From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325
Date: Sat, 24 Mar 2012 19:26:00 +0000 [thread overview]
Message-ID: <201203241926.00597.arnd@arndb.de> (raw)
In-Reply-To: <1332594876-8673-2-git-send-email-jm@lentin.co.uk>
On Saturday 24 March 2012, Jamie Lentin wrote:
>
> Add support for the DNS-320 and DNS-325. Describe as much as currently possible
> in the devicetree files, create a board-dnskw.c for everything else.
>
> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Looks good to me.
Jason, do you want to add these to your tree? You are already have some
the patches for dreamplug, and I think it makes sense to update these two
together when you have more patches.
Since the dnskw board file contains mostly gpio setup, I think it would
be good if one of you could take that part on next: once the gpio controller
uses DT probing, you can move all the gpio leds and buttons into the
device tree, which drastically shrinks the dnskw file.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Arnd
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
To: Jamie Lentin <jm-Pj/HzkgeCk7QXOPxS62xeg@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Jason <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325
Date: Sat, 24 Mar 2012 19:26:00 +0000 [thread overview]
Message-ID: <201203241926.00597.arnd@arndb.de> (raw)
In-Reply-To: <1332594876-8673-2-git-send-email-jm-Pj/HzkgeCk7QXOPxS62xeg@public.gmane.org>
On Saturday 24 March 2012, Jamie Lentin wrote:
>
> Add support for the DNS-320 and DNS-325. Describe as much as currently possible
> in the devicetree files, create a board-dnskw.c for everything else.
>
> Signed-off-by: Jamie Lentin <jm-Pj/HzkgeCk7QXOPxS62xeg@public.gmane.org>
Looks good to me.
Jason, do you want to add these to your tree? You are already have some
the patches for dreamplug, and I think it makes sense to update these two
together when you have more patches.
Since the dnskw board file contains mostly gpio setup, I think it would
be good if one of you could take that part on next: once the gpio controller
uses DT probing, you can move all the gpio leds and buttons into the
device tree, which drastically shrinks the dnskw file.
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Arnd
next prev parent reply other threads:[~2012-03-24 19:26 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-24 13:14 [PATCH V2 0/3] Add support for DNS-320 and DNS-325 using devicetree Jamie Lentin
2012-03-24 13:14 ` Jamie Lentin
2012-03-24 13:14 ` [PATCH V2 1/3] ARM: kirkwood: Basic support for DNS-320 and DNS-325 Jamie Lentin
2012-03-24 13:14 ` Jamie Lentin
2012-03-24 19:26 ` Arnd Bergmann [this message]
2012-03-24 19:26 ` Arnd Bergmann
2012-03-25 15:05 ` Jason Cooper
2012-03-25 15:05 ` Jason Cooper
2012-03-24 13:14 ` [PATCH V2 2/3] ARM: kirkwood: Convert orion-nand to fdt Jamie Lentin
2012-03-24 13:14 ` Jamie Lentin
2012-03-24 19:01 ` Arnd Bergmann
2012-03-24 19:01 ` Arnd Bergmann
2012-03-25 0:17 ` [PATCH V3 " Jamie Lentin
2012-03-25 0:17 ` Jamie Lentin
2012-03-25 7:52 ` Arnd Bergmann
2012-03-25 7:52 ` Arnd Bergmann
2012-03-25 14:57 ` Jason Cooper
2012-03-25 14:57 ` Jason Cooper
2012-03-24 13:14 ` [PATCH V2 3/3] ARM: kirkwood: Define NAND partitions in dts Jamie Lentin
2012-03-24 13:14 ` Jamie Lentin
2012-03-24 19:01 ` Arnd Bergmann
2012-03-24 19:01 ` Arnd Bergmann
2012-03-26 15:53 ` Scott Wood
2012-03-26 15:53 ` Scott Wood
2012-03-26 16:20 ` Jason Cooper
2012-03-26 16:20 ` Jason Cooper
2012-03-26 16:28 ` Scott Wood
2012-03-26 16:28 ` Scott Wood
2012-03-26 16:36 ` Jamie Lentin
2012-03-26 16:36 ` Jamie Lentin
2012-03-26 16:43 ` Jason Cooper
2012-03-26 16:43 ` Jason Cooper
2012-03-26 16:52 ` [PATCH] ARM: kirkwood: fdt: use IEEE1275 status = "okay" Jason Cooper
2012-03-26 16:52 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203241926.00597.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.