From: Samuel Ortiz <sameo@linux.intel.com>
To: Sourav Poddar <sourav.poddar@ti.com>
Cc: devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
b-cousson@ti.com, balbi@ti.com, santosh.shilimkar@ti.com
Subject: Re: [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Date: Mon, 1 Oct 2012 14:03:43 +0200 [thread overview]
Message-ID: <20121001120343.GG12231@sortiz-mobl> (raw)
In-Reply-To: <1349089282-22105-1-git-send-email-sourav.poddar@ti.com>
Hi Sourav,
On Mon, Oct 01, 2012 at 04:31:22PM +0530, Sourav Poddar wrote:
> smsc ece1099 is a keyboard scan or gpio expansion device.
> The patch create keypad and gpio expander child for this
> multi function smsc driver.
>
> Tested on omap5430 evm with 3.6-rc6 custom kernel.
>
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> ---
> Changes since v2:
> - Change the cache type, max register assignment
> - remove of_device_table, since i2c based device gets
> probed according to i2c_device_id through dt.
> - Modify the remove function
> - Minor return patch cleanups.
> Documentation/smsc_ece1099.txt | 56 ++++++++++++++++++++
> drivers/mfd/Kconfig | 12 ++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/smsc-ece1099.c | 113 ++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/smsc.h | 109 ++++++++++++++++++++++++++++++++++++++
> 5 files changed, 291 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/smsc_ece1099.txt
> create mode 100644 drivers/mfd/smsc-ece1099.c
> create mode 100644 include/linux/mfd/smsc.h
Applied with a warning fix for the !CONFIG_OF case.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
WARNING: multiple messages have this Message-ID (diff)
From: sameo@linux.intel.com (Samuel Ortiz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Date: Mon, 1 Oct 2012 14:03:43 +0200 [thread overview]
Message-ID: <20121001120343.GG12231@sortiz-mobl> (raw)
In-Reply-To: <1349089282-22105-1-git-send-email-sourav.poddar@ti.com>
Hi Sourav,
On Mon, Oct 01, 2012 at 04:31:22PM +0530, Sourav Poddar wrote:
> smsc ece1099 is a keyboard scan or gpio expansion device.
> The patch create keypad and gpio expander child for this
> multi function smsc driver.
>
> Tested on omap5430 evm with 3.6-rc6 custom kernel.
>
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Felipe Balbi <balbi@ti.com>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> ---
> Changes since v2:
> - Change the cache type, max register assignment
> - remove of_device_table, since i2c based device gets
> probed according to i2c_device_id through dt.
> - Modify the remove function
> - Minor return patch cleanups.
> Documentation/smsc_ece1099.txt | 56 ++++++++++++++++++++
> drivers/mfd/Kconfig | 12 ++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/smsc-ece1099.c | 113 ++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/smsc.h | 109 ++++++++++++++++++++++++++++++++++++++
> 5 files changed, 291 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/smsc_ece1099.txt
> create mode 100644 drivers/mfd/smsc-ece1099.c
> create mode 100644 include/linux/mfd/smsc.h
Applied with a warning fix for the !CONFIG_OF case.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
next prev parent reply other threads:[~2012-10-01 12:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-01 11:01 [PATCHv3 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver Sourav Poddar
2012-10-01 11:01 ` Sourav Poddar
2012-10-01 11:01 ` Sourav Poddar
[not found] ` <1349089282-22105-1-git-send-email-sourav.poddar-l0cyMroinI0@public.gmane.org>
2012-10-01 11:30 ` ABRAHAM, KISHON VIJAY
2012-10-01 11:30 ` ABRAHAM, KISHON VIJAY
2012-10-01 11:30 ` ABRAHAM, KISHON VIJAY
2012-10-01 11:44 ` Mark Brown
2012-10-01 11:44 ` Mark Brown
[not found] ` <20121001114454.GA9170-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2012-10-01 11:53 ` ABRAHAM, KISHON VIJAY
2012-10-01 11:53 ` ABRAHAM, KISHON VIJAY
2012-10-01 11:53 ` ABRAHAM, KISHON VIJAY
2012-10-01 12:09 ` Mark Brown
2012-10-01 12:09 ` Mark Brown
2012-10-01 15:24 ` ABRAHAM, KISHON VIJAY
2012-10-01 15:24 ` ABRAHAM, KISHON VIJAY
2012-10-02 12:38 ` Mark Brown
2012-10-02 12:38 ` Mark Brown
[not found] ` <20121002123856.GX4360-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-10-02 12:43 ` Felipe Balbi
2012-10-02 12:43 ` Felipe Balbi
2012-10-02 12:43 ` Felipe Balbi
2012-10-02 12:58 ` Mark Brown
2012-10-02 12:58 ` Mark Brown
2012-10-02 12:58 ` Mark Brown
[not found] ` <20121002125819.GY4360-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2012-10-02 13:44 ` Felipe Balbi
2012-10-02 13:44 ` Felipe Balbi
2012-10-02 13:44 ` Felipe Balbi
2012-10-02 19:12 ` ABRAHAM, KISHON VIJAY
2012-10-02 19:12 ` ABRAHAM, KISHON VIJAY
2012-10-01 12:03 ` Samuel Ortiz [this message]
2012-10-01 12:03 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121001120343.GG12231@sortiz-mobl \
--to=sameo@linux.intel.com \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=sourav.poddar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.