All of lore.kernel.org
 help / color / mirror / Atom feed
* [B.A.T.M.A.N.] [RFC 0/6] CATWOMAN: Network coding in batman-adv
@ 2012-11-19 13:21 Martin Hundebøll
  2012-11-19 13:21 ` [B.A.T.M.A.N.] [RFC 1/6] batman-adv: Add the initial code for network coding Martin Hundebøll
                   ` (5 more replies)
  0 siblings, 6 replies; 12+ messages in thread
From: Martin Hundebøll @ 2012-11-19 13:21 UTC (permalink / raw)
  To: b.a.t.m.a.n; +Cc: Martin Hundebøll

I hereby bring you network coding in batman-adv. This allows a relay
to send two packets (to two destinations) in a single transmission.
Tests[1] have shown an increase in throughput up to 1.6 under the right
circumstances.

For this to work, you will need to compile batman-adv with
CONFIG_BATMAN_ADV_NC=y and a wireless interface with working
promiscuous mode. The rest is taken care of by batman-adv and the
following patches.

[1] http://www.open-mesh.org/projects/open-mesh/wiki/2011-08-18-network-coding-first-steps

Martin Hundebøll (6):
  batman-adv: Add the initial code for network coding.
  batman-adv: Detect coding nodes and remove these after timeout
  batman-adv: Buffer unicast packets before forward.
  batman-adv: Code and transmit packets if possible.
  batman-adv: Save overheard and tx packets for decoding.
  batman-adv: Receive coded packets and decode them.

 Makefile               |    2 +
 Makefile.kbuild        |    1 +
 bat_iv_ogm.c           |    5 +
 compat.c               |   10 +
 compat.h               |    1 +
 debugfs.c              |   18 +
 gen-compat-autoconf.sh |    1 +
 main.c                 |    6 +
 main.h                 |   13 +-
 network-coding.c       | 1818 ++++++++++++++++++++++++++++++++++++++++++++++++
 network-coding.h       |  122 ++++
 originator.c           |    6 +
 packet.h               |   33 +
 routing.c              |   26 +-
 send.c                 |    5 +
 soft-interface.c       |   14 +
 sysfs-class-net-mesh   |    8 +
 sysfs.c                |    6 +
 types.h                |  123 ++++
 19 files changed, 2209 insertions(+), 9 deletions(-)
 create mode 100644 network-coding.c
 create mode 100644 network-coding.h

-- 
1.8.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2012-11-27  8:24 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-19 13:21 [B.A.T.M.A.N.] [RFC 0/6] CATWOMAN: Network coding in batman-adv Martin Hundebøll
2012-11-19 13:21 ` [B.A.T.M.A.N.] [RFC 1/6] batman-adv: Add the initial code for network coding Martin Hundebøll
2012-11-26  0:23   ` Antonio Quartulli
2012-11-27  8:24     ` Martin Hundebøll
2012-11-19 13:22 ` [B.A.T.M.A.N.] [RFC 2/6] batman-adv: Detect coding nodes and remove these after timeout Martin Hundebøll
2012-11-26  0:41   ` Antonio Quartulli
2012-11-26  1:15     ` Marek Lindner
2012-11-26  9:34       ` Antonio Quartulli
2012-11-19 13:22 ` [B.A.T.M.A.N.] [RFC 3/6] batman-adv: Buffer unicast packets before forward Martin Hundebøll
2012-11-19 13:22 ` [B.A.T.M.A.N.] [RFC 4/6] batman-adv: Code and transmit packets if possible Martin Hundebøll
2012-11-19 13:22 ` [B.A.T.M.A.N.] [RFC 5/6] batman-adv: Save overheard and tx packets for decoding Martin Hundebøll
2012-11-19 13:22 ` [B.A.T.M.A.N.] [RFC 6/6] batman-adv: Receive coded packets and decode them Martin Hundebøll

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.