From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/6] i.mx: Add the initial support for freescale i.MX6Q processor
Date: Mon, 14 Nov 2011 00:11:55 +0100 [thread overview]
Message-ID: <201111140011.55220.marek.vasut@gmail.com> (raw)
In-Reply-To: <1321094190-8108-3-git-send-email-jason.hui@linaro.org>
> i.MX6Q is freescale quad core processors with ARM cortex_a9 complex.
> This patch is to add the initial support for this processor.
>
> Signed-off-by: Jason Liu <jason.hui@linaro.org>
> ---
> arch/arm/cpu/armv7/mx6/Makefile | 48 +
> arch/arm/cpu/armv7/mx6/clock.c | 388 +++++++
> arch/arm/cpu/armv7/mx6/iomux-v3.c | 76 ++
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 60 +
> arch/arm/cpu/armv7/mx6/soc.c | 57 +
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++++++
> arch/arm/include/asm/arch-mx6/clock.h | 50 +
> arch/arm/include/asm/arch-mx6/gpio.h | 35 +
> arch/arm/include/asm/arch-mx6/imx-regs.h | 233 ++++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 104 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683
> +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/sys_proto.h |
> 38 +
> 12 files changed, 3666 insertions(+), 0 deletions(-)
>
[...]
> diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S
> b/arch/arm/cpu/armv7/mx6/lowlevel_init.S new file mode 100644
> index 0000000..7a03f59
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S
> @@ -0,0 +1,60 @@
> +/*
> + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +#include <asm/arch/imx-regs.h>
> +
> +/*
> + * AIPS setup - Only setup MPROTx registers.
> + * Set all MPROTx to be non-bufferable,
> + * trusted for R/W, not forced to user-mode.
> + * The PACR default values are good.
> + */
> +.macro init_aips
> + ldr r0, =AIPS1_ON_BASE_ADDR
> + ldr r1, =0x77777777
> + str r1, [r0, #0x0]
> + str r1, [r0, #0x4]
> + ldr r1, =0x0
> + str r1, [r0, #0x40]
> + str r1, [r0, #0x44]
> + str r1, [r0, #0x48]
> + str r1, [r0, #0x4C]
> + str r1, [r0, #0x50]
> +
> + ldr r0, =AIPS2_ON_BASE_ADDR
> + ldr r1, =0x77777777
> + str r1, [r0, #0x0]
> + str r1, [r0, #0x4]
> + ldr r1, =0x0
> + str r1, [r0, #0x40]
> + str r1, [r0, #0x44]
> + str r1, [r0, #0x48]
> + str r1, [r0, #0x4C]
> + str r1, [r0, #0x50]
> +.endm /* init_aips */
Can't this be done in C code? Why the assembly ?
> +
> +.section ".text.init", "x"
> +
> +.globl lowlevel_init
> +lowlevel_init:
> +
> + init_aips
> +
> + mov pc, lr
[...]
> +#define MXC_CCM_CSCMR2_CAN_CLK_SEL_OFFSET (2)
Drop parenthesis around stuff similar to this.
> +#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
> diff --git a/arch/arm/include/asm/arch-mx6/clock.h
> b/arch/arm/include/asm/arch-mx6/clock.h new file mode 100644
> index 0000000..636458f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx6/clock.h
> @@ -0,0 +1,50 @@
> +/*
> + * (C) Copyright 2009
> + * Stefano Babic, DENX Software Engineering, sbabic at denx.de.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __ASM_ARCH_CLOCK_H
> +#define __ASM_ARCH_CLOCK_H
> +
> +enum mxc_clock {
> + MXC_ARM_CLK = 0,
> + MXC_PER_CLK,
> + MXC_AHB_CLK,
> + MXC_IPG_CLK,
> + MXC_IPG_PERCLK,
> + MXC_UART_CLK,
> + MXC_CSPI_CLK,
> + MXC_AXI_CLK,
> + MXC_EMI_SLOW_CLK,
> + MXC_DDR_CLK,
> + MXC_ESDHC_CLK,
> + MXC_ESDHC2_CLK,
> + MXC_ESDHC3_CLK,
> + MXC_ESDHC4_CLK,
> + MXC_SATA_CLK,
> + MXC_NFC_CLK,
> +};
> +
> +u32 imx_get_uartclk(void);
> +u32 imx_get_fecclk(void);
> +unsigned int mxc_get_clock(enum mxc_clock clk);
> +
> +#endif /* __ASM_ARCH_CLOCK_H */
> diff --git a/arch/arm/include/asm/arch-mx6/gpio.h
> b/arch/arm/include/asm/arch-mx6/gpio.h new file mode 100644
> index 0000000..1dc34e9
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx6/gpio.h
> @@ -0,0 +1,35 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +
> +#ifndef __ASM_ARCH_MX5_GPIO_H
> +#define __ASM_ARCH_MX5_GPIO_H
> +
> +/* GPIO registers */
> +struct gpio_regs {
> + u32 gpio_dr;
> + u32 gpio_dir;
> + u32 gpio_psr;
> +};
> +
You'll have GPIO driver, so why expose this structure ?
> +#endif
M
next prev parent reply other threads:[~2011-11-13 23:11 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-12 10:36 [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 1/6] i.mx: i.mx5: Move some files to imx-common folder Jason Liu
2011-11-14 8:34 ` Stefano Babic
2011-11-14 8:57 ` Jason Hui
2011-11-14 11:28 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 2/6] i.mx: Add the initial support for freescale i.MX6Q processor Jason Liu
2011-11-13 23:11 ` Marek Vasut [this message]
2011-11-14 8:47 ` Jason Hui
2011-11-14 10:45 ` Marek Vasut
2011-11-15 10:10 ` Jason Hui
2011-11-15 11:08 ` Stefano Babic
2011-11-14 9:03 ` Stefano Babic
2011-11-14 9:42 ` Jason Hui
2011-11-14 11:49 ` Stefano Babic
2011-11-15 10:18 ` Jason Hui
2011-11-12 10:36 ` [U-Boot] [PATCH 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
2011-11-14 9:04 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 4/6] i.mx: serial_mxc: " Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-12 16:35 ` Marek Vasut
2011-11-14 8:37 ` Jason Hui
2011-11-14 10:42 ` Marek Vasut
2011-11-15 9:46 ` Jason Hui
2011-11-15 11:56 ` Stefano Babic
2011-11-16 1:36 ` Jason Hui
2011-11-16 2:24 ` Marek Vasut
2011-11-14 9:06 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board Jason Liu
2011-11-12 19:42 ` Fabio Estevam
2011-11-14 8:59 ` Jason Hui
2011-11-12 20:13 ` Fabio Estevam
2011-11-14 9:10 ` Jason Hui
2011-11-13 7:04 ` Igor Grinberg
2011-11-14 9:13 ` Jason Hui
2011-11-14 9:25 ` Stefano Babic
2011-11-14 9:55 ` Jason Hui
2011-11-14 11:36 ` Stefano Babic
2011-11-16 11:34 ` Dirk Behme
2011-11-16 12:15 ` Jason Hui
2011-11-12 16:10 ` [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Dirk Behme
2011-11-14 8:11 ` Jason Hui
2011-11-16 11:56 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201111140011.55220.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.