[PATCH v4 1/7] uio: uio_pruss: replace private SRAM API with genalloc

[hjk@hansjkoch.de (Hans J. Koch)]

On Thu, Oct 18, 2012 at 10:53:38AM -0400, Matt Porter wrote:
> On Fri, Oct 05, 2012 at 01:04:40PM -0400, Matt Porter wrote:
> > Remove the use of the private DaVinci SRAM API in favor
> > of genalloc. The pool to be used is provided by platform
> > data.
> > 
> > Signed-off-by: Matt Porter <mporter@ti.com>
> 
> Hans,
> 
> Any additional concerns on this patch?

Not from my side. I was waiting for your discussion to calm down.

> Sekhar is holding off on applying
> parts 4,5,7 for davinci until this is accepted.

You can add my

Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de>

Thanks,
Hans

> 
> Thanks,
> Matt
> 
> > ---
> >  drivers/uio/Kconfig                     |    1 +
> >  drivers/uio/uio_pruss.c                 |   24 +++++++++++++++++-------
> >  include/linux/platform_data/uio_pruss.h |    3 ++-
> >  3 files changed, 20 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > index 6f3ea9b..c48b938 100644
> > --- a/drivers/uio/Kconfig
> > +++ b/drivers/uio/Kconfig
> > @@ -97,6 +97,7 @@ config UIO_NETX
> >  config UIO_PRUSS
> >  	tristate "Texas Instruments PRUSS driver"
> >  	depends on ARCH_DAVINCI_DA850
> > +	select GENERIC_ALLOCATOR
> >  	help
> >  	  PRUSS driver for OMAPL138/DA850/AM18XX devices
> >  	  PRUSS driver requires user space components, examples and user space
> > diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
> > index 33a7a27..f8738de 100644
> > --- a/drivers/uio/uio_pruss.c
> > +++ b/drivers/uio/uio_pruss.c
> > @@ -25,7 +25,7 @@
> >  #include <linux/clk.h>
> >  #include <linux/dma-mapping.h>
> >  #include <linux/slab.h>
> > -#include <mach/sram.h>
> > +#include <linux/genalloc.h>
> >  
> >  #define DRV_NAME "pruss_uio"
> >  #define DRV_VERSION "1.0"
> > @@ -65,10 +65,11 @@ struct uio_pruss_dev {
> >  	dma_addr_t sram_paddr;
> >  	dma_addr_t ddr_paddr;
> >  	void __iomem *prussio_vaddr;
> > -	void *sram_vaddr;
> > +	unsigned long sram_vaddr;
> >  	void *ddr_vaddr;
> >  	unsigned int hostirq_start;
> >  	unsigned int pintc_base;
> > +	struct gen_pool *sram_pool;
> >  };
> >  
> >  static irqreturn_t pruss_handler(int irq, struct uio_info *info)
> > @@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev,
> >  			gdev->ddr_paddr);
> >  	}
> >  	if (gdev->sram_vaddr)
> > -		sram_free(gdev->sram_vaddr, sram_pool_sz);
> > +		gen_pool_free(gdev->sram_pool,
> > +			      gdev->sram_vaddr,
> > +			      sram_pool_sz);
> >  	kfree(gdev->info);
> >  	clk_put(gdev->pruss_clk);
> >  	kfree(gdev);
> > @@ -152,10 +155,17 @@ static int __devinit pruss_probe(struct platform_device *dev)
> >  		goto out_free;
> >  	}
> >  
> > -	gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr));
> > -	if (!gdev->sram_vaddr) {
> > -		dev_err(&dev->dev, "Could not allocate SRAM pool\n");
> > -		goto out_free;
> > +	if (pdata->sram_pool) {
> > +		gdev->sram_pool = pdata->sram_pool;
> > +		gdev->sram_vaddr =
> > +			gen_pool_alloc(gdev->sram_pool, sram_pool_sz);
> > +		if (!gdev->sram_vaddr) {
> > +			dev_err(&dev->dev, "Could not allocate SRAM pool\n");
> > +			goto out_free;
> > +		}
> > +		gdev->sram_paddr =
> > +			gen_pool_virt_to_phys(gdev->sram_pool,
> > +					      gdev->sram_vaddr);
> >  	}
> >  
> >  	gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz,
> > diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h
> > index f39140a..3d47d21 100644
> > --- a/include/linux/platform_data/uio_pruss.h
> > +++ b/include/linux/platform_data/uio_pruss.h
> > @@ -20,6 +20,7 @@
> >  
> >  /* To configure the PRUSS INTC base offset for UIO driver */
> >  struct uio_pruss_pdata {
> > -	u32	pintc_base;
> > +	u32		pintc_base;
> > +	struct gen_pool *sram_pool;
> >  };
> >  #endif /* _UIO_PRUSS_H_ */
> > -- 
> > 1.7.9.5
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>