From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
Date: Sun, 11 Nov 2012 18:22:43 +0100 [thread overview]
Message-ID: <20121111172243.GB821@lunn.ch> (raw)
In-Reply-To: <1352356737-14413-1-git-send-email-m.szyprowski@samsung.com>
On Thu, Nov 08, 2012 at 07:38:57AM +0100, Marek Szyprowski wrote:
> dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless
> the flags provided by the caller. This causes excessive pruning of
> emergency memory pools without any good reason. This patch changes the code
> to correctly use gfp flags provided by the dmapool caller. This should
> solve the dmapool usage on ARM architecture, where GFP_ATOMIC DMA
> allocations can be served only from the special, very limited memory pool.
>
> Reported-by: Soren Moch <smoch@web.de>
> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
I tested this on a Kirkwood QNAP after removing the call to
init_dma_coherent_pool_size().
Andrew
> ---
> mm/dmapool.c | 27 +++++++--------------------
> 1 file changed, 7 insertions(+), 20 deletions(-)
>
> diff --git a/mm/dmapool.c b/mm/dmapool.c
> index c5ab33b..86de9b2 100644
> --- a/mm/dmapool.c
> +++ b/mm/dmapool.c
> @@ -62,8 +62,6 @@ struct dma_page { /* cacheable header for 'allocation' bytes */
> unsigned int offset;
> };
>
> -#define POOL_TIMEOUT_JIFFIES ((100 /* msec */ * HZ) / 1000)
> -
> static DEFINE_MUTEX(pools_lock);
>
> static ssize_t
> @@ -227,7 +225,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
> memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
> #endif
> pool_initialise_page(pool, page);
> - list_add(&page->page_list, &pool->page_list);
> page->in_use = 0;
> page->offset = 0;
> } else {
> @@ -315,30 +312,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> might_sleep_if(mem_flags & __GFP_WAIT);
>
> spin_lock_irqsave(&pool->lock, flags);
> - restart:
> list_for_each_entry(page, &pool->page_list, page_list) {
> if (page->offset < pool->allocation)
> goto ready;
> }
> - page = pool_alloc_page(pool, GFP_ATOMIC);
> - if (!page) {
> - if (mem_flags & __GFP_WAIT) {
> - DECLARE_WAITQUEUE(wait, current);
>
> - __set_current_state(TASK_UNINTERRUPTIBLE);
> - __add_wait_queue(&pool->waitq, &wait);
> - spin_unlock_irqrestore(&pool->lock, flags);
> + /* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
> + spin_unlock_irqrestore(&pool->lock, flags);
>
> - schedule_timeout(POOL_TIMEOUT_JIFFIES);
> + page = pool_alloc_page(pool, mem_flags);
> + if (!page)
> + return NULL;
>
> - spin_lock_irqsave(&pool->lock, flags);
> - __remove_wait_queue(&pool->waitq, &wait);
> - goto restart;
> - }
> - retval = NULL;
> - goto done;
> - }
> + spin_lock_irqsave(&pool->lock, flags);
>
> + list_add(&page->page_list, &pool->page_list);
> ready:
> page->in_use++;
> offset = page->offset;
> @@ -348,7 +336,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> #ifdef DMAPOOL_DEBUG
> memset(retval, POOL_POISON_ALLOCATED, pool->size);
> #endif
> - done:
> spin_unlock_irqrestore(&pool->lock, flags);
> return retval;
> }
> --
> 1.7.9.5
>
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew@lunn.ch>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
linaro-mm-sig@lists.linaro.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Arnd Bergmann <arnd@arndb.de>, Soren Moch <smoch@web.de>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
Date: Sun, 11 Nov 2012 18:22:43 +0100 [thread overview]
Message-ID: <20121111172243.GB821@lunn.ch> (raw)
In-Reply-To: <1352356737-14413-1-git-send-email-m.szyprowski@samsung.com>
On Thu, Nov 08, 2012 at 07:38:57AM +0100, Marek Szyprowski wrote:
> dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless
> the flags provided by the caller. This causes excessive pruning of
> emergency memory pools without any good reason. This patch changes the code
> to correctly use gfp flags provided by the dmapool caller. This should
> solve the dmapool usage on ARM architecture, where GFP_ATOMIC DMA
> allocations can be served only from the special, very limited memory pool.
>
> Reported-by: Soren Moch <smoch@web.de>
> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
I tested this on a Kirkwood QNAP after removing the call to
init_dma_coherent_pool_size().
Andrew
> ---
> mm/dmapool.c | 27 +++++++--------------------
> 1 file changed, 7 insertions(+), 20 deletions(-)
>
> diff --git a/mm/dmapool.c b/mm/dmapool.c
> index c5ab33b..86de9b2 100644
> --- a/mm/dmapool.c
> +++ b/mm/dmapool.c
> @@ -62,8 +62,6 @@ struct dma_page { /* cacheable header for 'allocation' bytes */
> unsigned int offset;
> };
>
> -#define POOL_TIMEOUT_JIFFIES ((100 /* msec */ * HZ) / 1000)
> -
> static DEFINE_MUTEX(pools_lock);
>
> static ssize_t
> @@ -227,7 +225,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
> memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
> #endif
> pool_initialise_page(pool, page);
> - list_add(&page->page_list, &pool->page_list);
> page->in_use = 0;
> page->offset = 0;
> } else {
> @@ -315,30 +312,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> might_sleep_if(mem_flags & __GFP_WAIT);
>
> spin_lock_irqsave(&pool->lock, flags);
> - restart:
> list_for_each_entry(page, &pool->page_list, page_list) {
> if (page->offset < pool->allocation)
> goto ready;
> }
> - page = pool_alloc_page(pool, GFP_ATOMIC);
> - if (!page) {
> - if (mem_flags & __GFP_WAIT) {
> - DECLARE_WAITQUEUE(wait, current);
>
> - __set_current_state(TASK_UNINTERRUPTIBLE);
> - __add_wait_queue(&pool->waitq, &wait);
> - spin_unlock_irqrestore(&pool->lock, flags);
> + /* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
> + spin_unlock_irqrestore(&pool->lock, flags);
>
> - schedule_timeout(POOL_TIMEOUT_JIFFIES);
> + page = pool_alloc_page(pool, mem_flags);
> + if (!page)
> + return NULL;
>
> - spin_lock_irqsave(&pool->lock, flags);
> - __remove_wait_queue(&pool->waitq, &wait);
> - goto restart;
> - }
> - retval = NULL;
> - goto done;
> - }
> + spin_lock_irqsave(&pool->lock, flags);
>
> + list_add(&page->page_list, &pool->page_list);
> ready:
> page->in_use++;
> offset = page->offset;
> @@ -348,7 +336,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> #ifdef DMAPOOL_DEBUG
> memset(retval, POOL_POISON_ALLOCATED, pool->size);
> #endif
> - done:
> spin_unlock_irqrestore(&pool->lock, flags);
> return retval;
> }
> --
> 1.7.9.5
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew@lunn.ch>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
linaro-mm-sig@lists.linaro.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Arnd Bergmann <arnd@arndb.de>, Soren Moch <smoch@web.de>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
Date: Sun, 11 Nov 2012 18:22:43 +0100 [thread overview]
Message-ID: <20121111172243.GB821@lunn.ch> (raw)
In-Reply-To: <1352356737-14413-1-git-send-email-m.szyprowski@samsung.com>
On Thu, Nov 08, 2012 at 07:38:57AM +0100, Marek Szyprowski wrote:
> dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag, regardless
> the flags provided by the caller. This causes excessive pruning of
> emergency memory pools without any good reason. This patch changes the code
> to correctly use gfp flags provided by the dmapool caller. This should
> solve the dmapool usage on ARM architecture, where GFP_ATOMIC DMA
> allocations can be served only from the special, very limited memory pool.
>
> Reported-by: Soren Moch <smoch@web.de>
> Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
I tested this on a Kirkwood QNAP after removing the call to
init_dma_coherent_pool_size().
Andrew
> ---
> mm/dmapool.c | 27 +++++++--------------------
> 1 file changed, 7 insertions(+), 20 deletions(-)
>
> diff --git a/mm/dmapool.c b/mm/dmapool.c
> index c5ab33b..86de9b2 100644
> --- a/mm/dmapool.c
> +++ b/mm/dmapool.c
> @@ -62,8 +62,6 @@ struct dma_page { /* cacheable header for 'allocation' bytes */
> unsigned int offset;
> };
>
> -#define POOL_TIMEOUT_JIFFIES ((100 /* msec */ * HZ) / 1000)
> -
> static DEFINE_MUTEX(pools_lock);
>
> static ssize_t
> @@ -227,7 +225,6 @@ static struct dma_page *pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
> memset(page->vaddr, POOL_POISON_FREED, pool->allocation);
> #endif
> pool_initialise_page(pool, page);
> - list_add(&page->page_list, &pool->page_list);
> page->in_use = 0;
> page->offset = 0;
> } else {
> @@ -315,30 +312,21 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> might_sleep_if(mem_flags & __GFP_WAIT);
>
> spin_lock_irqsave(&pool->lock, flags);
> - restart:
> list_for_each_entry(page, &pool->page_list, page_list) {
> if (page->offset < pool->allocation)
> goto ready;
> }
> - page = pool_alloc_page(pool, GFP_ATOMIC);
> - if (!page) {
> - if (mem_flags & __GFP_WAIT) {
> - DECLARE_WAITQUEUE(wait, current);
>
> - __set_current_state(TASK_UNINTERRUPTIBLE);
> - __add_wait_queue(&pool->waitq, &wait);
> - spin_unlock_irqrestore(&pool->lock, flags);
> + /* pool_alloc_page() might sleep, so temporarily drop &pool->lock */
> + spin_unlock_irqrestore(&pool->lock, flags);
>
> - schedule_timeout(POOL_TIMEOUT_JIFFIES);
> + page = pool_alloc_page(pool, mem_flags);
> + if (!page)
> + return NULL;
>
> - spin_lock_irqsave(&pool->lock, flags);
> - __remove_wait_queue(&pool->waitq, &wait);
> - goto restart;
> - }
> - retval = NULL;
> - goto done;
> - }
> + spin_lock_irqsave(&pool->lock, flags);
>
> + list_add(&page->page_list, &pool->page_list);
> ready:
> page->in_use++;
> offset = page->offset;
> @@ -348,7 +336,6 @@ void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
> #ifdef DMAPOOL_DEBUG
> memset(retval, POOL_POISON_ALLOCATED, pool->size);
> #endif
> - done:
> spin_unlock_irqrestore(&pool->lock, flags);
> return retval;
> }
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2012-11-11 17:22 UTC|newest]
Thread overview: 181+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-08 6:38 [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls Marek Szyprowski
2012-11-08 6:38 ` Marek Szyprowski
2012-11-08 6:38 ` Marek Szyprowski
2012-11-11 17:22 ` Andrew Lunn [this message]
2012-11-11 17:22 ` Andrew Lunn
2012-11-11 17:22 ` Andrew Lunn
2012-11-12 9:48 ` Soeren Moch
2012-11-12 9:48 ` Soeren Moch
2012-11-12 9:48 ` Soeren Moch
2012-11-12 10:38 ` Andrew Lunn
2012-11-12 10:38 ` Andrew Lunn
2012-11-12 10:38 ` Andrew Lunn
2012-11-12 11:03 ` Soeren Moch
2012-11-12 11:03 ` Soeren Moch
2012-11-12 11:03 ` Soeren Moch
2012-11-11 17:31 ` [PATCH] ARM: Orion: Remove redundent init_dma_coherent_pool_size() Andrew Lunn
2012-11-19 0:20 ` Jason Cooper
2013-04-17 20:38 ` Jason Cooper
2013-04-17 20:49 ` Gregory CLEMENT
2013-05-13 19:38 ` Jason Cooper
2012-11-19 0:18 ` [PATCH] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls Jason Cooper
2012-11-19 0:18 ` Jason Cooper
2012-11-19 0:18 ` Jason Cooper
2012-11-19 22:48 ` Andrew Morton
2012-11-19 22:48 ` Andrew Morton
2012-11-19 22:48 ` Andrew Morton
2012-11-20 10:48 ` Marek Szyprowski
2012-11-20 10:48 ` Marek Szyprowski
2012-11-20 10:48 ` Marek Szyprowski
2012-11-20 19:52 ` Andrew Morton
2012-11-20 19:52 ` Andrew Morton
2012-11-20 19:52 ` Andrew Morton
2012-11-20 14:31 ` [PATCH v2] " Marek Szyprowski
2012-11-20 14:31 ` Marek Szyprowski
2012-11-20 14:31 ` Marek Szyprowski
2012-11-20 19:33 ` Andrew Morton
2012-11-20 19:33 ` Andrew Morton
2012-11-20 19:33 ` Andrew Morton
2012-11-20 20:27 ` Jason Cooper
2012-11-20 20:27 ` Jason Cooper
2012-11-20 20:27 ` Jason Cooper
2012-11-21 8:08 ` Marek Szyprowski
2012-11-21 8:08 ` Marek Szyprowski
2012-11-21 8:08 ` Marek Szyprowski
2012-11-21 8:36 ` Andrew Morton
2012-11-21 8:36 ` Andrew Morton
2012-11-21 8:36 ` Andrew Morton
2012-11-21 9:20 ` Marek Szyprowski
2012-11-21 9:20 ` Marek Szyprowski
2012-11-21 9:20 ` Marek Szyprowski
2012-11-21 19:17 ` Andrew Morton
2012-11-21 19:17 ` Andrew Morton
2012-11-21 19:17 ` Andrew Morton
2012-11-22 12:55 ` Marek Szyprowski
2012-11-22 12:55 ` Marek Szyprowski
2012-11-22 12:55 ` Marek Szyprowski
2013-01-14 11:56 ` Soeren Moch
2013-01-14 11:56 ` Soeren Moch
2013-01-14 11:56 ` Soeren Moch
2013-01-15 16:56 ` Jason Cooper
2013-01-15 16:56 ` Jason Cooper
2013-01-15 16:56 ` Jason Cooper
2013-01-15 17:50 ` Greg KH
2013-01-15 17:50 ` Greg KH
2013-01-15 17:50 ` Greg KH
2013-01-15 20:16 ` Jason Cooper
2013-01-15 20:16 ` Jason Cooper
2013-01-15 20:16 ` Jason Cooper
2013-01-15 21:56 ` Jason Cooper
2013-01-15 21:56 ` Jason Cooper
2013-01-15 21:56 ` Jason Cooper
2013-01-16 0:17 ` Soeren Moch
2013-01-16 0:17 ` Soeren Moch
2013-01-16 0:17 ` Soeren Moch
2013-01-16 2:40 ` Jason Cooper
2013-01-16 2:40 ` Jason Cooper
2013-01-16 2:40 ` Jason Cooper
2013-01-16 3:24 ` Soeren Moch
2013-01-16 3:24 ` Soeren Moch
2013-01-16 3:24 ` Soeren Moch
2013-01-16 8:55 ` Soeren Moch
2013-01-16 8:55 ` Soeren Moch
2013-01-16 8:55 ` Soeren Moch
2013-01-16 15:50 ` [PATCH] ata: sata_mv: fix sg_tbl_pool alignment Jason Cooper
2013-01-16 15:50 ` Jason Cooper
2013-01-16 15:50 ` Jason Cooper
2013-01-16 17:05 ` Soeren Moch
2013-01-16 17:05 ` Soeren Moch
2013-01-16 17:05 ` Soeren Moch
2013-01-16 17:52 ` Jason Cooper
2013-01-16 17:52 ` Jason Cooper
2013-01-16 17:52 ` Jason Cooper
2013-01-16 18:35 ` Jason Cooper
2013-01-16 18:35 ` Jason Cooper
2013-01-16 18:35 ` Jason Cooper
2013-01-16 22:26 ` Soeren Moch
2013-01-16 22:26 ` Soeren Moch
2013-01-16 22:26 ` Soeren Moch
2013-01-16 23:10 ` Soeren Moch
2013-01-16 23:10 ` Soeren Moch
2013-01-16 23:10 ` Soeren Moch
2013-01-17 9:11 ` Soeren Moch
2013-01-17 9:11 ` Soeren Moch
2013-01-17 9:11 ` Soeren Moch
2013-01-16 17:32 ` [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls Soeren Moch
2013-01-16 17:32 ` Soeren Moch
2013-01-16 17:32 ` Soeren Moch
2013-01-16 17:47 ` Jason Cooper
2013-01-16 17:47 ` Jason Cooper
2013-01-16 17:47 ` Jason Cooper
2013-01-16 22:36 ` Soeren Moch
2013-01-16 22:36 ` Soeren Moch
2013-01-16 22:36 ` Soeren Moch
2013-01-17 10:49 ` Arnd Bergmann
2013-01-17 10:49 ` Arnd Bergmann
2013-01-17 10:49 ` Arnd Bergmann
2013-01-17 13:47 ` Soeren Moch
2013-01-17 13:47 ` Soeren Moch
2013-01-17 13:47 ` Soeren Moch
2013-01-17 20:26 ` Arnd Bergmann
2013-01-17 20:26 ` Arnd Bergmann
2013-01-17 20:26 ` Arnd Bergmann
2013-01-19 15:29 ` Soeren Moch
2013-01-19 15:29 ` Soeren Moch
2013-01-19 18:59 ` Andrew Lunn
2013-01-19 18:59 ` Andrew Lunn
2013-01-19 18:59 ` Andrew Lunn
2013-01-23 15:30 ` Soeren Moch
2013-01-23 15:30 ` Soeren Moch
2013-01-23 15:30 ` Soeren Moch
2013-01-23 16:25 ` Andrew Lunn
2013-01-23 16:25 ` Andrew Lunn
2013-01-23 16:25 ` Andrew Lunn
2013-01-23 17:07 ` Soeren Moch
2013-01-23 17:07 ` Soeren Moch
2013-01-23 17:07 ` Soeren Moch
2013-01-23 17:20 ` Soeren Moch
2013-01-23 17:20 ` Soeren Moch
2013-01-23 17:20 ` Soeren Moch
2013-01-23 18:10 ` Andrew Lunn
2013-01-23 18:10 ` Andrew Lunn
2013-01-23 18:10 ` Andrew Lunn
2013-01-28 20:59 ` Soeren Moch
2013-01-28 20:59 ` Soeren Moch
2013-01-28 20:59 ` Soeren Moch
2013-01-29 0:13 ` Jason Cooper
2013-01-29 0:13 ` Jason Cooper
2013-01-29 0:13 ` Jason Cooper
2013-01-29 11:02 ` Andrew Lunn
2013-01-29 11:02 ` Andrew Lunn
2013-01-29 11:02 ` Andrew Lunn
2013-01-29 11:50 ` Soeren Moch
2013-01-29 11:50 ` Soeren Moch
2013-01-29 11:50 ` Soeren Moch
2013-01-19 20:05 ` Arnd Bergmann
2013-01-19 20:05 ` Arnd Bergmann
2013-01-19 20:05 ` Arnd Bergmann
2013-01-21 15:01 ` Soeren Moch
2013-01-21 15:01 ` Soeren Moch
2013-01-21 15:01 ` Soeren Moch
2013-01-21 18:55 ` Arnd Bergmann
2013-01-21 18:55 ` Arnd Bergmann
2013-01-21 18:55 ` Arnd Bergmann
2013-01-21 21:01 ` Greg KH
2013-01-21 21:01 ` Greg KH
2013-01-21 21:01 ` Greg KH
2013-01-22 18:13 ` Arnd Bergmann
2013-01-22 18:13 ` Arnd Bergmann
2013-01-22 18:13 ` Arnd Bergmann
2013-01-23 14:37 ` Soeren Moch
2013-01-23 14:37 ` Soeren Moch
2013-01-23 14:37 ` Soeren Moch
2013-01-19 16:24 ` Andrew Lunn
2013-01-19 16:24 ` Andrew Lunn
2013-01-19 16:24 ` Andrew Lunn
2013-01-15 20:05 ` Sebastian Hesselbarth
2013-01-15 20:05 ` Sebastian Hesselbarth
2013-01-15 20:05 ` Sebastian Hesselbarth
2013-01-15 20:19 ` Jason Cooper
2013-01-15 20:19 ` Jason Cooper
2013-01-15 20:19 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121111172243.GB821@lunn.ch \
--to=andrew@lunn.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.