Re: BLE - multiple connections

[Ajay KV <ajay.kv@globaledgesoft.com>]

On 08/17/2012 12:27 PM, Anderson Lizardo wrote:
> Hi Ajay
>
> [your emails to BlueZ mailing list may be getting blocked because you
> are using HTML. Please fix that on your mail client. Also remember to
> not top-post]
>
> On Fri, Aug 17, 2012 at 7:34 PM, Ajay KV<ajay.kv@globaledgesoft.com>  wrote:
>    
>> Thanks for your reply.  i have 2 dongles of different made  (iogear and
>> chirago)  . "Hciconfig hci0 lestates" gives  this following result
>>
>>     Supported link layer states:
>> [...]
>>
>>              Here my issue is to  know whether (connected mode + advertising
>> mode)  is possible at a time . Once A is connected to B (initiator),  i
>> could not able to enable advertise in  A  (getting command disallowed ) , so
>> that  device C is not getting the connectable advertising packets on
>> scanning.
>>      
> I could not see any reason to get "command disallowed" when enabling
> LE adv. Did you try changing dongle combinations to make sure it is
> not some hardware issue?
>
> Regards,
>    

Hi,
         i could not able to figure it out  yet , why its  showing this 
error " command disallowed" . Here im using fedora 13 with kernel 2.6.39 
. i tried with both dongles , iogear and cirago . But the result is 
same.  i dont think that  its something wrong with kernel version, as 
we  uses hci commands (hciconfig hci0 leadv ) that directly talks with 
controller . please clear this issue..