08 00 00 00 00 c7 41 0c fe 01 00 00
[ 29.256140] RIP [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
[ 29.256140] RSP <ffff88002024fc38>
[ 29.256140] CR2: ffff880020221000
[ 29.256140] ---[ end trace 09caa95ef959351b ]---
[ 29.256140] Fixing recursive fault but reboot is needed!
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Warn/panics booting Konrad's master tree under xen 4.1.1
2011-07-23 19:40 Warn/panics booting Konrad's master tree under xen 4.1.1 Sander Eikelenboom
@ 2011-07-25 14:44 ` Konrad Rzeszutek Wilk
2011-07-25 15:04 ` Sander Eikelenboom
0 siblings, 1 reply; 4+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-07-25 14:44 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel
On Sat, Jul 23, 2011 at 09:40:10PM +0200, Sander Eikelenboom wrote:
> Hi Konrad,
Hey Sander,
>
> I have tried your current master tree (commit 602d7a606974c54dc8bd61527c051d7d697a5f86) as domU (under xen 4.1.1 and a 2.6.32.35 dom0), that seems to work fine.
>
Great..
> I have tried to use the same kernel as dom0 as well, but i get the warns/panic below, when i boot the kernel bare metal it works ok.
OK, so only as Dom0 you get this.
> Complete serial log is attached, i have re-compiled with and without pv-spinlocks but there is no difference.
>
> Also xen-pciback compiled in, with xen-pciback.hide as kernel boot parameter doesn't seem to seize the devices.
Can you attach the .config file please? And the lspci/lsusb for your Pinnacle capture thingy.
You have been doing the USB passthrough for some time right - is this a new piece of hardware
or was it the one you used for some time?
> [ 5.139589] Call Trace:
> [ 5.139592] [<ffffffff811006c8>] unmap_vmas+0x468/0x9f0
> [ 5.139596] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
> [ 5.139600] [<ffffffff81007fa0>] ? xen_clocksource_read+0x20/0x30
> [ 5.139603] [<ffffffff8104f41f>] mmput+0x4f/0xe0
> [ 5.139607] [<ffffffff81053e01>] exit_mm+0x131/0x170
> [ 5.139610] [<ffffffff81055c04>] do_exit+0x174/0x860
> [ 5.139613] [<ffffffff81765eb0>] ? _raw_spin_unlock_irqrestore+0x40/0x80
> [ 5.139617] [<ffffffff81051dda>] ? kmsg_dump+0x4a/0x100
> [ 5.139620] [<ffffffff810080f2>] ? check_events+0x12/0x20
> [ 5.139623] [<ffffffff8100f62d>] oops_end+0x9d/0xd0
> [ 5.139627] [<ffffffff8103323b>] no_context+0xfb/0x260
> [ 5.139630] [<ffffffff81004651>] ? pte_mfn_to_pfn+0x91/0xf0
> [ 5.139633] [<ffffffff810334c5>] __bad_area_nosemaphore+0x125/0x1f0
> [ 5.139638] [<ffffffff81004169>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
> [ 5.139641] [<ffffffff810335a3>] bad_area_nosemaphore+0x13/0x20
> [ 5.139644] [<ffffffff81033ad5>] do_page_fault+0x2f5/0x490
> [ 5.139648] [<ffffffff810080df>] ? xen_restore_fl_direct_reloc+0x4/0x4
> [ 5.139652] [<ffffffff810e2173>] ? __alloc_pages_nodemask+0x113/0x720
> [ 5.139657] [<ffffffff8133e1aa>] ? trace_hardirqs_off_thunk+0x3a/0x6c
> [ 5.139663] [<ffffffff817665c5>] page_fault+0x25/0x30
> [ 5.139666] [<ffffffff8110016e>] ? __tlb_remove_page+0x9e/0xc0
> [ 5.139670] [<ffffffff81100164>] ? __tlb_remove_page+0x94/0xc0
> [ 5.139673] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
> [ 5.139677] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
> [ 5.139680] [<ffffffff8104f41f>] mmput+0x4f/0xe0
> [ 5.139683] [<ffffffff811271b6>] flush_old_exec+0x556/0x800
> [ 5.139686] [<ffffffff8116f4a3>] load_elf_binary+0x323/0x1c60
.. snip.. Hm, that is definitly bad.
> [ 6.455861] udlfb: Reallocating framebuffer. Addresses will change!
> [ 6.531120] ------------[ cut here ]------------
> [ 6.532810] WARNING: at lib/dma-debug.c:875 check_for_stack+0xad/0xf0()
> [ 6.532810] Hardware name: MS-7640
> [ 6.532810] ehci_hcd 0000:07:01.2: DMA-API: device driver maps memory fromstack [addr=ffff880023321960]
Ah, that one reminds of the USB floppy bug. Not a big problem but annoying.
> [ 6.532810] Modules linked in:
> [ 6.532810] Pid: 563, comm: khubd Tainted: G D 3.0.0-xen-3.1-konrad-master-20110722+ #1
> [ 6.532810] Call Trace:
> [ 6.532810] [<ffffffff8105180f>] warn_slowpath_common+0x7f/0xc0
> [ 6.532810] [<ffffffff81051906>] warn_slowpath_fmt+0x46/0x50
> [ 6.532810] [<ffffffff813517dd>] check_for_stack+0xad/0xf0
> [ 6.532810] [<ffffffff81353389>] debug_dma_map_page+0x179/0x1e0
> [ 6.532810] [<ffffffff814e9a0c>] usb_hcd_map_urb_for_dma+0x5ec/0x6a0
> [ 6.532810] [<ffffffff814e9c6e>] usb_hcd_submit_urb+0x14e/0x780
> [ 6.532810] [<ffffffff8110d360>] ? __vmalloc_node_range+0x140/0x1e0
> [ 6.532810] [<ffffffff813a5e02>] ? dlfb_setup_modes+0x512/0x580
> [ 6.532810] [<ffffffff814eb365>] usb_submit_urb+0xe5/0x2b0
> [ 6.532810] [<ffffffff814ecae3>] usb_start_wait_urb+0x63/0x100
> [ 6.532810] [<ffffffff814eba18>] ? usb_init_urb+0x28/0x40
> [ 6.532810] [<ffffffff814ecdc8>] usb_control_msg+0xe8/0x120
> [ 6.532810] [<ffffffff813a7b11>] dlfb_usb_probe+0x441/0x850
> [ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
> [ 6.532810] [<ffffffff814eee66>] usb_probe_interface+0x106/0x1c0
> [ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
> [ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
> [ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
> [ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
> [ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
> [ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
> [ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
> [ 6.532810] [<ffffffff814edd4e>] usb_set_configuration+0x45e/0x690
> [ 6.532810] [<ffffffff811917ea>] ? sysfs_do_create_link+0xfa/0x220
> [ 6.532810] [<ffffffff814f6914>] generic_probe+0x44/0xa0
> [ 6.532810] [<ffffffff814ee1da>] usb_probe_device+0x1a/0x20
> [ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
> [ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
> [ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
> [ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
> [ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
> [ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
> [ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
> [ 6.532810] [<ffffffff814ed8d9>] ? usb_cache_string+0x99/0xb0
> [ 6.532810] [<ffffffff814e5a27>] usb_new_device+0x167/0x1f0
> [ 6.532810] [<ffffffff814e72f8>] hub_thread+0xba8/0x1330
> [ 6.532810] [<ffffffff8176331f>] ? schedule+0x42f/0xa70
> [ 6.532810] [<ffffffff81074e20>] ? wake_up_bit+0x40/0x40
> [ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
> [ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
> [ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
> [ 6.532810] [<ffffffff810748d6>] kthread+0x96/0xa0
> [ 6.532810] [<ffffffff81767a64>] kernel_thread_helper+0x4/0x10
> [ 6.532810] [<ffffffff81766341>] ? retint_restore_args+0x13/0x13
> [ 6.532810] [<ffffffff81767a60>] ? gs_change+0x13/0x13
> [ 6.532810] ---[ end trace 09caa95ef959351a ]---
>
>
>
>
> [ 29.224385] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
> [ 29.233168] BUG: unable to handle kernel paging request at ffff880020221000
> [ 29.236056] IP: [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
And this is even worst..
> [ 29.244097] PGD 1a4e067 PUD 1a52067 PMD 2ff67067 PTE 8010000020221064
> [ 29.244097] Oops: 0002 [#3] SMP DEBUG_PAGEALLOC
> [ 29.256140] CPU 5
> [ 29.256140] Modules linked in:
> [ 29.256140]
> [ 29.256140] Pid: 1785, comm: modprobe Tainted: G D W 3.0.0-xen-3.1-konrad-master-20110722+ #1 MSI MS-7640/890F
> XA-GD70 (MS-7640)
> [ 29.256140] RIP: e030:[<ffffffff8110016e>] [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
> [ 29.256140] RSP: e02b:ffff88002024fc38 EFLAGS: 00010286
> [ 29.256140] RAX: 0000000000000000 RBX: ffff88002024fd98 RCX: ffff880020221000
> [ 29.256140] RDX: ffff880020221000 RSI: ffff88002f0f8000 RDI: 0000000000000000
> [ 29.256140] RBP: ffff88002024fc48 R08: 00003ffffffff000 R09: ffff880000000000
> [ 29.256140] R10: 0000000000000000 R11: ffffffff81af32d0 R12: 0000000000407000
> [ 29.256140] R13: ffff88002876c3c8 R14: ffff88002024fd48 R15: ffff8800200c4680
> [ 29.256140] FS: 00007f3469119700(0000) GS:ffff88002f0a8000(0000) knlGS:0000000000000000
> [ 29.256140] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 29.256140] CR2: ffff880020221000 CR3: 0000000001a4d000 CR4: 0000000000000660
> [ 29.256140] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 29.256140] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 29.256140] Process modprobe (pid: 1785, threadinfo ffff88002024e000, task ffff880023318000)
> [ 29.256140] Stack:
> [ 29.256140] 0000000000000006 ffff8800201c7038 ffff88002024fd88 ffffffff8110086d
> [ 29.256140] ffffffff810080f2 0000000000000246 0000000000000000 0000000000000000
> [ 29.256140] ffffffff81afcce8 ffff88002024fe00 0000000000000000 ffff8800200c4680
> [ 29.256140] Call Trace:
> [ 29.256140] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
> [ 29.256140] [<ffffffff810080f2>] ? check_events+0x12/0x20
> [ 29.256140] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
> [ 29.256140] [<ffffffff8104f41f>] mmput+0x4f/0xe0
> [ 29.256140] [<ffffffff81053e01>] exit_mm+0x131/0x170
> [ 29.256140] [<ffffffff81055c04>] do_exit+0x174/0x860
> [ 29.256140] [<ffffffff8111ba30>] ? kmem_cache_free+0x20/0x130
> [ 29.256140] [<ffffffff81056345>] do_group_exit+0x55/0xf0
> [ 29.256140] [<ffffffff810563f7>] sys_exit_group+0x17/0x20
> [ 29.256140] [<ffffffff81766c42>] system_call_fastpath+0x16/0x1b
> [ 29.256140] Code: e8 68 f2 00 00 48 83 c4 08 b8 01 00 00 00 5b c9 c3 0f 1f 40 00 31 f6 bf 00 02 00 00 e8 cc 26 fe ff
> 48 89 c1 31 c0 48 85 c9 74 a2
> [ 29.256140] c7 01 00 00 00 00 c7 41 08 00 00 00 00 c7 41 0c fe 01 00 00
> [ 29.256140] RIP [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
> [ 29.256140] RSP <ffff88002024fc38>
> [ 29.256140] CR2: ffff880020221000
> [ 29.256140] ---[ end trace 09caa95ef959351b ]---
> [ 29.256140] Fixing recursive fault but reboot is needed!
>
> \ // _ \ '_ \ || |_ | | | |
> \ __/ | | | | _|| |_| |
> /\_\___|_| |_| _|(_)_(_)_|
>
> (XENXen version 4.1.(root@dyndns.org(gcc version 4.4 (Debian 4.4.5-8) Thu Jun 16 11::46 CEST 2011
> (N) Latest Changet: Tue Jun 14 142:48 2011 +0100 079:73a8061b01f1(XEN) BootloaderGRUB 1.98+201008-14
> (XEN) Comma line: dom0_mem=8M loglvl=all lovl_guest=all conle_timestamps vga=gfx-1280x1024x3cpuidle cpufreq=n noreboot d
> ebugapic=debug apic_rbosity=debug ap=debug acpi_enfoe_resources=lax mmu=on,amd-iommuebug amd_iommu=oamd-iommu-debug m1=1
> 15200,8n1 coole=vga,com1
<blinks>
dom0_mem=8M? Ah looks like your serial console is being eaten up. N/m then.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Warn/panics booting Konrad's master tree under xen 4.1.1
2011-07-25 14:44 ` Konrad Rzeszutek Wilk
@ 2011-07-25 15:04 ` Sander Eikelenboom
2011-07-26 21:03 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 4+ messages in thread
From: Sander Eikelenboom @ 2011-07-25 15:04 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel
[-- Attachment #1: Type: text/plain, Size: 14292 bytes --]
Monday, July 25, 2011, 4:44:38 PM, you wrote:
> On Sat, Jul 23, 2011 at 09:40:10PM +0200, Sander Eikelenboom wrote:
>> Hi Konrad,
> Hey Sander,
>>
>> I have tried your current master tree (commit 602d7a606974c54dc8bd61527c051d7d697a5f86) as domU (under xen 4.1.1 and a 2.6.32.35 dom0), that seems to work fine.
>>
> Great..
Yes, and i hope your 3 times retry with swiotbl will also help for the observed problems with allocating dma mem after some time.
>> I have tried to use the same kernel as dom0 as well, but i get the warns/panic below, when i boot the kernel bare metal it works ok.
> OK, so only as Dom0 you get this.
Yes.
>> Complete serial log is attached, i have re-compiled with and without pv-spinlocks but there is no difference.
>>
>> Also xen-pciback compiled in, with xen-pciback.hide as kernel boot parameter doesn't seem to seize the devices.
> Can you attach the .config file please? And the lspci/lsusb for your Pinnacle capture thingy.
> You have been doing the USB passthrough for some time right - is this a new piece of hardware
> or was it the one you used for some time?
.config of the 3.0+ kernel attached
lspci and lsusb attached (from booting with 2.6.32.35 kernel, (since the 3.0+ kernel panics on boot), so you don't see the usb devices in the lsusb, since pass through of the usb cards works in this case)
The pinnacle and kworld usb video capture devices (both em28xx based) should have been passedthrough, and i'm using them for quite some time, so no they are not new.
I do have the xen-pciback lines in grub (exactly the same as for the 2.6.32.35 kernel, except for the xen-pciback.passthrough=passthrough parameter because with 2.6.32.35 you specify it at compile time ), but it seems no device gets seized by pciback some how.
grub lines:
menuentry ' XEN 4.1.1 Debian GNU/Linux, with Linux 3.0.0-xen-3.1-konrad-master-20110722+' --class debian --class gnu-linux --class gnu --class os --class xen {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set b45b2279-dbde-4808-b9ec-4745e598c8d2
echo 'Loading Linux 3.0.0-xen-3.1-konrad-master-20110722+ ...'
multiboot /xen-4.1.1.gz dom0_mem=768M loglvl=all loglvl_guest=all console_timestamps vga=gfx-1280x1024x32 cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug acpi_enforce_resources=lax iommu=on,amd-iommu-debug amd_iommu=on amd-iommu-debug com1=115200,8n1 console=vga,com1
module /vmlinuz-3.0.0-xen-3.1-konrad-master-20110722+ root=/dev/mapper/serveerstertje-root ro console=hvc0 console=tty console=vga nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.passthrough=passthrough xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resource_alignment=07:01.0\;07:01.1\;07:01.2
echo 'Loading initial ramdisk ...'
module /initrd.img-3.0.0-xen-3.1-konrad-master-20110722+
}
menuentry ' XEN 4.1.1 Debian GNU/Linux, with Linux 2.6.32.35-xen-next-2.6.32.x-20110325' --class debian --class gnu-linux --class gnu --class os --class xen {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set b45b2279-dbde-4808-b9ec-4745e598c8d2
echo 'Loading Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ...'
multiboot /xen-4.1.1.gz dom0_mem=768M loglvl=all loglvl_guest=all console_timestamps vga=gfx-1280x1024x32 cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug acpi_enforce_resources=lax iommu=on,amd-iommu-debug amd_iommu=on amd-iommu-debug com1=115200,8n1 console=vga,com1
module /vmlinuz-2.6.32.35-xen-next-2.6.32.x-20110325 root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) pci=resource_alignment=07:01.0\;07:01.1\;07:01.2
echo 'Loading initial ramdisk ...'
module /initrd.img-2.6.32.35-xen-next-2.6.32.x-20110325
}
>> [ 5.139589] Call Trace:
>> [ 5.139592] [<ffffffff811006c8>] unmap_vmas+0x468/0x9f0
>> [ 5.139596] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
>> [ 5.139600] [<ffffffff81007fa0>] ? xen_clocksource_read+0x20/0x30
>> [ 5.139603] [<ffffffff8104f41f>] mmput+0x4f/0xe0
>> [ 5.139607] [<ffffffff81053e01>] exit_mm+0x131/0x170
>> [ 5.139610] [<ffffffff81055c04>] do_exit+0x174/0x860
>> [ 5.139613] [<ffffffff81765eb0>] ? _raw_spin_unlock_irqrestore+0x40/0x80
>> [ 5.139617] [<ffffffff81051dda>] ? kmsg_dump+0x4a/0x100
>> [ 5.139620] [<ffffffff810080f2>] ? check_events+0x12/0x20
>> [ 5.139623] [<ffffffff8100f62d>] oops_end+0x9d/0xd0
>> [ 5.139627] [<ffffffff8103323b>] no_context+0xfb/0x260
>> [ 5.139630] [<ffffffff81004651>] ? pte_mfn_to_pfn+0x91/0xf0
>> [ 5.139633] [<ffffffff810334c5>] __bad_area_nosemaphore+0x125/0x1f0
>> [ 5.139638] [<ffffffff81004169>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
>> [ 5.139641] [<ffffffff810335a3>] bad_area_nosemaphore+0x13/0x20
>> [ 5.139644] [<ffffffff81033ad5>] do_page_fault+0x2f5/0x490
>> [ 5.139648] [<ffffffff810080df>] ? xen_restore_fl_direct_reloc+0x4/0x4
>> [ 5.139652] [<ffffffff810e2173>] ? __alloc_pages_nodemask+0x113/0x720
>> [ 5.139657] [<ffffffff8133e1aa>] ? trace_hardirqs_off_thunk+0x3a/0x6c
>> [ 5.139663] [<ffffffff817665c5>] page_fault+0x25/0x30
>> [ 5.139666] [<ffffffff8110016e>] ? __tlb_remove_page+0x9e/0xc0
>> [ 5.139670] [<ffffffff81100164>] ? __tlb_remove_page+0x94/0xc0
>> [ 5.139673] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
>> [ 5.139677] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
>> [ 5.139680] [<ffffffff8104f41f>] mmput+0x4f/0xe0
>> [ 5.139683] [<ffffffff811271b6>] flush_old_exec+0x556/0x800
>> [ 5.139686] [<ffffffff8116f4a3>] load_elf_binary+0x323/0x1c60
> .. snip.. Hm, that is definitly bad.
>> [ 6.455861] udlfb: Reallocating framebuffer. Addresses will change!
>> [ 6.531120] ------------[ cut here ]------------
>> [ 6.532810] WARNING: at lib/dma-debug.c:875 check_for_stack+0xad/0xf0()
>> [ 6.532810] Hardware name: MS-7640
>> [ 6.532810] ehci_hcd 0000:07:01.2: DMA-API: device driver maps memory fromstack [addr=ffff880023321960]
> Ah, that one reminds of the USB floppy bug. Not a big problem but annoying.
>> [ 6.532810] Modules linked in:
>> [ 6.532810] Pid: 563, comm: khubd Tainted: G D 3.0.0-xen-3.1-konrad-master-20110722+ #1
>> [ 6.532810] Call Trace:
>> [ 6.532810] [<ffffffff8105180f>] warn_slowpath_common+0x7f/0xc0
>> [ 6.532810] [<ffffffff81051906>] warn_slowpath_fmt+0x46/0x50
>> [ 6.532810] [<ffffffff813517dd>] check_for_stack+0xad/0xf0
>> [ 6.532810] [<ffffffff81353389>] debug_dma_map_page+0x179/0x1e0
>> [ 6.532810] [<ffffffff814e9a0c>] usb_hcd_map_urb_for_dma+0x5ec/0x6a0
>> [ 6.532810] [<ffffffff814e9c6e>] usb_hcd_submit_urb+0x14e/0x780
>> [ 6.532810] [<ffffffff8110d360>] ? __vmalloc_node_range+0x140/0x1e0
>> [ 6.532810] [<ffffffff813a5e02>] ? dlfb_setup_modes+0x512/0x580
>> [ 6.532810] [<ffffffff814eb365>] usb_submit_urb+0xe5/0x2b0
>> [ 6.532810] [<ffffffff814ecae3>] usb_start_wait_urb+0x63/0x100
>> [ 6.532810] [<ffffffff814eba18>] ? usb_init_urb+0x28/0x40
>> [ 6.532810] [<ffffffff814ecdc8>] usb_control_msg+0xe8/0x120
>> [ 6.532810] [<ffffffff813a7b11>] dlfb_usb_probe+0x441/0x850
>> [ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
>> [ 6.532810] [<ffffffff814eee66>] usb_probe_interface+0x106/0x1c0
>> [ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
>> [ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
>> [ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
>> [ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
>> [ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
>> [ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
>> [ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
>> [ 6.532810] [<ffffffff814edd4e>] usb_set_configuration+0x45e/0x690
>> [ 6.532810] [<ffffffff811917ea>] ? sysfs_do_create_link+0xfa/0x220
>> [ 6.532810] [<ffffffff814f6914>] generic_probe+0x44/0xa0
>> [ 6.532810] [<ffffffff814ee1da>] usb_probe_device+0x1a/0x20
>> [ 6.532810] [<ffffffff81426256>] driver_probe_device+0x96/0x1c0
>> [ 6.532810] [<ffffffff81426420>] ? __driver_attach+0xa0/0xa0
>> [ 6.532810] [<ffffffff81426473>] __device_attach+0x53/0x60
>> [ 6.532810] [<ffffffff81425538>] bus_for_each_drv+0x68/0x90
>> [ 6.532810] [<ffffffff81426557>] device_attach+0xa7/0xc0
>> [ 6.532810] [<ffffffff8142530d>] bus_probe_device+0x2d/0x50
>> [ 6.532810] [<ffffffff81423f19>] device_add+0x5f9/0x6d0
>> [ 6.532810] [<ffffffff814ed8d9>] ? usb_cache_string+0x99/0xb0
>> [ 6.532810] [<ffffffff814e5a27>] usb_new_device+0x167/0x1f0
>> [ 6.532810] [<ffffffff814e72f8>] hub_thread+0xba8/0x1330
>> [ 6.532810] [<ffffffff8176331f>] ? schedule+0x42f/0xa70
>> [ 6.532810] [<ffffffff81074e20>] ? wake_up_bit+0x40/0x40
>> [ 6.532810] [<ffffffff81765ed9>] ? _raw_spin_unlock_irqrestore+0x69/0x80
>> [ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
>> [ 6.532810] [<ffffffff814e6750>] ? hub_probe+0x850/0x850
>> [ 6.532810] [<ffffffff810748d6>] kthread+0x96/0xa0
>> [ 6.532810] [<ffffffff81767a64>] kernel_thread_helper+0x4/0x10
>> [ 6.532810] [<ffffffff81766341>] ? retint_restore_args+0x13/0x13
>> [ 6.532810] [<ffffffff81767a60>] ? gs_change+0x13/0x13
>> [ 6.532810] ---[ end trace 09caa95ef959351a ]---
>>
>>
>>
>>
>> [ 29.224385] em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3)
>> [ 29.233168] BUG: unable to handle kernel paging request at ffff880020221000
>> [ 29.236056] IP: [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
> And this is even worst..
>> [ 29.244097] PGD 1a4e067 PUD 1a52067 PMD 2ff67067 PTE 8010000020221064
>> [ 29.244097] Oops: 0002 [#3] SMP DEBUG_PAGEALLOC
>> [ 29.256140] CPU 5
>> [ 29.256140] Modules linked in:
>> [ 29.256140]
>> [ 29.256140] Pid: 1785, comm: modprobe Tainted: G D W 3.0.0-xen-3.1-konrad-master-20110722+ #1 MSI MS-7640/890F
>> XA-GD70 (MS-7640)
>> [ 29.256140] RIP: e030:[<ffffffff8110016e>] [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
>> [ 29.256140] RSP: e02b:ffff88002024fc38 EFLAGS: 00010286
>> [ 29.256140] RAX: 0000000000000000 RBX: ffff88002024fd98 RCX: ffff880020221000
>> [ 29.256140] RDX: ffff880020221000 RSI: ffff88002f0f8000 RDI: 0000000000000000
>> [ 29.256140] RBP: ffff88002024fc48 R08: 00003ffffffff000 R09: ffff880000000000
>> [ 29.256140] R10: 0000000000000000 R11: ffffffff81af32d0 R12: 0000000000407000
>> [ 29.256140] R13: ffff88002876c3c8 R14: ffff88002024fd48 R15: ffff8800200c4680
>> [ 29.256140] FS: 00007f3469119700(0000) GS:ffff88002f0a8000(0000) knlGS:0000000000000000
>> [ 29.256140] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
>> [ 29.256140] CR2: ffff880020221000 CR3: 0000000001a4d000 CR4: 0000000000000660
>> [ 29.256140] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 29.256140] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>> [ 29.256140] Process modprobe (pid: 1785, threadinfo ffff88002024e000, task ffff880023318000)
>> [ 29.256140] Stack:
>> [ 29.256140] 0000000000000006 ffff8800201c7038 ffff88002024fd88 ffffffff8110086d
>> [ 29.256140] ffffffff810080f2 0000000000000246 0000000000000000 0000000000000000
>> [ 29.256140] ffffffff81afcce8 ffff88002024fe00 0000000000000000 ffff8800200c4680
>> [ 29.256140] Call Trace:
>> [ 29.256140] [<ffffffff8110086d>] unmap_vmas+0x60d/0x9f0
>> [ 29.256140] [<ffffffff810080f2>] ? check_events+0x12/0x20
>> [ 29.256140] [<ffffffff81103a84>] exit_mmap+0xa4/0x150
>> [ 29.256140] [<ffffffff8104f41f>] mmput+0x4f/0xe0
>> [ 29.256140] [<ffffffff81053e01>] exit_mm+0x131/0x170
>> [ 29.256140] [<ffffffff81055c04>] do_exit+0x174/0x860
>> [ 29.256140] [<ffffffff8111ba30>] ? kmem_cache_free+0x20/0x130
>> [ 29.256140] [<ffffffff81056345>] do_group_exit+0x55/0xf0
>> [ 29.256140] [<ffffffff810563f7>] sys_exit_group+0x17/0x20
>> [ 29.256140] [<ffffffff81766c42>] system_call_fastpath+0x16/0x1b
>> [ 29.256140] Code: e8 68 f2 00 00 48 83 c4 08 b8 01 00 00 00 5b c9 c3 0f 1f 40 00 31 f6 bf 00 02 00 00 e8 cc 26 fe ff
>> 48 89 c1 31 c0 48 85 c9 74 a2
>> [ 29.256140] c7 01 00 00 00 00 c7 41 08 00 00 00 00 c7 41 0c fe 01 00 00
>> [ 29.256140] RIP [<ffffffff8110016e>] __tlb_remove_page+0x9e/0xc0
>> [ 29.256140] RSP <ffff88002024fc38>
>> [ 29.256140] CR2: ffff880020221000
>> [ 29.256140] ---[ end trace 09caa95ef959351b ]---
>> [ 29.256140] Fixing recursive fault but reboot is needed!
>>
>> \ // _ \ '_ \ || |_ | | | |
>> \ __/ | | | | _|| |_| |
>> /\_\___|_| |_| _|(_)_(_)_|
>>
>> (XENXen version 4.1.(root@dyndns.org(gcc version 4.4 (Debian 4.4.5-8) Thu Jun 16 11::46 CEST 2011
>> (N) Latest Changet: Tue Jun 14 142:48 2011 +0100 079:73a8061b01f1(XEN) BootloaderGRUB 1.98+201008-14
>> (XEN) Comma line: dom0_mem=8M loglvl=all lovl_guest=all conle_timestamps vga=gfx-1280x1024x3cpuidle cpufreq=n noreboot d
>> ebugapic=debug apic_rbosity=debug ap=debug acpi_enfoe_resources=lax mmu=on,amd-iommuebug amd_iommu=oamd-iommu-debug m1=1
>> 15200,8n1 coole=vga,com1
> <blinks>
> dom0_mem=8M? Ah looks like your serial console is being eaten up. N/m then.
yes unfortunately that happens, haven't figured out why ...
[-- Attachment #2: dotconfig --]
[-- Type: application/octet-stream, Size: 79904 bytes --]
#
# Automatically generated make config: don't edit
# Linux/x86_64 3.0.0 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-xen-3.1-konrad-master-20110722"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_XEN_DEBUG is not set
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=y
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
# CONFIG_NETFILTER_XT_SET is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
# CONFIG_IP_NF_TARGET_NETMAP is not set
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=y
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_ULOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_F71808E_WDT=y
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_XEN_WDT=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_RC_CORE=y
CONFIG_LIRC=y
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_LIRC_CODEC=y
# CONFIG_IR_ENE is not set
# CONFIG_IR_IMON is not set
# CONFIG_IR_MCEUSB is not set
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
# CONFIG_IR_WINBOND_CIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
#
# RDS decoders
#
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP5150=y
#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
#
# Camera sensor devices
#
CONFIG_VIDEO_MT9V011=y
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_TIMBERDALE is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_ALSA=y
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_UDL=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
CONFIG_SND_OPL3_LIB_SEQ=y
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_XEN_PLATFORM_PCI=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_SIGMA is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 82927 bytes --]
00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11] (rev 02)
Subsystem: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part [1002:5a11]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=20 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 3.00
Link Frequency 0: [b]
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-
Address: 00000000 Data: 0000
00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device [1002:5a23]
Subsystem: ATI Technologies Inc Device [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Capabilities: [40] Secure device <?>
Capabilities: [54] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4128
Capabilities: [64] HyperTransport: MSI Mapping Enable+ Fixed+
00:02.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 41c0
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port C) [1002:5a17] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9f00000-f9ffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 11.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 41c8
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9e00000-f9efffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 41d0
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9d00000-f9dfffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 41d8
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9c00000-f9cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4121
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (NB-SB link) [1002:5a1f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9b00000-f9bfffff
Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #5, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4129
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port B) [1002:5a1e] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9a00000-f9afffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <8us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #4, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee3f00c Data: 4131
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:5a11]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [190 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans+
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1750
Region 0: I/O ports at 7000 [size=8]
Region 1: I/O ports at 6000 [size=4]
Region 2: I/O ports at 5000 [size=8]
Region 3: I/O ports at 3000 [size=4]
Region 4: I/O ports at 2000 [size=16]
Region 5: Memory at f98ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+
Address: 00000000fee0200c Data: 41b9
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f98fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f98ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f98fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f98ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 00 [Normal decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f98fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #32, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee3f00c Data: 4139
Capabilities: [b0] Subsystem: ATI Technologies Inc Device [1002:0000]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pcieport
00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f98fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f98ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: [b]
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
04:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f9af8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pciback
04:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f9af9000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f9afa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 41
Region 0: Memory at f9afb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 42
Region 0: Memory at f9afc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 42
Region 0: Memory at f9afd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 43
Region 0: Memory at f9afe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
04:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 43
Region 0: Memory at f9aff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE [Radeon HD 3450] [1002:95c5] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01d4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 32
Region 0: Memory at b0000000 (64-bit, prefetchable) [disabled] [size=256M]
Region 2: Memory at f9be0000 (64-bit, non-prefetchable) [disabled] [size=64K]
Region 4: I/O ports at b000 [disabled] [size=256]
Expansion ROM at f9bc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pciback
05:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa28]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 33
Region 0: Memory at f9bfc000 (64-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: pciback
06:00.0 PCI bridge [0604]: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge [104c:8231] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f9c00000-f9cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000]
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
07:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f9c00000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
07:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 45
Region 0: Memory at f9c01000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
07:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 46
Region 0: Memory at f9c02000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pciback
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1748
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at cfeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9de0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0200c Data: 41d1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7640]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1749
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at cffff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at cfff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9ee0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0800c Data: 41c1
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 04-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
0a:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f9ff8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pciback
0a:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f9ff9000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 30
Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 30
Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 10 [OHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 31
Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0a:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4â€Port USB 2.0 Host Controller [9710:9990] (prog-if 20 [EHCI])
Subsystem: Device [a000:4000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 31
Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: pciback
0b:00.0 VGA compatible controller [0300]: nVidia Corporation G98 [GeForce 8400 GS] [10de:06e4] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8266]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at e800 [size=128]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
[-- Attachment #4: lsusb.txt --]
[-- Type: text/plain, Size: 19048 bytes --]
Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc517 LX710 Cordless Desktop Laser
bcdDevice 38.10
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 177
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:16.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:16.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:14.5
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:13.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:13.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:12.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:12.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 5
wHubCharacteristic 0x0012
No power switching (usb 1.0)
No overcurrent protection
bPwrOn2PwrGood 2 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Re: Warn/panics booting Konrad's master tree under xen 4.1.1
2011-07-25 15:04 ` Sander Eikelenboom
@ 2011-07-26 21:03 ` Konrad Rzeszutek Wilk
0 siblings, 0 replies; 4+ messages in thread
From: Konrad Rzeszutek Wilk @ 2011-07-26 21:03 UTC (permalink / raw)
To: Sander Eikelenboom; +Cc: xen-devel
On Mon, Jul 25, 2011 at 05:04:49PM +0200, Sander Eikelenboom wrote:
> Monday, July 25, 2011, 4:44:38 PM, you wrote:
>
> > On Sat, Jul 23, 2011 at 09:40:10PM +0200, Sander Eikelenboom wrote:
> >> Hi Konrad,
>
> > Hey Sander,
> >>
> >> I have tried your current master tree (commit 602d7a606974c54dc8bd61527c051d7d697a5f86) as domU (under xen 4.1.1 and a 2.6.32.35 dom0), that seems to work fine.
> >>
>
> > Great..
>
> Yes, and i hope your 3 times retry with swiotbl will also help for the observed problems with allocating dma mem after some time.
>
> >> I have tried to use the same kernel as dom0 as well, but i get the warns/panic below, when i boot the kernel bare metal it works ok.
>
> > OK, so only as Dom0 you get this.
>
> Yes.
>
> >> Complete serial log is attached, i have re-compiled with and without pv-spinlocks but there is no difference.
> >>
> >> Also xen-pciback compiled in, with xen-pciback.hide as kernel boot parameter doesn't seem to seize the devices.
>
> > Can you attach the .config file please? And the lspci/lsusb for your Pinnacle capture thingy.
> > You have been doing the USB passthrough for some time right - is this a new piece of hardware
> > or was it the one you used for some time?
>
> .config of the 3.0+ kernel attached
> lspci and lsusb attached (from booting with 2.6.32.35 kernel, (since the 3.0+ kernel panics on boot), so you don't see the usb devices in the lsusb, since pass through of the usb cards works in this case)
Ok.
>
> The pinnacle and kworld usb video capture devices (both em28xx based) should have been passedthrough, and i'm using them for quite some time, so no they are not new.
> I do have the xen-pciback lines in grub (exactly the same as for the 2.6.32.35 kernel, except for the xen-pciback.passthrough=passthrough parameter because with 2.6.32.35 you specify it at compile time ), but it seems no device gets seized by pciback some how.
You just need to say xen-pciback.passthrough=true
or xen-pciback.passthrough=1
The not seizing devices is not good.. Weird it works for me. Let me double check just to make sure.
And I believe I've the kworld usb video capture device so I should be able to reproduce this.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-07-26 21:03 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-23 19:40 Warn/panics booting Konrad's master tree under xen 4.1.1 Sander Eikelenboom
2011-07-25 14:44 ` Konrad Rzeszutek Wilk
2011-07-25 15:04 ` Sander Eikelenboom
2011-07-26 21:03 ` Konrad Rzeszutek Wilk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.