From: Marek Vasut <marex@denx.de>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Chris Ball <cjb@laptop.org>,
Dong Aisheng <dong.aisheng@linaro.org>
Subject: Re: [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter
Date: Tue, 8 May 2012 01:43:49 +0200 [thread overview]
Message-ID: <201205080143.49806.marex@denx.de> (raw)
In-Reply-To: <1336401793-13753-3-git-send-email-shawn.guo@linaro.org>
Dear Shawn Guo,
> Let macro ssp_is_old take host as parameter to make the code easy
> to read.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> drivers/mmc/host/mxs-mmc.c | 59
> ++++++++++++++++++++++--------------------- 1 files changed, 30
> insertions(+), 29 deletions(-)
>
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 2ea5361..13907e4 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -51,7 +51,7 @@
> #define MXS_MMC_DETECT_TIMEOUT (HZ/2)
>
> #define SSP_VERSION_LATEST 4
> -#define ssp_is_old() (host->version < SSP_VERSION_LATEST)
> +#define ssp_is_old(host) (host->version < SSP_VERSION_LATEST)
(host)->version ... to make the macro safer.
>
> /* SSP registers */
> #define HW_SSP_CTRL0 0x000
> @@ -86,14 +86,14 @@
> #define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
> #define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
> #define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
> -#define HW_SSP_TIMING (ssp_is_old() ? 0x050 :
0x070)
> +#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
> #define BP_SSP_TIMING_TIMEOUT (16)
> #define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
> #define BP_SSP_TIMING_CLOCK_DIVIDE (8)
> #define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
> #define BP_SSP_TIMING_CLOCK_RATE (0)
> #define BM_SSP_TIMING_CLOCK_RATE (0xff)
> -#define HW_SSP_CTRL1 (ssp_is_old() ? 0x060 : 0x080)
> +#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 :
0x080)
> #define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
> #define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
> #define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
> @@ -116,11 +116,11 @@
> #define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
> #define BP_SSP_CTRL1_SSP_MODE (0)
> #define BM_SSP_CTRL1_SSP_MODE (0xf)
> -#define HW_SSP_SDRESP0 (ssp_is_old() ? 0x080 :
0x0a0)
> -#define HW_SSP_SDRESP1 (ssp_is_old() ? 0x090 :
0x0b0)
> -#define HW_SSP_SDRESP2 (ssp_is_old() ? 0x0a0 :
0x0c0)
> -#define HW_SSP_SDRESP3 (ssp_is_old() ? 0x0b0 :
0x0d0)
> -#define HW_SSP_STATUS (ssp_is_old() ? 0x0c0 :
0x100)
> +#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
> +#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
> +#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
> +#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
> +#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
> #define BM_SSP_STATUS_CARD_DETECT (1 << 28)
> #define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
> #define HW_SSP_VERSION (cpu_is_mx23() ? 0x110 :
0x130)
> @@ -183,7 +183,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
> {
> struct mxs_mmc_host *host = mmc_priv(mmc);
>
> - return !(readl(host->base + HW_SSP_STATUS) &
> + return !(readl(host->base + HW_SSP_STATUS(host)) &
> BM_SSP_STATUS_CARD_DETECT);
> }
>
> @@ -207,7 +207,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
> writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
> BF_SSP(2, TIMING_CLOCK_DIVIDE) |
> BF_SSP(0, TIMING_CLOCK_RATE),
> - host->base + HW_SSP_TIMING);
> + host->base + HW_SSP_TIMING(host));
>
> if (host->sdio_irq_en) {
> ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
> @@ -215,7 +215,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
> }
>
> writel(ctrl0, host->base + HW_SSP_CTRL0);
> - writel(ctrl1, host->base + HW_SSP_CTRL1);
> + writel(ctrl1, host->base + HW_SSP_CTRL1(host));
> }
>
> static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
> @@ -229,12 +229,12 @@ static void mxs_mmc_request_done(struct mxs_mmc_host
> *host)
>
> if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
> if (mmc_resp_type(cmd) & MMC_RSP_136) {
> - cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0);
> - cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1);
> - cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2);
> - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3);
> + cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
> + cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
> + cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
> + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
> } else {
> - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0);
> + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
> }
> }
>
> @@ -277,11 +277,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void
> *dev_id)
>
> spin_lock(&host->lock);
>
> - stat = readl(host->base + HW_SSP_CTRL1);
> + stat = readl(host->base + HW_SSP_CTRL1(host));
> writel(stat & MXS_MMC_IRQ_BITS,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
>
> - if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
> + if ((sta & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
^ s/sta/stat/ ... did you try compiling this at all ? :-)
> mmc_signal_sdio_irq(host->mmc);
>
> spin_unlock(&host->lock);
> @@ -485,7 +485,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
> blocks = 1;
>
> /* xfer count, block size and count need to be set differently */
> - if (ssp_is_old()) {
> + if (ssp_is_old(host)) {
> ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
> cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
> BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
> @@ -509,10 +509,10 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
>
> /* set the timeout count */
> timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
> - val = readl(host->base + HW_SSP_TIMING);
> + val = readl(host->base + HW_SSP_TIMING(host));
> val &= ~(BM_SSP_TIMING_TIMEOUT);
> val |= BF_SSP(timeout, TIMING_TIMEOUT);
> - writel(val, host->base + HW_SSP_TIMING);
> + writel(val, host->base + HW_SSP_TIMING(host));
>
> /* pio */
> host->ssp_pio_words[0] = ctrl0;
> @@ -598,11 +598,11 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host
> *host, unsigned int rate)
>
> ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
>
> - val = readl(host->base + HW_SSP_TIMING);
> + val = readl(host->base + HW_SSP_TIMING(host));
> val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
> val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
> val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
> - writel(val, host->base + HW_SSP_TIMING);
> + writel(val, host->base + HW_SSP_TIMING(host));
>
> host->clk_rate = ssp_sck;
>
> @@ -639,16 +639,17 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host
> *mmc, int enable) writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
> host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_SET);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
>
> - if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
> + if (readl(host->base + HW_SSP_STATUS(host)) &
> + BM_SSP_STATUS_SDIO_IRQ)
> mmc_signal_sdio_irq(host->mmc);
>
> } else {
> writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
> host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
> }
>
> spin_unlock_irqrestore(&host->lock, flags);
> @@ -765,8 +766,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
>
> mmc->max_segs = 52;
> mmc->max_blk_size = 1 << 0xf;
> - mmc->max_blk_count = (ssp_is_old()) ? 0xff : 0xffffff;
> - mmc->max_req_size = (ssp_is_old()) ? 0xffff : 0xffffffff;
> + mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
> + mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
> mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
>
> platform_set_drvdata(pdev, mmc);
WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter
Date: Tue, 8 May 2012 01:43:49 +0200 [thread overview]
Message-ID: <201205080143.49806.marex@denx.de> (raw)
In-Reply-To: <1336401793-13753-3-git-send-email-shawn.guo@linaro.org>
Dear Shawn Guo,
> Let macro ssp_is_old take host as parameter to make the code easy
> to read.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> drivers/mmc/host/mxs-mmc.c | 59
> ++++++++++++++++++++++--------------------- 1 files changed, 30
> insertions(+), 29 deletions(-)
>
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index 2ea5361..13907e4 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -51,7 +51,7 @@
> #define MXS_MMC_DETECT_TIMEOUT (HZ/2)
>
> #define SSP_VERSION_LATEST 4
> -#define ssp_is_old() (host->version < SSP_VERSION_LATEST)
> +#define ssp_is_old(host) (host->version < SSP_VERSION_LATEST)
(host)->version ... to make the macro safer.
>
> /* SSP registers */
> #define HW_SSP_CTRL0 0x000
> @@ -86,14 +86,14 @@
> #define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
> #define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
> #define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
> -#define HW_SSP_TIMING (ssp_is_old() ? 0x050 :
0x070)
> +#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
> #define BP_SSP_TIMING_TIMEOUT (16)
> #define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
> #define BP_SSP_TIMING_CLOCK_DIVIDE (8)
> #define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
> #define BP_SSP_TIMING_CLOCK_RATE (0)
> #define BM_SSP_TIMING_CLOCK_RATE (0xff)
> -#define HW_SSP_CTRL1 (ssp_is_old() ? 0x060 : 0x080)
> +#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 :
0x080)
> #define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
> #define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
> #define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
> @@ -116,11 +116,11 @@
> #define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
> #define BP_SSP_CTRL1_SSP_MODE (0)
> #define BM_SSP_CTRL1_SSP_MODE (0xf)
> -#define HW_SSP_SDRESP0 (ssp_is_old() ? 0x080 :
0x0a0)
> -#define HW_SSP_SDRESP1 (ssp_is_old() ? 0x090 :
0x0b0)
> -#define HW_SSP_SDRESP2 (ssp_is_old() ? 0x0a0 :
0x0c0)
> -#define HW_SSP_SDRESP3 (ssp_is_old() ? 0x0b0 :
0x0d0)
> -#define HW_SSP_STATUS (ssp_is_old() ? 0x0c0 :
0x100)
> +#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
> +#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
> +#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
> +#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
> +#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
> #define BM_SSP_STATUS_CARD_DETECT (1 << 28)
> #define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
> #define HW_SSP_VERSION (cpu_is_mx23() ? 0x110 :
0x130)
> @@ -183,7 +183,7 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc)
> {
> struct mxs_mmc_host *host = mmc_priv(mmc);
>
> - return !(readl(host->base + HW_SSP_STATUS) &
> + return !(readl(host->base + HW_SSP_STATUS(host)) &
> BM_SSP_STATUS_CARD_DETECT);
> }
>
> @@ -207,7 +207,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
> writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
> BF_SSP(2, TIMING_CLOCK_DIVIDE) |
> BF_SSP(0, TIMING_CLOCK_RATE),
> - host->base + HW_SSP_TIMING);
> + host->base + HW_SSP_TIMING(host));
>
> if (host->sdio_irq_en) {
> ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
> @@ -215,7 +215,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
> }
>
> writel(ctrl0, host->base + HW_SSP_CTRL0);
> - writel(ctrl1, host->base + HW_SSP_CTRL1);
> + writel(ctrl1, host->base + HW_SSP_CTRL1(host));
> }
>
> static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
> @@ -229,12 +229,12 @@ static void mxs_mmc_request_done(struct mxs_mmc_host
> *host)
>
> if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
> if (mmc_resp_type(cmd) & MMC_RSP_136) {
> - cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0);
> - cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1);
> - cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2);
> - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3);
> + cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
> + cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
> + cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
> + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
> } else {
> - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0);
> + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
> }
> }
>
> @@ -277,11 +277,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void
> *dev_id)
>
> spin_lock(&host->lock);
>
> - stat = readl(host->base + HW_SSP_CTRL1);
> + stat = readl(host->base + HW_SSP_CTRL1(host));
> writel(stat & MXS_MMC_IRQ_BITS,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
>
> - if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
> + if ((sta & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
^ s/sta/stat/ ... did you try compiling this at all ? :-)
> mmc_signal_sdio_irq(host->mmc);
>
> spin_unlock(&host->lock);
> @@ -485,7 +485,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
> blocks = 1;
>
> /* xfer count, block size and count need to be set differently */
> - if (ssp_is_old()) {
> + if (ssp_is_old(host)) {
> ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
> cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
> BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
> @@ -509,10 +509,10 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
>
> /* set the timeout count */
> timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
> - val = readl(host->base + HW_SSP_TIMING);
> + val = readl(host->base + HW_SSP_TIMING(host));
> val &= ~(BM_SSP_TIMING_TIMEOUT);
> val |= BF_SSP(timeout, TIMING_TIMEOUT);
> - writel(val, host->base + HW_SSP_TIMING);
> + writel(val, host->base + HW_SSP_TIMING(host));
>
> /* pio */
> host->ssp_pio_words[0] = ctrl0;
> @@ -598,11 +598,11 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host
> *host, unsigned int rate)
>
> ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
>
> - val = readl(host->base + HW_SSP_TIMING);
> + val = readl(host->base + HW_SSP_TIMING(host));
> val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
> val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
> val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
> - writel(val, host->base + HW_SSP_TIMING);
> + writel(val, host->base + HW_SSP_TIMING(host));
>
> host->clk_rate = ssp_sck;
>
> @@ -639,16 +639,17 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host
> *mmc, int enable) writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
> host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_SET);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
>
> - if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ)
> + if (readl(host->base + HW_SSP_STATUS(host)) &
> + BM_SSP_STATUS_SDIO_IRQ)
> mmc_signal_sdio_irq(host->mmc);
>
> } else {
> writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
> host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
> - host->base + HW_SSP_CTRL1 + STMP_OFFSET_REG_CLR);
> + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
> }
>
> spin_unlock_irqrestore(&host->lock, flags);
> @@ -765,8 +766,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
>
> mmc->max_segs = 52;
> mmc->max_blk_size = 1 << 0xf;
> - mmc->max_blk_count = (ssp_is_old()) ? 0xff : 0xffffff;
> - mmc->max_req_size = (ssp_is_old()) ? 0xffff : 0xffffffff;
> + mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
> + mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
> mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
>
> platform_set_drvdata(pdev, mmc);
next prev parent reply other threads:[~2012-05-07 23:58 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 14:43 [PATCH 00/10] Add device tree support for mxs-mmc Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 01/10] mmc: mxs-mmc: use global stmp_device functionality Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:41 ` Marek Vasut
2012-05-07 23:41 ` Marek Vasut
2012-05-07 14:43 ` [PATCH 02/10] mmc: mxs-mmc: let ssp_is_old take host as parameter Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:43 ` Marek Vasut [this message]
2012-05-07 23:43 ` Marek Vasut
2012-05-08 14:32 ` Shawn Guo
2012-05-08 14:32 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 03/10] mmc: mxs-mmc: get rid of the use of cpu_is_xxx Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:46 ` Marek Vasut
2012-05-07 23:46 ` Marek Vasut
2012-05-08 14:35 ` Shawn Guo
2012-05-08 14:35 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 04/10] mmc: mxs-mmc: move header from mach into linux folder Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:47 ` Marek Vasut
2012-05-07 23:47 ` Marek Vasut
2012-05-07 14:43 ` [PATCH 05/10] mmc: mxs-mmc: use devm_* helper to make cleanup simpler Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:49 ` Marek Vasut
2012-05-07 23:49 ` Marek Vasut
2012-05-08 14:38 ` Shawn Guo
2012-05-08 14:38 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 06/10] mmc: mxs-mmc: have dma_channel than dma_res in mxs_mmc_host Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:51 ` Marek Vasut
2012-05-07 23:51 ` Marek Vasut
2012-05-07 14:43 ` [PATCH 07/10] mmc: mxs-mmc: copy wp_gpio in struct mxs_mmc_host Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:53 ` Marek Vasut
2012-05-07 23:53 ` Marek Vasut
2012-05-08 14:40 ` Shawn Guo
2012-05-08 14:40 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 08/10] mmc: mxs-mmc: add device tree support Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 23:58 ` Marek Vasut
2012-05-07 23:58 ` Marek Vasut
2012-05-08 14:43 ` Shawn Guo
2012-05-08 14:43 ` Shawn Guo
2012-05-12 14:44 ` Chris Ball
2012-05-12 14:44 ` Chris Ball
2012-05-13 0:03 ` Shawn Guo
2012-05-13 0:03 ` Shawn Guo
2012-05-13 0:11 ` Chris Ball
2012-05-13 0:11 ` Chris Ball
2012-05-13 0:21 ` Shawn Guo
2012-05-13 0:21 ` Shawn Guo
2012-05-13 0:29 ` Shawn Guo
2012-05-13 0:29 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 09/10] ARM: dts: enable mmc for imx23-evk Shawn Guo
2012-05-07 14:43 ` Shawn Guo
2012-05-07 14:43 ` [PATCH 10/10] ARM: dts: enable mmc for imx28-evk Shawn Guo
2012-05-07 14:43 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201205080143.49806.marex@denx.de \
--to=marex@denx.de \
--cc=cjb@laptop.org \
--cc=dong.aisheng@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.