[PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls

[sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)]

On 01/15/2013 05:56 PM, Jason Cooper wrote:
> Greg,
>
> I've added you to the this thread hoping for a little insight into USB
> drivers and their use of coherent and GFP_ATOMIC.  Am I barking up the
> wrong tree by looking a the drivers?
>
> On Mon, Jan 14, 2013 at 12:56:57PM +0100, Soeren Moch wrote:
>> On 20.11.2012 15:31, Marek Szyprowski wrote:
>>> dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag,
>>> regardless the flags provided by the caller. This causes excessive
>>> pruning of emergency memory pools without any good reason. Additionaly,
>>> on ARM architecture any driver which is using dmapools will sooner or
>>> later  trigger the following error:
>>> "ERROR: 256 KiB atomic DMA coherent pool is too small!
>>> Please increase it with coherent_pool= kernel parameter!".
>>> Increasing the coherent pool size usually doesn't help much and only
>>> delays such error, because all GFP_ATOMIC DMA allocations are always
>>> served from the special, very limited memory pool.
>>>
>>> This patch changes the dmapool code to correctly use gfp flags provided
>>> by the dmapool caller.
>>>
>>> Reported-by: Soeren Moch<smoch@web.de>
>>> Reported-by: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>
>>> Signed-off-by: Marek Szyprowski<m.szyprowski@samsung.com>
>>> Tested-by: Andrew Lunn<andrew@lunn.ch>
>>> Tested-by: Soeren Moch<smoch@web.de>
>>
>> Now I tested linux-3.7.1 (this patch is included there) on my Marvell
>> Kirkwood system. I still see
>>
>>    ERROR: 1024 KiB atomic DMA coherent pool is too small!
>>    Please increase it with coherent_pool= kernel parameter!
>>
>> after several hours of runtime under heavy load with SATA and
>> DVB-Sticks (em28xx / drxk and dib0700).
>
> Could you try running the system w/o the em28xx stick and see how it
> goes with v3.7.1?

Jason,

can you point out what you think we should be looking for?

I grep'd for 'GFP_' in  drivers/media/usb and especially for dvb-usb
(dib0700) it looks like most of the buffers in usb-urb.c are allocated
GFP_ATOMIC. em28xx also allocates some of the buffers atomic.

If we look for a mem leak in one of the above drivers (including sata_mv),
is there an easy way to keep track of allocated and freed kernel memory?

Sebastian