From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: ben-linux@fluff.org, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver
Date: Sun, 4 Mar 2012 19:06:19 +0100 [thread overview]
Message-ID: <201203041906.20249.heiko@sntech.de> (raw)
In-Reply-To: <201203041902.38318.heiko@sntech.de>
This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.
This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 5 ++++
arch/arm/mach-s3c24xx/Makefile | 1 +
arch/arm/mach-s3c24xx/setup-spi.c | 39 +++++++++++++++++++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5ebd150..bc6758a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -484,6 +484,11 @@ config S3C2443_DMA
help
Internal config node for S3C2443 DMA support
+config S3C2443_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 1909d66..0f5d2dd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 0000000..5712c85
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+ .high_speed = 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+ /* enable hsspi bit in misccr */
+ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+ s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ return 0;
+}
+#endif
--
1.7.2.3
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver
Date: Sun, 4 Mar 2012 19:06:19 +0100 [thread overview]
Message-ID: <201203041906.20249.heiko@sntech.de> (raw)
In-Reply-To: <201203041902.38318.heiko@sntech.de>
This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.
This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 5 ++++
arch/arm/mach-s3c24xx/Makefile | 1 +
arch/arm/mach-s3c24xx/setup-spi.c | 39 +++++++++++++++++++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5ebd150..bc6758a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -484,6 +484,11 @@ config S3C2443_DMA
help
Internal config node for S3C2443 DMA support
+config S3C2443_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 1909d66..0f5d2dd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 0000000..5712c85
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+ .high_speed = 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+ /* enable hsspi bit in misccr */
+ s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+ s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+ return 0;
+}
+#endif
--
1.7.2.3
next prev parent reply other threads:[~2012-03-04 18:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-04 18:02 [PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443 Heiko Stübner
2012-03-04 18:02 ` Heiko Stübner
2012-03-04 18:03 ` [PATCH 1/6] ARM: S3C24XX: Add forgotten clock lookup table to S3C2443 Heiko Stübner
2012-03-04 18:03 ` Heiko Stübner
2012-03-04 18:03 ` [PATCH 2/6] ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443 Heiko Stübner
2012-03-04 18:03 ` Heiko Stübner
2012-03-04 18:04 ` [PATCH 3/6] ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices Heiko Stübner
2012-03-04 18:04 ` Heiko Stübner
2012-03-04 18:05 ` [PATCH 4/6] ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi Heiko Stübner
2012-03-04 18:05 ` Heiko Stübner
2012-03-04 18:06 ` Heiko Stübner [this message]
2012-03-04 18:06 ` [PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver Heiko Stübner
2012-03-04 18:09 ` [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX Heiko Stübner
2012-03-04 18:09 ` Heiko Stübner
[not found] ` <201203041909.10400.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2012-03-09 17:52 ` Grant Likely
2012-03-09 17:52 ` Grant Likely
2012-03-09 17:52 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203041906.20249.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.