From: Anton Vorontsov <anton.vorontsov@linaro.org>
To: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>, Mel Gorman <mgorman@suse.de>,
Glauber Costa <glommer@parallels.com>,
Michal Hocko <mhocko@suse.cz>,
"Kirill A. Shutemov" <kirill@shutemov.name>,
Luiz Capitulino <lcapitulino@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Greg Thelen <gthelen@google.com>,
Leonid Moiseichuk <leonid.moiseichuk@nokia.com>,
KOSAKI Motohiro <kosaki.motohiro@gmail.com>,
Minchan Kim <minchan@kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
John Stultz <john.stultz@linaro.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linaro-kernel@lists.linaro.org, patches@linaro.org,
kernel-team@android.com
Subject: [PATCH 0/2] Mempressure cgroup
Date: Fri, 4 Jan 2013 00:27:52 -0800 [thread overview]
Message-ID: <20130104082751.GA22227@lizard.gateway.2wire.net> (raw)
Hi all,
Here is another round of the mempressure cgroup. This time I dared to
remove the RFC tag. :)
In this revision:
- Addressed most of Kirill Shutemov's comments. I didn't bother
implementing per-level lists, though. It would needlessly complicate the
logic, and the gain would be only visible with lots of watchers (which
we don't have for our use-cases). But it is always an option to add the
feature;
- I've split the pach into two: 'shrinker' and 'levels' parts. While the
full-fledged userland shrinker is an interesting idea, we don't have any
users ready for it, so I won't advocate for it too much.
And since at least Kirill has some concerns about it, I don't want the
shrinker to block the pressure levels.
So, these are now separate. At some point, I'd like to both of them
merged, but if anything, let's discuss them separately;
- Rebased onto v3.8-rc2.
RFC v2 (http://lkml.org/lkml/2012/12/10/128):
- Added documentation, describes APIs and the purpose;
- Implemented shrinker interface, this is based on Andrew's idea and
supersedes my "balance" level idea;
- The shrinker interface comes with a stress-test utility, that is what
Andrew was also asking for. A simple app that we can run and see if the
thing works as expected;
- Added reclaimer's target_mem_cgroup handling;
- As promised, added support for multiple listeners, and fixed some other
comments on the previous RFC.
RFC v1 (http://lkml.org/lkml/2012/11/28/109)
--
Documentation/cgroups/mempressure.txt | 97 +++++
Documentation/cgroups/mempressure_test.c | 213 ++++++++++
include/linux/cgroup_subsys.h | 6 +
include/linux/vmstat.h | 11 +
init/Kconfig | 13 +
mm/Makefile | 1 +
mm/mempressure.c | 487 +++++++++++++++++++++++
mm/vmscan.c | 4 +
8 files changed, 832 insertions(+)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Anton Vorontsov <anton.vorontsov@linaro.org>
To: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>, Mel Gorman <mgorman@suse.de>,
Glauber Costa <glommer@parallels.com>,
Michal Hocko <mhocko@suse.cz>,
"Kirill A. Shutemov" <kirill@shutemov.name>,
Luiz Capitulino <lcapitulino@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Greg Thelen <gthelen@google.com>,
Leonid Moiseichuk <leonid.moiseichuk@nokia.com>,
KOSAKI Motohiro <kosaki.motohiro@gmail.com>,
Minchan Kim <minchan@kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
John Stultz <john.stultz@linaro.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linaro-kernel@lists.linaro.org, patches@linaro.org,
kernel-team@android.com
Subject: [PATCH 0/2] Mempressure cgroup
Date: Fri, 4 Jan 2013 00:27:52 -0800 [thread overview]
Message-ID: <20130104082751.GA22227@lizard.gateway.2wire.net> (raw)
Hi all,
Here is another round of the mempressure cgroup. This time I dared to
remove the RFC tag. :)
In this revision:
- Addressed most of Kirill Shutemov's comments. I didn't bother
implementing per-level lists, though. It would needlessly complicate the
logic, and the gain would be only visible with lots of watchers (which
we don't have for our use-cases). But it is always an option to add the
feature;
- I've split the pach into two: 'shrinker' and 'levels' parts. While the
full-fledged userland shrinker is an interesting idea, we don't have any
users ready for it, so I won't advocate for it too much.
And since at least Kirill has some concerns about it, I don't want the
shrinker to block the pressure levels.
So, these are now separate. At some point, I'd like to both of them
merged, but if anything, let's discuss them separately;
- Rebased onto v3.8-rc2.
RFC v2 (http://lkml.org/lkml/2012/12/10/128):
- Added documentation, describes APIs and the purpose;
- Implemented shrinker interface, this is based on Andrew's idea and
supersedes my "balance" level idea;
- The shrinker interface comes with a stress-test utility, that is what
Andrew was also asking for. A simple app that we can run and see if the
thing works as expected;
- Added reclaimer's target_mem_cgroup handling;
- As promised, added support for multiple listeners, and fixed some other
comments on the previous RFC.
RFC v1 (http://lkml.org/lkml/2012/11/28/109)
--
Documentation/cgroups/mempressure.txt | 97 +++++
Documentation/cgroups/mempressure_test.c | 213 ++++++++++
include/linux/cgroup_subsys.h | 6 +
include/linux/vmstat.h | 11 +
init/Kconfig | 13 +
mm/Makefile | 1 +
mm/mempressure.c | 487 +++++++++++++++++++++++
mm/vmscan.c | 4 +
8 files changed, 832 insertions(+)
next reply other threads:[~2013-01-04 8:31 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 8:27 Anton Vorontsov [this message]
2013-01-04 8:27 ` [PATCH 0/2] Mempressure cgroup Anton Vorontsov
2013-01-04 8:29 ` [PATCH 1/2] Add mempressure cgroup Anton Vorontsov
2013-01-04 8:29 ` Anton Vorontsov
2013-01-04 15:05 ` Kirill A. Shutemov
2013-01-04 15:05 ` Kirill A. Shutemov
2013-01-07 8:51 ` Kamezawa Hiroyuki
2013-01-07 8:51 ` Kamezawa Hiroyuki
2013-01-08 7:29 ` Anton Vorontsov
2013-01-08 7:29 ` Anton Vorontsov
2013-01-08 7:57 ` leonid.moiseichuk
2013-01-08 7:57 ` leonid.moiseichuk
2013-01-08 8:24 ` Kamezawa Hiroyuki
2013-01-08 8:24 ` Kamezawa Hiroyuki
2013-01-08 8:49 ` Minchan Kim
2013-01-08 8:49 ` Minchan Kim
2013-01-09 22:14 ` Anton Vorontsov
2013-01-09 22:14 ` Anton Vorontsov
2013-01-11 5:12 ` Minchan Kim
2013-01-11 5:12 ` Minchan Kim
2013-01-11 5:38 ` Anton Vorontsov
2013-01-11 5:38 ` Anton Vorontsov
2013-01-11 5:56 ` Minchan Kim
2013-01-11 5:56 ` Minchan Kim
2013-01-11 6:09 ` Anton Vorontsov
2013-01-11 6:09 ` Anton Vorontsov
2013-01-08 21:44 ` Andrew Morton
2013-01-08 21:44 ` Andrew Morton
2013-01-09 14:10 ` Glauber Costa
2013-01-09 14:10 ` Glauber Costa
2013-01-09 20:28 ` Andrew Morton
2013-01-09 20:28 ` Andrew Morton
2013-01-09 8:56 ` Glauber Costa
2013-01-09 8:56 ` Glauber Costa
2013-01-09 9:15 ` Andrew Morton
2013-01-09 9:15 ` Andrew Morton
2013-01-09 13:43 ` Glauber Costa
2013-01-09 13:43 ` Glauber Costa
2013-01-09 20:37 ` Tejun Heo
2013-01-09 20:37 ` Tejun Heo
2013-01-09 20:39 ` Tejun Heo
2013-01-09 20:39 ` Tejun Heo
2013-01-09 21:20 ` Glauber Costa
2013-01-09 21:20 ` Glauber Costa
2013-01-09 21:36 ` Anton Vorontsov
2013-01-09 21:36 ` Anton Vorontsov
2013-01-09 21:55 ` Tejun Heo
2013-01-09 21:55 ` Tejun Heo
2013-01-09 22:04 ` Tejun Heo
2013-01-09 22:04 ` Tejun Heo
2013-01-09 22:06 ` Anton Vorontsov
2013-01-09 22:06 ` Anton Vorontsov
2013-01-09 22:21 ` Tejun Heo
2013-01-09 22:21 ` Tejun Heo
2013-01-10 7:18 ` Glauber Costa
2013-01-10 7:18 ` Glauber Costa
2013-01-13 8:50 ` Simon Jeons
2013-01-13 8:50 ` Simon Jeons
2013-01-13 8:52 ` Wanpeng Li
2013-01-13 8:52 ` Wanpeng Li
2013-01-04 8:29 ` [PATCH 2/2] Add shrinker interface for " Anton Vorontsov
2013-01-04 8:29 ` Anton Vorontsov
2013-01-11 19:13 ` [PATCH 0/2] Mempressure cgroup Luiz Capitulino
2013-01-11 19:13 ` Luiz Capitulino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130104082751.GA22227@lizard.gateway.2wire.net \
--to=anton.vorontsov@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=b.zolnierkie@samsung.com \
--cc=glommer@parallels.com \
--cc=gthelen@google.com \
--cc=john.stultz@linaro.org \
--cc=kernel-team@android.com \
--cc=kirill@shutemov.name \
--cc=kosaki.motohiro@gmail.com \
--cc=lcapitulino@redhat.com \
--cc=leonid.moiseichuk@nokia.com \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=minchan@kernel.org \
--cc=patches@linaro.org \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.