* [PATCH] ARM: ux500: regulators: Remove misleading comment
@ 2013-05-22 13:06 ` Lee Jones
0 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2013-05-22 13:06 UTC (permalink / raw)
To: linux-arm-kernel
This patch removes a comment which explains that the ab8505 platform
uses the same initialisation settings as the ab8500. Well when this
changed and the ab8505 started using its own set of initialisation
values, someone forgot to remove it.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 33c353b..b34441b 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -996,7 +996,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
.num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
};
-/* Use the AB8500 init settings for AB8505 as they are the same right now */
struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
.reg_init = ab8505_reg_init,
.num_reg_init = ARRAY_SIZE(ab8505_reg_init),
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] ARM: ux500: regulators: Remove misleading comment
@ 2013-05-22 13:06 ` Lee Jones
0 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2013-05-22 13:06 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel
Cc: arnd, linus.walleij, srinidhi.kasagar, Lee Jones
This patch removes a comment which explains that the ab8505 platform
uses the same initialisation settings as the ab8500. Well when this
changed and the ab8505 started using its own set of initialisation
values, someone forgot to remove it.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 33c353b..b34441b 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -996,7 +996,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
.num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
};
-/* Use the AB8500 init settings for AB8505 as they are the same right now */
struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
.reg_init = ab8505_reg_init,
.num_reg_init = ARRAY_SIZE(ab8505_reg_init),
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] ARM: ux500: regulators: Remove misleading comment
2013-05-22 13:06 ` Lee Jones
@ 2013-05-24 11:26 ` Lee Jones
-1 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2013-05-24 11:26 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 22 May 2013, Lee Jones wrote:
> This patch removes a comment which explains that the ab8505 platform
> uses the same initialisation settings as the ab8500. Well when this
> changed and the ab8505 started using its own set of initialisation
> values, someone forgot to remove it.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> arch/arm/mach-ux500/board-mop500-regulators.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
> index 33c353b..b34441b 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.c
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.c
> @@ -996,7 +996,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
> .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
> };
>
> -/* Use the AB8500 init settings for AB8505 as they are the same right now */
> struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
> .reg_init = ab8505_reg_init,
> .num_reg_init = ARRAY_SIZE(ab8505_reg_init),
This patch still stands though.
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] ARM: ux500: regulators: Remove misleading comment
@ 2013-05-24 11:26 ` Lee Jones
0 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2013-05-24 11:26 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel; +Cc: arnd, linus.walleij, srinidhi.kasagar
On Wed, 22 May 2013, Lee Jones wrote:
> This patch removes a comment which explains that the ab8505 platform
> uses the same initialisation settings as the ab8500. Well when this
> changed and the ab8505 started using its own set of initialisation
> values, someone forgot to remove it.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> arch/arm/mach-ux500/board-mop500-regulators.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
> index 33c353b..b34441b 100644
> --- a/arch/arm/mach-ux500/board-mop500-regulators.c
> +++ b/arch/arm/mach-ux500/board-mop500-regulators.c
> @@ -996,7 +996,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
> .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
> };
>
> -/* Use the AB8500 init settings for AB8505 as they are the same right now */
> struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
> .reg_init = ab8505_reg_init,
> .num_reg_init = ARRAY_SIZE(ab8505_reg_init),
This patch still stands though.
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] ARM: ux500: regulators: Remove misleading comment
2013-05-22 13:06 ` Lee Jones
@ 2013-05-27 11:39 ` Linus Walleij
-1 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2013-05-27 11:39 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 22, 2013 at 3:06 PM, Lee Jones <lee.jones@linaro.org> wrote:
> This patch removes a comment which explains that the ab8505 platform
> uses the same initialisation settings as the ab8500. Well when this
> changed and the ab8505 started using its own set of initialisation
> values, someone forgot to remove it.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Patch applied for ux500-core, thanks!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: ux500: regulators: Remove misleading comment
@ 2013-05-27 11:39 ` Linus Walleij
0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2013-05-27 11:39 UTC (permalink / raw)
To: Lee Jones
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Arnd Bergmann, Linus WALLEIJ,
Srinidhi KASAGAR
On Wed, May 22, 2013 at 3:06 PM, Lee Jones <lee.jones@linaro.org> wrote:
> This patch removes a comment which explains that the ab8505 platform
> uses the same initialisation settings as the ab8500. Well when this
> changed and the ab8505 started using its own set of initialisation
> values, someone forgot to remove it.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Patch applied for ux500-core, thanks!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-05-27 11:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-22 13:06 [PATCH] ARM: ux500: regulators: Remove misleading comment Lee Jones
2013-05-22 13:06 ` Lee Jones
2013-05-24 11:26 ` Lee Jones
2013-05-24 11:26 ` Lee Jones
2013-05-27 11:39 ` Linus Walleij
2013-05-27 11:39 ` Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.