Re: BLE - multiple connections

[Vinicius Costa Gomes <vinicius.gomes@openbossa.org>]

Hi,

On 12:07 Wed 22 Aug, Ajay KV wrote:
> On 08/17/2012 12:27 PM, Anderson Lizardo wrote:
> >Hi Ajay
> >
> >[your emails to BlueZ mailing list may be getting blocked because you
> >are using HTML. Please fix that on your mail client. Also remember to
> >not top-post]
> >
> >On Fri, Aug 17, 2012 at 7:34 PM, Ajay KV<ajay.kv@globaledgesoft.com>  wrote:
> >>Thanks for your reply.  i have 2 dongles of different made  (iogear and
> >>chirago)  . "Hciconfig hci0 lestates" gives  this following result
> >>
> >>    Supported link layer states:
> >>[...]
> >>
> >>             Here my issue is to  know whether (connected mode + advertising
> >>mode)  is possible at a time . Once A is connected to B (initiator),  i
> >>could not able to enable advertise in  A  (getting command disallowed ) , so
> >>that  device C is not getting the connectable advertising packets on
> >>scanning.
> >I could not see any reason to get "command disallowed" when enabling
> >LE adv. Did you try changing dongle combinations to make sure it is
> >not some hardware issue?
> >
> >Regards,
> 
> Hi,
>         i could not able to figure it out  yet , why its  showing
> this error " command disallowed" . Here im using fedora 13 with
> kernel 2.6.39 . i tried with both dongles , iogear and cirago . But
> the result is same.  i dont think that  its something wrong with
> kernel version, as we  uses hci commands (hciconfig hci0 leadv )
> that directly talks with controller . please clear this issue..

Most probably the controller is in the page scan or inquiry scan state.
Try doing 'hciconfig hci0 noscan', before enabling advertising.

> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


Cheers,
-- 
Vinicius