From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support
Date: Sat, 12 Nov 2011 17:10:29 +0100 [thread overview]
Message-ID: <4EBE9A75.7010709@googlemail.com> (raw)
In-Reply-To: <1321094190-8108-1-git-send-email-jason.hui@linaro.org>
On 12.11.2011 11:36, Jason Liu wrote:
> This patch-set add the initial support for freescale i.mx6q support.
> freescale i.mx6q is a quad core built on arm cortex_a9 complex.
>
> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and also
> make sure it does not break i.mx5 support
>
> Jason Liu (6):
> i.mx: i.mx5: Move some files to imx-common folder
> i.mx: Add the initial support for freescale i.MX6Q processor
Hmm, this patch, i.e. patch 2/6, is missing at the mailing list?
Dirk
> i.mx: mxc_gpio: add the i.mx6q support
> i.mx: serial_mxc: add the i.mx6q support
> i.mx: fsl_esdhc: add the i.mx6q support
> i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
>
> MAINTAINERS | 1 +
> Makefile | 7 +
> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
> arch/arm/cpu/armv7/imx-common/cpu_info.c | 108 ++
> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 77 -
> arch/arm/cpu/armv7/mx6/Makefile | 48 +
> arch/arm/cpu/armv7/mx6/clock.c | 388 +++++
> arch/arm/cpu/armv7/mx6/iomux-v3.c | 76 +
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 60 +
> arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} | 40 +-
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++
> .../mx5/speed.c => include/asm/arch-mx6/clock.h} | 45 +-
> .../mx5/speed.c => include/asm/arch-mx6/gpio.h} | 28 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 233 +++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 104 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683 ++++++++++++++++++++
> .../speed.c => include/asm/arch-mx6/sys_proto.h} | 31 +-
> board/freescale/mx6qarm2/Makefile | 48 +
> board/freescale/mx6qarm2/imximage.cfg | 167 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 163 ++
> boards.cfg | 1 +
> drivers/gpio/mxc_gpio.c | 4 +-
> drivers/mmc/fsl_esdhc.c | 14 +-
> drivers/serial/serial_mxc.c | 10 +-
> include/configs/mx6qarm2.h | 163 ++
> 28 files changed, 4303 insertions(+), 156 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
> copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
> copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} (57%)
> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h} (59%)
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h} (65%)
> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
> rename arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/sys_proto.h} (65%)
> create mode 100644 board/freescale/mx6qarm2/Makefile
> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
> create mode 100644 include/configs/mx6qarm2.h
>
next prev parent reply other threads:[~2011-11-12 16:10 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-12 10:36 [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 1/6] i.mx: i.mx5: Move some files to imx-common folder Jason Liu
2011-11-14 8:34 ` Stefano Babic
2011-11-14 8:57 ` Jason Hui
2011-11-14 11:28 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 2/6] i.mx: Add the initial support for freescale i.MX6Q processor Jason Liu
2011-11-13 23:11 ` Marek Vasut
2011-11-14 8:47 ` Jason Hui
2011-11-14 10:45 ` Marek Vasut
2011-11-15 10:10 ` Jason Hui
2011-11-15 11:08 ` Stefano Babic
2011-11-14 9:03 ` Stefano Babic
2011-11-14 9:42 ` Jason Hui
2011-11-14 11:49 ` Stefano Babic
2011-11-15 10:18 ` Jason Hui
2011-11-12 10:36 ` [U-Boot] [PATCH 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
2011-11-14 9:04 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 4/6] i.mx: serial_mxc: " Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-12 16:35 ` Marek Vasut
2011-11-14 8:37 ` Jason Hui
2011-11-14 10:42 ` Marek Vasut
2011-11-15 9:46 ` Jason Hui
2011-11-15 11:56 ` Stefano Babic
2011-11-16 1:36 ` Jason Hui
2011-11-16 2:24 ` Marek Vasut
2011-11-14 9:06 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board Jason Liu
2011-11-12 19:42 ` Fabio Estevam
2011-11-14 8:59 ` Jason Hui
2011-11-12 20:13 ` Fabio Estevam
2011-11-14 9:10 ` Jason Hui
2011-11-13 7:04 ` Igor Grinberg
2011-11-14 9:13 ` Jason Hui
2011-11-14 9:25 ` Stefano Babic
2011-11-14 9:55 ` Jason Hui
2011-11-14 11:36 ` Stefano Babic
2011-11-16 11:34 ` Dirk Behme
2011-11-16 12:15 ` Jason Hui
2011-11-12 16:10 ` Dirk Behme [this message]
2011-11-14 8:11 ` [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Hui
2011-11-16 11:56 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EBE9A75.7010709@googlemail.com \
--to=dirk.behme@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.