[PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443

[PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443

[Heiko Stübner]

The S3C2416/S3C2443/S3C2450 SoCs contain HSSPI controllers compatible
with the ones in the S3C64xx and later.

The second patch modifying the dma selection depends on the series
enabling the dma support on the S3C2416, but as the whole s3c64xx-spi
driver needs dma support this should be ok.

Tested on an Asus DR-900 ebook reader with a Marvell MR8686 using the
libertas driver.

Heiko Stuebner (6):
  ARM: S3C24XX: Add forgotten clock lookup table to S3C2443
  ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443
  ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices
  ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi
  ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver
  spi/s3c64xx: Allow usage for ARCH_S3C24XX

 arch/arm/mach-s3c24xx/Kconfig            |    5 ++++
 arch/arm/mach-s3c24xx/Makefile           |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2416.c    |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2443.c    |    6 ++++
 arch/arm/mach-s3c24xx/common-s3c2443.c   |   15 +++++++----
 arch/arm/mach-s3c24xx/dma-s3c2443.c      |   16 +++++++++---
 arch/arm/mach-s3c24xx/include/mach/dma.h |    4 +++
 arch/arm/mach-s3c24xx/include/mach/map.h |    5 ++++
 arch/arm/mach-s3c24xx/setup-spi.c        |   39 ++++++++++++++++++++++++++++++
 drivers/spi/Kconfig                      |    2 +-
 10 files changed, 84 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c

-- 
1.7.2.3

[PATCH 0/6] S3C24XX: Add support for HSSPI on S3C2416/S3C2443

[Heiko Stübner]

The S3C2416/S3C2443/S3C2450 SoCs contain HSSPI controllers compatible
with the ones in the S3C64xx and later.

The second patch modifying the dma selection depends on the series
enabling the dma support on the S3C2416, but as the whole s3c64xx-spi
driver needs dma support this should be ok.

Tested on an Asus DR-900 ebook reader with a Marvell MR8686 using the
libertas driver.

Heiko Stuebner (6):
  ARM: S3C24XX: Add forgotten clock lookup table to S3C2443
  ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443
  ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices
  ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi
  ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver
  spi/s3c64xx: Allow usage for ARCH_S3C24XX

 arch/arm/mach-s3c24xx/Kconfig            |    5 ++++
 arch/arm/mach-s3c24xx/Makefile           |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2416.c    |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2443.c    |    6 ++++
 arch/arm/mach-s3c24xx/common-s3c2443.c   |   15 +++++++----
 arch/arm/mach-s3c24xx/dma-s3c2443.c      |   16 +++++++++---
 arch/arm/mach-s3c24xx/include/mach/dma.h |    4 +++
 arch/arm/mach-s3c24xx/include/mach/map.h |    5 ++++
 arch/arm/mach-s3c24xx/setup-spi.c        |   39 ++++++++++++++++++++++++++++++
 drivers/spi/Kconfig                      |    2 +-
 10 files changed, 84 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c

-- 
1.7.2.3

[PATCH 1/6] ARM: S3C24XX: Add forgotten clock lookup table to S3C2443

[Heiko Stübner]

When the hsmmc clock lookup was changed to be lookup tables based,
it seems the S3C2443 was forgotten.

As subsequent patches will want to add more lookups to it, this
patch adds the base table with missing hsmmc lookup.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/clock-s3c2443.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac3..bce1cd3 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,10 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +214,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }
-- 
1.7.2.3

[PATCH 1/6] ARM: S3C24XX: Add forgotten clock lookup table to S3C2443

[Heiko Stübner]

When the hsmmc clock lookup was changed to be lookup tables based,
it seems the S3C2443 was forgotten.

As subsequent patches will want to add more lookups to it, this
patch adds the base table with missing hsmmc lookup.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/clock-s3c2443.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac3..bce1cd3 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,10 @@ static struct clk *clks[] __initdata = {
 	&clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +214,7 @@ void __init s3c2443_init_clocks(int xtal)
 
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
 	s3c_pwmclk_init();
 }
-- 
1.7.2.3

[PATCH 2/6] ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443

[Heiko Stübner]

SoCs starting with the S3C2443 contain SPI controllers compatible with the
spi-s3c64xx driver and therefore need separate dma channels for rx and tx.

This patch introduces dma channel declarations for these and changes the
dma-s3c2443.c accordingly.

None of the older SoCs use the spi-dma at all. Most boards bitbang their
spi use and the spi-s3c24xx driver also does not use the dma system.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/dma-s3c2443.c      |   16 ++++++++++++----
 arch/arm/mach-s3c24xx/include/mach/dma.h |    4 ++++
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c47..2d94228 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfec..454831b 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 
-- 
1.7.2.3

[PATCH 2/6] ARM: S3C24XX: claim spi channels for hsspi in dma-s3c2443

[Heiko Stübner]

SoCs starting with the S3C2443 contain SPI controllers compatible with the
spi-s3c64xx driver and therefore need separate dma channels for rx and tx.

This patch introduces dma channel declarations for these and changes the
dma-s3c2443.c accordingly.

None of the older SoCs use the spi-dma at all. Most boards bitbang their
spi use and the spi-s3c24xx driver also does not use the dma system.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/dma-s3c2443.c      |   16 ++++++++++++----
 arch/arm/mach-s3c24xx/include/mach/dma.h |    4 ++++
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c47..2d94228 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
 		.name		= "sdi",
 		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
 	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
+	[DMACH_SPI0_RX] = {
+		.name		= "spi0-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0RX),
+	},
+	[DMACH_SPI0_TX] = {
+		.name		= "spi0-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
 	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
+	[DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-rx",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1RX),
+	},
+	[DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+		.name		= "spi1-tx",
 		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
 	},
 	[DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfec..454831b 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
 	DMACH_UART2_SRC2,
 	DMACH_UART3,		/* s3c2443 has extra uart */
 	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
 	DMACH_MAX,		/* the end entry */
 };
 
-- 
1.7.2.3

[PATCH 3/6] ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices

[Heiko Stübner]

The S3C_PA_SPIx constants are only used by the s3c64xx-spi driver
and don't conflict with the older SoCs as they don't support hsspi.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/include/mach/map.h |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807..8ba381f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
-- 
1.7.2.3

[PATCH 3/6] ARM: S3C24XX: Add map entries needed by the s3c64xx-spi devices

[Heiko Stübner]

The S3C_PA_SPIx constants are only used by the s3c64xx-spi driver
and don't conflict with the older SoCs as they don't support hsspi.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/include/mach/map.h |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807..8ba381f 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI	   (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
-- 
1.7.2.3

[PATCH 4/6] ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi

[Heiko Stübner]

Currently usable are busclk0 and busclk2.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/clock-s3c2416.c  |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2443.c  |    1 +
 arch/arm/mach-s3c24xx/common-s3c2443.c |   15 ++++++++++-----
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4..8702ecf 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index bce1cd3..bb3231d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -181,6 +181,7 @@ static struct clk *clks[] __initdata = {
 
 static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi),
 };
 
 void __init s3c2443_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 4604315..aeeb2be 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-- 
1.7.2.3

[PATCH 4/6] ARM: S3C24XX: Add clock-lookup entries required by s3c64xx-spi

[Heiko Stübner]

Currently usable are busclk0 and busclk2.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/clock-s3c2416.c  |    1 +
 arch/arm/mach-s3c24xx/clock-s3c2443.c  |    1 +
 arch/arm/mach-s3c24xx/common-s3c2443.c |   15 ++++++++++-----
 3 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4..8702ecf 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
 	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index bce1cd3..bb3231d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -181,6 +181,7 @@ static struct clk *clks[] __initdata = {
 
 static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi),
 };
 
 void __init s3c2443_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 4604315..aeeb2be 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_IIS,
 	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
 		.name		= "adc",
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
 	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+	.name		= "spi",
+	.devname	= "s3c64xx-spi.0",
+	.parent		= &clk_p,
+	.enable		= s3c2443_clkcon_enable_p,
+	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
 	&clk_usb_bus,
 	&clk_armdiv,
 	&hsmmc1_clk,
+	&hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
 	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-- 
1.7.2.3

[PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver

[Heiko Stübner]

This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.

This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/Kconfig     |    5 ++++
 arch/arm/mach-s3c24xx/Makefile    |    1 +
 arch/arm/mach-s3c24xx/setup-spi.c |   39 +++++++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5ebd150..bc6758a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -484,6 +484,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 1909d66..0f5d2dd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 0000000..5712c85
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif
-- 
1.7.2.3

[PATCH 5/6] ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver

[Heiko Stübner]

This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.

This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/Kconfig     |    5 ++++
 arch/arm/mach-s3c24xx/Makefile    |    1 +
 arch/arm/mach-s3c24xx/setup-spi.c |   39 +++++++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s3c24xx/setup-spi.c

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5ebd150..bc6758a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -484,6 +484,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 1909d66..0f5d2dd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 0000000..5712c85
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif
-- 
1.7.2.3

[PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX

[Heiko Stübner]

Newer SoCs from the S3C24XX line, namely S3C2416/2443/2450 contain
hsspi-controllers compatible with the s3c64xx type.

The previous patches enabled platform support for it, so make the
driver also usable for the S3C24xx architecture.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
As it is part of a series this probably needs an ack from Grant Likely
and should be merged via the samsung tree.

 drivers/spi/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ac92194..e411364 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
-- 
1.7.2.3

[PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX

[Heiko Stübner]

Newer SoCs from the S3C24XX line, namely S3C2416/2443/2450 contain
hsspi-controllers compatible with the s3c64xx type.

The previous patches enabled platform support for it, so make the
driver also usable for the S3C24xx architecture.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
As it is part of a series this probably needs an ack from Grant Likely
and should be merged via the samsung tree.

 drivers/spi/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ac92194..e411364 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ
 
 config SPI_S3C64XX
 	tristate "Samsung S3C64XX series type SPI"
-	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
+	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  SPI driver for Samsung S3C64XX and newer SoCs.
-- 
1.7.2.3

Re: [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX

[Grant Likely]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1311 bytes --]

On Sun, 4 Mar 2012 19:09:10 +0100, Heiko Stübner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> wrote:
> Newer SoCs from the S3C24XX line, namely S3C2416/2443/2450 contain
> hsspi-controllers compatible with the s3c64xx type.
> 
> The previous patches enabled platform support for it, so make the
> driver also usable for the S3C24xx architecture.
> 
> Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>

Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>

> ---
> As it is part of a series this probably needs an ack from Grant Likely
> and should be merged via the samsung tree.
> 
>  drivers/spi/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index ac92194..e411364 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ
>  
>  config SPI_S3C64XX
>  	tristate "Samsung S3C64XX series type SPI"
> -	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
> +	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
>  	select S3C64XX_DMA if ARCH_S3C64XX
>  	help
>  	  SPI driver for Samsung S3C64XX and newer SoCs.
> -- 
> 1.7.2.3
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.


[-- Attachment #2: Type: text/plain, Size: 317 bytes --]

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

[-- Attachment #3: Type: text/plain, Size: 210 bytes --]

_______________________________________________
spi-devel-general mailing list
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/spi-devel-general

[PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX

[Grant Likely]

On Sun, 4 Mar 2012 19:09:10 +0100, Heiko St??bner <heiko@sntech.de> wrote:
> Newer SoCs from the S3C24XX line, namely S3C2416/2443/2450 contain
> hsspi-controllers compatible with the s3c64xx type.
> 
> The previous patches enabled platform support for it, so make the
> driver also usable for the S3C24xx architecture.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Acked-by: Grant Likely <grant.likely@secretlab.ca>

> ---
> As it is part of a series this probably needs an ack from Grant Likely
> and should be merged via the samsung tree.
> 
>  drivers/spi/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index ac92194..e411364 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ
>  
>  config SPI_S3C64XX
>  	tristate "Samsung S3C64XX series type SPI"
> -	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
> +	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
>  	select S3C64XX_DMA if ARCH_S3C64XX
>  	help
>  	  SPI driver for Samsung S3C64XX and newer SoCs.
> -- 
> 1.7.2.3
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.

Re: [PATCH 6/6] spi/s3c64xx: Allow usage for ARCH_S3C24XX

[Grant Likely]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1311 bytes --]

On Sun, 4 Mar 2012 19:09:10 +0100, Heiko Stübner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> wrote:
> Newer SoCs from the S3C24XX line, namely S3C2416/2443/2450 contain
> hsspi-controllers compatible with the s3c64xx type.
> 
> The previous patches enabled platform support for it, so make the
> driver also usable for the S3C24xx architecture.
> 
> Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>

Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>

> ---
> As it is part of a series this probably needs an ack from Grant Likely
> and should be merged via the samsung tree.
> 
>  drivers/spi/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index ac92194..e411364 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -299,7 +299,7 @@ config SPI_S3C24XX_FIQ
>  
>  config SPI_S3C64XX
>  	tristate "Samsung S3C64XX series type SPI"
> -	depends on (ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
> +	depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
>  	select S3C64XX_DMA if ARCH_S3C64XX
>  	help
>  	  SPI driver for Samsung S3C64XX and newer SoCs.
> -- 
> 1.7.2.3
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.


[-- Attachment #2: Type: text/plain, Size: 317 bytes --]

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/

[-- Attachment #3: Type: text/plain, Size: 210 bytes --]

_______________________________________________
spi-devel-general mailing list
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/spi-devel-general