From: Sergei Trofimovich <slyich@gmail.com>
To: Rob Landley <rob@landley.net>
Cc: Aboriginal Linux <aboriginal@lists.landley.net>,
linux-kernel@vger.kernel.org, davem@davemloft.net, tytso@mit.edu,
sparclinux@vger.kernel.org
Subject: Re: Sparc-32 doesn't work in 3.1.
Date: Sun, 11 Dec 2011 08:17:57 +0000 [thread overview]
Message-ID: <20111211111801.5942ab39@sf.home> (raw)
In-Reply-To: <4EBF0A25.20604@landley.net>
[-- Attachment #1: Type: text/plain, Size: 1428 bytes --]
> > Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
> > Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
> > Fixup i f029ddfc doesn't refer to a valid instruction at
> > f00de648[95eea000]
> > halt, power off
>
> If anyone would like a reproduction sequence for this, the toolchain I use
> (which compiles commit 9933fc0ac1ac14b^1 just fine) is at:
>
> http://landley.net/aboriginal/downloads/binaries/cross-compiler-sparc.tar.bz2
Tried to build both with your crosscompiler and with gcc-4.5.3/binutils-2.21.1
Both boot but don't get to prompt (minimal config I guess).
(v3.1 works the same as 3.2.0-rc5)
Linux version 3.2.0-rc5 (slyfox@sf) (gcc version 4.2.1) #1 Sun Dec 11 11:08:25 FET 2011
bootconsole [earlyprom0] enabled
ARCH: SUN4M
TYPE: SPARCstation 5
Ethernet address: 52:54:00:12:34:56
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
OF stdout device is: /obio/zs@0,100000:a
PROM: Built device tree with 23073 bytes of memory.
Booting Linux...
Power off control detected.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28018
...
mousedev: PS/2 mouse device common for all mice
rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t08 as rtc0
turn off boot console earlyprom0
Can you share broken image to drive out qemu bug? (0.14.0 is here)
--
Sergei
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Sergei Trofimovich <slyich@gmail.com>
To: Rob Landley <rob@landley.net>
Cc: Aboriginal Linux <aboriginal@lists.landley.net>,
linux-kernel@vger.kernel.org, davem@davemloft.net, tytso@mit.edu,
sparclinux@vger.kernel.org
Subject: Re: Sparc-32 doesn't work in 3.1.
Date: Sun, 11 Dec 2011 11:17:57 +0300 [thread overview]
Message-ID: <20111211111801.5942ab39@sf.home> (raw)
In-Reply-To: <4EBF0A25.20604@landley.net>
[-- Attachment #1: Type: text/plain, Size: 1428 bytes --]
> > Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
> > Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
> > Fixup i f029ddfc doesn't refer to a valid instruction at
> > f00de648[95eea000]
> > halt, power off
>
> If anyone would like a reproduction sequence for this, the toolchain I use
> (which compiles commit 9933fc0ac1ac14b^1 just fine) is at:
>
> http://landley.net/aboriginal/downloads/binaries/cross-compiler-sparc.tar.bz2
Tried to build both with your crosscompiler and with gcc-4.5.3/binutils-2.21.1
Both boot but don't get to prompt (minimal config I guess).
(v3.1 works the same as 3.2.0-rc5)
Linux version 3.2.0-rc5 (slyfox@sf) (gcc version 4.2.1) #1 Sun Dec 11 11:08:25 FET 2011
bootconsole [earlyprom0] enabled
ARCH: SUN4M
TYPE: SPARCstation 5
Ethernet address: 52:54:00:12:34:56
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
OF stdout device is: /obio/zs@0,100000:a
PROM: Built device tree with 23073 bytes of memory.
Booting Linux...
Power off control detected.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28018
...
mousedev: PS/2 mouse device common for all mice
rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t08 as rtc0
turn off boot console earlyprom0
Can you share broken image to drive out qemu bug? (0.14.0 is here)
--
Sergei
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-12-11 8:17 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-12 17:22 Sparc-32 doesn't work in 3.1 Rob Landley
2011-11-12 17:22 ` Rob Landley
2011-11-13 0:07 ` Rob Landley
2011-11-13 0:07 ` Rob Landley
2011-12-11 8:17 ` Sergei Trofimovich [this message]
2011-12-11 8:17 ` Sergei Trofimovich
2011-12-14 2:23 ` Rob Landley
2011-12-14 2:23 ` Rob Landley
2011-12-14 17:42 ` Sergei Trofimovich
2011-12-14 17:42 ` Sergei Trofimovich
2011-12-14 17:49 ` Eric Dumazet
2011-12-14 17:49 ` Eric Dumazet
2011-12-14 17:53 ` David Miller
2011-12-14 17:53 ` David Miller
2011-12-14 17:54 ` David Miller
2011-12-14 17:54 ` David Miller
2011-12-14 18:18 ` David Miller
2011-12-14 18:18 ` David Miller
2011-12-14 18:55 ` Sergei Trofimovich
2011-12-14 18:55 ` Sergei Trofimovich
2011-12-14 19:13 ` David Miller
2011-12-14 19:13 ` David Miller
2011-12-14 19:27 ` Rob Landley
2011-12-14 19:27 ` Rob Landley
2011-12-14 19:26 ` Rob Landley
2011-12-14 19:26 ` Rob Landley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111211111801.5942ab39@sf.home \
--to=slyich@gmail.com \
--cc=aboriginal@lists.landley.net \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=rob@landley.net \
--cc=sparclinux@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.