All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Landley <rob@landley.net>
To: Aboriginal Linux <aboriginal@lists.landley.net>,
	linux-kernel@vger.kernel.org, davem@davemloft.net, tytso@mit.edu,
	sparclinux@vger.kernel.org
Subject: Re: Sparc-32 doesn't work in 3.1.
Date: Sun, 13 Nov 2011 00:07:01 +0000	[thread overview]
Message-ID: <4EBF0A25.20604@landley.net> (raw)
In-Reply-To: <4EBEAB5A.5020809@landley.net>

[-- Attachment #1: Type: text/plain, Size: 1302 bytes --]

On 11/12/2011 11:22 AM, Rob Landley wrote:
> Still trying to ship an Aboriginal Linux release with the 3.1 kernel,
> but the sparc target broke, as in QEMU's OpenBios goes:
> 
>   Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
>   Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
>   Fixup i f029ddfc doesn't refer to a valid instruction at
>   f00de648[95eea000]
>   halt, power off

If anyone would like a reproduction sequence for this, the toolchain I use
(which compiles commit 9933fc0ac1ac14b^1 just fine) is at:

  http://landley.net/aboriginal/downloads/binaries/cross-compiler-sparc.tar.bz2

I configure using the attached miniconfig, ala:

  make allnoconfig KCONFIG_ALLCONFIG=miniconfig.sparc ARCH=sparc

And then:

  PATH=/path/to/cross-compiler-sparc/bin:$PATH make ARCH=sparc \
    CROSS_COMPILE=sparc- -j 3

I then grab the file arch/sparc/boot/image out of the build and run:

  qemu-system-sparc -nographic -no-reboot -kernel image -hda /dev/null -m 256 \
    -append "root=/dev/sda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=sparc"

If you'd like a working system for comparison (built with the same
toolchain), download:

  http://landley.net/aboriginal/downloads/binaries/system-image-sparc.tar.bz2

And run-emulator.sh out of that.

Rob

[-- Attachment #2: miniconfig.sparc --]
[-- Type: text/plain, Size: 1059 bytes --]

CONFIG_EXPERIMENTAL=y
CONFIG_NO_HZ=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PCI=y
CONFIG_BINFMT_ELF=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_IDE=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139CP=y
CONFIG_HW_RANDOM=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_DEV=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_TMPFS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEVTMPFS=y

CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_NET=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y

CONFIG_SCSI_SUNESP=y
CONFIG_SUNLANCE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SUN_MOSTEK_RTC=y


WARNING: multiple messages have this Message-ID (diff)
From: Rob Landley <rob@landley.net>
To: Aboriginal Linux <aboriginal@lists.landley.net>,
	linux-kernel@vger.kernel.org, davem@davemloft.net, tytso@mit.edu,
	sparclinux@vger.kernel.org
Subject: Re: Sparc-32 doesn't work in 3.1.
Date: Sat, 12 Nov 2011 18:07:01 -0600	[thread overview]
Message-ID: <4EBF0A25.20604@landley.net> (raw)
In-Reply-To: <4EBEAB5A.5020809@landley.net>

[-- Attachment #1: Type: text/plain, Size: 1302 bytes --]

On 11/12/2011 11:22 AM, Rob Landley wrote:
> Still trying to ship an Aboriginal Linux release with the 3.1 kernel,
> but the sparc target broke, as in QEMU's OpenBios goes:
> 
>   Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
>   Patching kernel for srmmu[Fujitsu TurboSparc]/iommu
>   Fixup i f029ddfc doesn't refer to a valid instruction at
>   f00de648[95eea000]
>   halt, power off

If anyone would like a reproduction sequence for this, the toolchain I use
(which compiles commit 9933fc0ac1ac14b^1 just fine) is at:

  http://landley.net/aboriginal/downloads/binaries/cross-compiler-sparc.tar.bz2

I configure using the attached miniconfig, ala:

  make allnoconfig KCONFIG_ALLCONFIG=miniconfig.sparc ARCH=sparc

And then:

  PATH=/path/to/cross-compiler-sparc/bin:$PATH make ARCH=sparc \
    CROSS_COMPILE=sparc- -j 3

I then grab the file arch/sparc/boot/image out of the build and run:

  qemu-system-sparc -nographic -no-reboot -kernel image -hda /dev/null -m 256 \
    -append "root=/dev/sda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=sparc"

If you'd like a working system for comparison (built with the same
toolchain), download:

  http://landley.net/aboriginal/downloads/binaries/system-image-sparc.tar.bz2

And run-emulator.sh out of that.

Rob

[-- Attachment #2: miniconfig.sparc --]
[-- Type: text/plain, Size: 1059 bytes --]

CONFIG_EXPERIMENTAL=y
CONFIG_NO_HZ=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PCI=y
CONFIG_BINFMT_ELF=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_IDE=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139CP=y
CONFIG_HW_RANDOM=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_DEV=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_TMPFS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEVTMPFS=y

CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_NET=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y

CONFIG_SCSI_SUNESP=y
CONFIG_SUNLANCE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
CONFIG_SUN_MOSTEK_RTC=y


  reply	other threads:[~2011-11-13  0:07 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-12 17:22 Sparc-32 doesn't work in 3.1 Rob Landley
2011-11-12 17:22 ` Rob Landley
2011-11-13  0:07 ` Rob Landley [this message]
2011-11-13  0:07   ` Rob Landley
2011-12-11  8:17   ` Sergei Trofimovich
2011-12-11  8:17     ` Sergei Trofimovich
2011-12-14  2:23     ` Rob Landley
2011-12-14  2:23       ` Rob Landley
2011-12-14 17:42       ` Sergei Trofimovich
2011-12-14 17:42         ` Sergei Trofimovich
2011-12-14 17:49         ` Eric Dumazet
2011-12-14 17:49           ` Eric Dumazet
2011-12-14 17:53         ` David Miller
2011-12-14 17:53           ` David Miller
2011-12-14 17:54         ` David Miller
2011-12-14 17:54           ` David Miller
2011-12-14 18:18           ` David Miller
2011-12-14 18:18             ` David Miller
2011-12-14 18:55             ` Sergei Trofimovich
2011-12-14 18:55               ` Sergei Trofimovich
2011-12-14 19:13               ` David Miller
2011-12-14 19:13                 ` David Miller
2011-12-14 19:27                 ` Rob Landley
2011-12-14 19:27                   ` Rob Landley
2011-12-14 19:26             ` Rob Landley
2011-12-14 19:26               ` Rob Landley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EBF0A25.20604@landley.net \
    --to=rob@landley.net \
    --cc=aboriginal@lists.landley.net \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sparclinux@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.