* [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code @ 2011-09-05 9:43 Wolfgang Denk 2011-09-05 9:50 ` Stefan Roese 2011-09-05 10:24 ` Sergei Shtylyov 0 siblings, 2 replies; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 9:43 UTC (permalink / raw) To: u-boot The ALPR custom FPGA code was missed by commit e6a857d "fpga: constify to fix build warning" resulting in such warnings: fpga.c:226: warning: initialization from incompatible pointer type Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> --- board/prodrive/alpr/fpga.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c index 93f2449..3666a9a 100644 --- a/board/prodrive/alpr/fpga.c +++ b/board/prodrive/alpr/fpga.c @@ -168,7 +168,7 @@ int fpga_done_fn (int cookie) /* writes the complete buffer to the FPGA writing the complete buffer in one function is much faster, then calling it for every bit */ -int fpga_write_fn (void *buf, size_t len, int flush, int cookie) +int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) { size_t bytecount = 0; unsigned char *data = (unsigned char *) buf; -- 1.7.6 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code 2011-09-05 9:43 [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code Wolfgang Denk @ 2011-09-05 9:50 ` Stefan Roese 2011-09-05 10:25 ` Wolfgang Denk 2011-09-05 10:24 ` Sergei Shtylyov 1 sibling, 1 reply; 9+ messages in thread From: Stefan Roese @ 2011-09-05 9:50 UTC (permalink / raw) To: u-boot Hi Wolfgang, On Monday 05 September 2011 11:43:29 Wolfgang Denk wrote: > The ALPR custom FPGA code was missed by commit e6a857d "fpga: > constify to fix build warning" resulting in such warnings: > > fpga.c:226: warning: initialization from incompatible pointer type > > Signed-off-by: Wolfgang Denk <wd@denx.de> > Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de> Wolfgang, please feel free to pull this directly if you prefer. Thanks. Best regards, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code 2011-09-05 9:50 ` Stefan Roese @ 2011-09-05 10:25 ` Wolfgang Denk 0 siblings, 0 replies; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 10:25 UTC (permalink / raw) To: u-boot Dear Stefan Roese, In message <201109051150.46853.sr@denx.de> you wrote: > > Acked-by: Stefan Roese <sr@denx.de> Thanks. > Wolfgang, please feel free to pull this directly if you prefer. Will do, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Either one of us, by himself, is expendable. Both of us are not. -- Kirk, "The Devil in the Dark", stardate 3196.1 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code 2011-09-05 9:43 [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code Wolfgang Denk 2011-09-05 9:50 ` Stefan Roese @ 2011-09-05 10:24 ` Sergei Shtylyov 2011-09-05 10:31 ` Wolfgang Denk 2011-09-05 10:54 ` [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup Wolfgang Denk 1 sibling, 2 replies; 9+ messages in thread From: Sergei Shtylyov @ 2011-09-05 10:24 UTC (permalink / raw) To: u-boot Hello. On 05-09-2011 13:43, Wolfgang Denk wrote: > The ALPR custom FPGA code was missed by commit e6a857d "fpga: > constify to fix build warning" resulting in such warnings: > fpga.c:226: warning: initialization from incompatible pointer type > Signed-off-by: Wolfgang Denk<wd@denx.de> > Cc: Stefan Roese<sr@denx.de> > --- > board/prodrive/alpr/fpga.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c > index 93f2449..3666a9a 100644 > --- a/board/prodrive/alpr/fpga.c > +++ b/board/prodrive/alpr/fpga.c > @@ -168,7 +168,7 @@ int fpga_done_fn (int cookie) > /* writes the complete buffer to the FPGA > writing the complete buffer in one function is much faster, > then calling it for every bit */ > -int fpga_write_fn (void *buf, size_t len, int flush, int cookie) > +int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) I guess this causes checkpatch.pl to complain due to space before (... WBR, Sergei ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code 2011-09-05 10:24 ` Sergei Shtylyov @ 2011-09-05 10:31 ` Wolfgang Denk 2011-09-05 10:54 ` [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup Wolfgang Denk 1 sibling, 0 replies; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 10:31 UTC (permalink / raw) To: u-boot Dear Sergei Shtylyov, In message <4E64A372.8030506@mvista.com> you wrote: > > > -int fpga_write_fn (void *buf, size_t len, int flush, int cookie) > > +int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) > > I guess this causes checkpatch.pl to complain due to space before (... Right. I'll send a separate cleanup patch later. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Der Irrtum wiederholt sich immerfort in der Tat. Deshalb mu? man das Wahre unerm?dlich in Worten wiederholen. - Goethe ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup 2011-09-05 10:24 ` Sergei Shtylyov 2011-09-05 10:31 ` Wolfgang Denk @ 2011-09-05 10:54 ` Wolfgang Denk 2011-09-05 11:34 ` [U-Boot] [PATCH v2] " Wolfgang Denk 1 sibling, 1 reply; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 10:54 UTC (permalink / raw) To: u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> --- No functional changes, only coding style cleanup. board/prodrive/alpr/fpga.c | 68 ++++++++++++++++++++++--------------------- 1 files changed, 35 insertions(+), 33 deletions(-) diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c index 3666a9a..1778688 100644 --- a/board/prodrive/alpr/fpga.c +++ b/board/prodrive/alpr/fpga.c @@ -39,9 +39,9 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_FPGA) #ifdef FPGA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) +#define PRINTF(fmt, args...) printf(fmt , ##args) #else -#define PRINTF(fmt,args...) +#define PRINTF(fmt, args...) #endif static unsigned long regval; @@ -69,19 +69,21 @@ static unsigned long regval; #define SET_FPGA(data) out32(GPIO0_OR, data) -#define FPGA_WRITE_1 { \ - SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ +#define FPGA_WRITE_1 { \ + SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA); /* set data to 1 */ \ +} -#define FPGA_WRITE_0 { \ - SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */ +#define FPGA_WRITE_0 { \ + SET_FPGA(OLD_VAL | 0 | 0); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | 0); /* set data to 1 */ \ +} /* Plattforminitializations */ /* Here we have to set the FPGA Chain */ /* PROGRAM_PROG_EN = HIGH */ /* PROGRAM_SEL_DPR = LOW */ -int fpga_pre_fn (int cookie) +int fpga_pre_fn(int cookie) { unsigned long reg; @@ -128,23 +130,23 @@ int fpga_pre_fn (int cookie) } /* Set the state of CONFIG Pin */ -int fpga_config_fn (int assert_config, int flush, int cookie) +int fpga_config_fn(int assert_config, int flush, int cookie) { - if (assert_config) { + if (assert_config) SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG); - } else { + else SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG); - } + return FPGA_SUCCESS; } /* Returns the state of STATUS Pin */ -int fpga_status_fn (int cookie) +int fpga_status_fn(int cookie) { unsigned long reg; reg = in32(GPIO0_IR); - if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) { + if (reg & (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) { PRINTF("STATUS = HIGH\n"); return FPGA_FAIL; } @@ -153,11 +155,11 @@ int fpga_status_fn (int cookie) } /* Returns the state of CONF_DONE Pin */ -int fpga_done_fn (int cookie) +int fpga_done_fn(int cookie) { unsigned long reg; reg = in32(GPIO0_IR); - if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) { + if (reg & (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) { PRINTF("CONF_DON = HIGH\n"); return FPGA_FAIL; } @@ -168,11 +170,11 @@ int fpga_done_fn (int cookie) /* writes the complete buffer to the FPGA writing the complete buffer in one function is much faster, then calling it for every bit */ -int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) +int fpga_write_fn(const void *buf, size_t len, int flush, int cookie) { size_t bytecount = 0; unsigned char *data = (unsigned char *) buf; - unsigned char val=0; + unsigned char val = 0; int i; int len_40 = len / 40; @@ -180,20 +182,20 @@ int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) val = data[bytecount++]; i = 8; do { - if (val & 0x01) { + if (val & 0x01) FPGA_WRITE_1; - } else { + else FPGA_WRITE_0; - } + val >>= 1; - i --; + i--; } while (i > 0); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK if (bytecount % len_40 == 0) { - putc ('.'); /* let them know we are alive */ + putc('.'); /* let them know we are alive */ #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC - if (ctrlc ()) + if (ctrlc()) return FPGA_FAIL; #endif } @@ -203,16 +205,16 @@ int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) } /* called, when programming is aborted */ -int fpga_abort_fn (int cookie) +int fpga_abort_fn(int cookie) { SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR)); return FPGA_SUCCESS; } /* called, when programming was succesful */ -int fpga_post_fn (int cookie) +int fpga_post_fn(int cookie) { - return fpga_abort_fn (cookie); + return fpga_abort_fn(cookie); } /* Note that these are pointers to code that is in Flash. They will be @@ -240,16 +242,16 @@ Altera_desc fpga[CONFIG_FPGA_COUNT] = { /* * Initialize the fpga. Return 1 on success, 0 on failure. */ -int alpr_fpga_init (void) +int alpr_fpga_init(void) { int i; - PRINTF ("%s:%d: Initialize FPGA interface\n", __FUNCTION__, __LINE__); - fpga_init (); + PRINTF("%s:%d: Initialize FPGA interface\n", __func__, __LINE__); + fpga_init(); for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i); - fpga_add (fpga_altera, &fpga[i]); + PRINTF("%s:%d: Adding fpga %d\n", __func__, __LINE__, i); + fpga_add(fpga_altera, &fpga[i]); } return 1; } -- 1.7.6 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup 2011-09-05 10:54 ` [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup Wolfgang Denk @ 2011-09-05 11:34 ` Wolfgang Denk 2011-09-05 12:00 ` Stefan Roese 2011-09-05 13:47 ` Wolfgang Denk 0 siblings, 2 replies; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 11:34 UTC (permalink / raw) To: u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> --- v2: fix compile issues; must use "do {} while (0)" in macros definitions if we want to omit the braces in if...else statements. Should have done this anyway. board/prodrive/alpr/fpga.c | 76 ++++++++++++++++++++++--------------------- 1 files changed, 39 insertions(+), 37 deletions(-) diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c index 3666a9a..e7686ad 100644 --- a/board/prodrive/alpr/fpga.c +++ b/board/prodrive/alpr/fpga.c @@ -39,24 +39,24 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_FPGA) #ifdef FPGA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) +#define PRINTF(fmt, args...) printf(fmt , ##args) #else -#define PRINTF(fmt,args...) +#define PRINTF(fmt, args...) #endif static unsigned long regval; -#define SET_GPIO_REG_0(reg, bit) { \ +#define SET_GPIO_REG_0(reg, bit) do { \ regval = in32(reg); \ regval &= ~(0x80000000 >> bit); \ out32(reg, regval); \ - } + } while (0) -#define SET_GPIO_REG_1(reg, bit) { \ +#define SET_GPIO_REG_1(reg, bit) do { \ regval = in32(reg); \ regval |= (0x80000000 >> bit); \ out32(reg, regval); \ - } + } while (0) #define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) #define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) @@ -69,19 +69,21 @@ static unsigned long regval; #define SET_FPGA(data) out32(GPIO0_OR, data) -#define FPGA_WRITE_1 { \ - SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ +#define FPGA_WRITE_1 do { \ + SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA); /* set data to 1 */ \ +} while (0) -#define FPGA_WRITE_0 { \ - SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \ - SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */ +#define FPGA_WRITE_0 do { \ + SET_FPGA(OLD_VAL | 0 | 0); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | 0); /* set data to 1 */ \ +} while (0) /* Plattforminitializations */ /* Here we have to set the FPGA Chain */ /* PROGRAM_PROG_EN = HIGH */ /* PROGRAM_SEL_DPR = LOW */ -int fpga_pre_fn (int cookie) +int fpga_pre_fn(int cookie) { unsigned long reg; @@ -128,23 +130,23 @@ int fpga_pre_fn (int cookie) } /* Set the state of CONFIG Pin */ -int fpga_config_fn (int assert_config, int flush, int cookie) +int fpga_config_fn(int assert_config, int flush, int cookie) { - if (assert_config) { + if (assert_config) SET_GPIO_1(CONFIG_SYS_GPIO_CONFIG); - } else { + else SET_GPIO_0(CONFIG_SYS_GPIO_CONFIG); - } + return FPGA_SUCCESS; } /* Returns the state of STATUS Pin */ -int fpga_status_fn (int cookie) +int fpga_status_fn(int cookie) { unsigned long reg; reg = in32(GPIO0_IR); - if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) { + if (reg & (0x80000000 >> CONFIG_SYS_GPIO_STATUS)) { PRINTF("STATUS = HIGH\n"); return FPGA_FAIL; } @@ -153,11 +155,11 @@ int fpga_status_fn (int cookie) } /* Returns the state of CONF_DONE Pin */ -int fpga_done_fn (int cookie) +int fpga_done_fn(int cookie) { unsigned long reg; reg = in32(GPIO0_IR); - if (reg &= (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) { + if (reg & (0x80000000 >> CONFIG_SYS_GPIO_CON_DON)) { PRINTF("CONF_DON = HIGH\n"); return FPGA_FAIL; } @@ -168,11 +170,11 @@ int fpga_done_fn (int cookie) /* writes the complete buffer to the FPGA writing the complete buffer in one function is much faster, then calling it for every bit */ -int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) +int fpga_write_fn(const void *buf, size_t len, int flush, int cookie) { size_t bytecount = 0; unsigned char *data = (unsigned char *) buf; - unsigned char val=0; + unsigned char val = 0; int i; int len_40 = len / 40; @@ -180,20 +182,20 @@ int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) val = data[bytecount++]; i = 8; do { - if (val & 0x01) { + if (val & 0x01) FPGA_WRITE_1; - } else { + else FPGA_WRITE_0; - } + val >>= 1; - i --; + i--; } while (i > 0); #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK if (bytecount % len_40 == 0) { - putc ('.'); /* let them know we are alive */ + putc('.'); /* let them know we are alive */ #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC - if (ctrlc ()) + if (ctrlc()) return FPGA_FAIL; #endif } @@ -203,16 +205,16 @@ int fpga_write_fn (const void *buf, size_t len, int flush, int cookie) } /* called, when programming is aborted */ -int fpga_abort_fn (int cookie) +int fpga_abort_fn(int cookie) { SET_GPIO_1((CONFIG_SYS_GPIO_SEL_DPR)); return FPGA_SUCCESS; } /* called, when programming was succesful */ -int fpga_post_fn (int cookie) +int fpga_post_fn(int cookie) { - return fpga_abort_fn (cookie); + return fpga_abort_fn(cookie); } /* Note that these are pointers to code that is in Flash. They will be @@ -240,16 +242,16 @@ Altera_desc fpga[CONFIG_FPGA_COUNT] = { /* * Initialize the fpga. Return 1 on success, 0 on failure. */ -int alpr_fpga_init (void) +int alpr_fpga_init(void) { int i; - PRINTF ("%s:%d: Initialize FPGA interface\n", __FUNCTION__, __LINE__); - fpga_init (); + PRINTF("%s:%d: Initialize FPGA interface\n", __func__, __LINE__); + fpga_init(); for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i); - fpga_add (fpga_altera, &fpga[i]); + PRINTF("%s:%d: Adding fpga %d\n", __func__, __LINE__, i); + fpga_add(fpga_altera, &fpga[i]); } return 1; } -- 1.7.6 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup 2011-09-05 11:34 ` [U-Boot] [PATCH v2] " Wolfgang Denk @ 2011-09-05 12:00 ` Stefan Roese 2011-09-05 13:47 ` Wolfgang Denk 1 sibling, 0 replies; 9+ messages in thread From: Stefan Roese @ 2011-09-05 12:00 UTC (permalink / raw) To: u-boot On Monday 05 September 2011 13:34:39 Wolfgang Denk wrote: > Signed-off-by: Wolfgang Denk <wd@denx.de> > Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de> Again, please apply directly if you prefer. Thanks. Best regards, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de ^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup 2011-09-05 11:34 ` [U-Boot] [PATCH v2] " Wolfgang Denk 2011-09-05 12:00 ` Stefan Roese @ 2011-09-05 13:47 ` Wolfgang Denk 1 sibling, 0 replies; 9+ messages in thread From: Wolfgang Denk @ 2011-09-05 13:47 UTC (permalink / raw) To: u-boot Dear Wolfgang Denk, In message <1315222479-23960-1-git-send-email-wd@denx.de> you wrote: > Signed-off-by: Wolfgang Denk <wd@denx.de> > Cc: Stefan Roese <sr@denx.de> > --- > v2: fix compile issues; must use "do {} while (0)" in macros > definitions if we want to omit the braces in if...else statements. > Should have done this anyway. > > board/prodrive/alpr/fpga.c | 76 ++++++++++++++++++++++--------------------- > 1 files changed, 39 insertions(+), 37 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de In general, they do what you want, unless you want consistency. - Larry Wall in the perl man page ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2011-09-05 13:47 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-09-05 9:43 [U-Boot] [PATCH] PPC4xx: ALPR: constify FPGA code Wolfgang Denk 2011-09-05 9:50 ` Stefan Roese 2011-09-05 10:25 ` Wolfgang Denk 2011-09-05 10:24 ` Sergei Shtylyov 2011-09-05 10:31 ` Wolfgang Denk 2011-09-05 10:54 ` [U-Boot] [PATCH] [COSMETIC] board/prodrive/alpr/fpga.c: Coding style cleanup Wolfgang Denk 2011-09-05 11:34 ` [U-Boot] [PATCH v2] " Wolfgang Denk 2011-09-05 12:00 ` Stefan Roese 2011-09-05 13:47 ` Wolfgang Denk
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.