From: mporter@ti.com (Matt Porter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/7] uio_pruss cleanup and platform support
Date: Mon, 8 Oct 2012 08:03:44 -0400 [thread overview]
Message-ID: <20121008120344.GQ11149@beef> (raw)
In-Reply-To: <5072B190.1060200@ti.com>
On Mon, Oct 08, 2012 at 04:27:20PM +0530, Sekhar Nori wrote:
> On 10/5/2012 10:34 PM, Matt Porter wrote:
>
> > This series enables uio_pruss on DA850 and removes use of the
> > private SRAM API by the driver. The driver previously was not
> > enabled by any platform and the private SRAM API was accessing
> > an invalid SRAM bank.
> >
> > It is regression tested on AM180x EVM with suspend/resume due
> > to the new use of the shared SRAM for both PM and PRUSS. The
> > uio_pruss driver is tested on the same platform using the
> > PRU_memAccessPRUDataRam and PRU_memAccessL3andDDR examples from
> > the PRU userspace tools available from http://www.ti.com/tool/sprc940
>
> I applied patches 2/7, 3/7 and 6/7 of this series for v3.8. I have some
> comments on the board patch. Rest of the patches depend on acceptance of
> 1/7 so I will take them only after that is accepted.
Ok, thanks...and I'll post a v5 of 5/7 and 7/7 and those should be ready
when 1/7 is accepted.
-Matt
WARNING: multiple messages have this Message-ID (diff)
From: Matt Porter <mporter@ti.com>
To: Sekhar Nori <nsekhar@ti.com>
Cc: Linux DaVinci Kernel List
<davinci-linux-open-source@linux.davincidsp.com>,
Russell King <linux@arm.linux.org.uk>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"Hans J. Koch" <hjk@hansjkoch.de>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v4 0/7] uio_pruss cleanup and platform support
Date: Mon, 8 Oct 2012 08:03:44 -0400 [thread overview]
Message-ID: <20121008120344.GQ11149@beef> (raw)
In-Reply-To: <5072B190.1060200@ti.com>
On Mon, Oct 08, 2012 at 04:27:20PM +0530, Sekhar Nori wrote:
> On 10/5/2012 10:34 PM, Matt Porter wrote:
>
> > This series enables uio_pruss on DA850 and removes use of the
> > private SRAM API by the driver. The driver previously was not
> > enabled by any platform and the private SRAM API was accessing
> > an invalid SRAM bank.
> >
> > It is regression tested on AM180x EVM with suspend/resume due
> > to the new use of the shared SRAM for both PM and PRUSS. The
> > uio_pruss driver is tested on the same platform using the
> > PRU_memAccessPRUDataRam and PRU_memAccessL3andDDR examples from
> > the PRU userspace tools available from http://www.ti.com/tool/sprc940
>
> I applied patches 2/7, 3/7 and 6/7 of this series for v3.8. I have some
> comments on the board patch. Rest of the patches depend on acceptance of
> 1/7 so I will take them only after that is accepted.
Ok, thanks...and I'll post a v5 of 5/7 and 7/7 and those should be ready
when 1/7 is accepted.
-Matt
next prev parent reply other threads:[~2012-10-08 12:03 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-05 17:04 [PATCH v4 0/7] uio_pruss cleanup and platform support Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-05 17:04 ` [PATCH v4 1/7] uio: uio_pruss: replace private SRAM API with genalloc Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-18 14:53 ` Matt Porter
2012-10-18 14:53 ` Matt Porter
2012-10-21 23:15 ` Hans J. Koch
2012-10-21 23:15 ` Hans J. Koch
2012-10-05 17:04 ` [PATCH v4 2/7] ARM: davinci: sram: switch from iotable to ioremapped regions Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-05 17:04 ` [PATCH v4 3/7] ARM: davinci: da850: changed SRAM allocator to shared ram Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-05 17:04 ` [PATCH v4 4/7] ARM: davinci: add platform hook to fetch the SRAM pool Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-05 17:04 ` [PATCH v4 5/7] ARM: davinci: add DA850 PRUSS support Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-08 13:53 ` [PATCH v5 5/7] ARM: davinci: da8xx: " Matt Porter
2012-10-08 13:53 ` Matt Porter
2012-10-05 17:04 ` [PATCH v4 6/7] ARM: davinci: clean up DA850 EVM include ordering Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-08 11:04 ` Sekhar Nori
2012-10-08 11:04 ` Sekhar Nori
2012-10-05 17:04 ` [PATCH v4 7/7] ARM: davinci: register pruss_uio device on DA850 EVM Matt Porter
2012-10-05 17:04 ` Matt Porter
2012-10-08 10:53 ` Sekhar Nori
2012-10-08 10:53 ` Sekhar Nori
2012-10-08 11:58 ` Matt Porter
2012-10-08 11:58 ` Matt Porter
2012-10-08 13:54 ` [PATCH v5 7/7] ARM: davinci: da850 evm: register uio_pruss device Matt Porter
2012-10-08 13:54 ` Matt Porter
2012-10-25 11:20 ` Sekhar Nori
2012-10-25 11:20 ` Sekhar Nori
2012-10-08 10:57 ` [PATCH v4 0/7] uio_pruss cleanup and platform support Sekhar Nori
2012-10-08 10:57 ` Sekhar Nori
2012-10-08 12:03 ` Matt Porter [this message]
2012-10-08 12:03 ` Matt Porter
2012-10-24 16:54 ` Matt Porter
2012-10-24 16:54 ` Matt Porter
2012-10-25 11:38 ` Sekhar Nori
2012-10-25 11:38 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121008120344.GQ11149@beef \
--to=mporter@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.