All of lore.kernel.org
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/05] ARM: shmobile: r8a73a4 SMP prototype v1 (CA15 x 4)
Date: Thu, 30 May 2013 08:52:01 +0000	[thread overview]
Message-ID: <20130530085201.24374.97084.sendpatchset@w520> (raw)
In-Reply-To: <20130530085152.24374.64208.sendpatchset@w520>

From: Magnus Damm <damm@opensource.se>

Add SMP prototype support for r8a73a4 by enabling
4 x Cortex-A15. This patch only adds support for
booting, see the incremental patch for CPU Hotplug.

Needs a rewrite to support more generic handling of
CPU core power domains. Not ready for merge.

Not-yet-Signed-off-by: Magnus Damm <damm@opensource.se>
---

 Developed and tested on top of v3.10-rc2

 arch/arm/boot/dts/r8a73a4.dtsi                |   21 +++++
 arch/arm/mach-shmobile/Makefile               |    1 
 arch/arm/mach-shmobile/board-ape6evm.c        |    1 
 arch/arm/mach-shmobile/include/mach/r8a73a4.h |    1 
 arch/arm/mach-shmobile/setup-r8a73a4.c        |    1 
 arch/arm/mach-shmobile/smp-r8a73a4.c          |   89 +++++++++++++++++++++++++
 6 files changed, 114 insertions(+)

--- 0003/arch/arm/boot/dts/r8a73a4.dtsi
+++ work/arch/arm/boot/dts/r8a73a4.dtsi	2013-05-22 13:21:21.000000000 +0900
@@ -25,6 +25,27 @@
 			reg = <0>;
 			clock-frequency = <1500000000>;
 		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1500000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1500000000>;
+		};
 	};
 
 	gic: interrupt-controller@f1001000 {
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-05-22 13:21:21.000000000 +0900
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o
+smp-$(CONFIG_ARCH_R8A73A4)	+= smp-r8a73a4.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
 
--- 0001/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c	2013-05-22 13:21:51.000000000 +0900
@@ -87,6 +87,7 @@ static const char *ape6evm_boards_compat
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.smp		= smp_ops(r8a73a4_smp_ops),
 	.init_irq	= irqchip_init,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
--- 0001/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a73a4.h	2013-05-22 13:21:21.000000000 +0900
@@ -4,5 +4,6 @@
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+extern struct smp_operations r8a73a4_smp_ops;
 
 #endif /* __ASM_R8A73A4_H__ */
--- 0001/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c	2013-05-22 13:21:44.000000000 +0900
@@ -194,6 +194,7 @@ static const char *r8a73a4_boards_compat
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a73a4_smp_ops),
 	.init_irq	= irqchip_init,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
--- /dev/null
+++ work/arch/arm/mach-shmobile/smp-r8a73a4.c	2013-05-22 13:21:21.000000000 +0900
@@ -0,0 +1,89 @@
+/*
+ * SMP support for r8a73a4
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+#define SYSC	0xe6180000
+#define CA15BAR	0x6020
+#define RESCNT	0x801c
+
+#define APMU	0xe6150000
+#define CA15WUPCR 0x2010
+
+#define MERAM	0xe8080000
+#define CCI_BASE	0xf0190000
+#define CCI_SLAVE3	0x4000
+#define CCI_SNOOP	0x0000
+#define CCI_STATUS	0x000c
+
+static void __init r8a73a4_smp_prepare_cpus(unsigned int max_cpus)
+{
+	u32 bar;
+	void __iomem *p;
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, 16);
+	memcpy(p, shmobile_secondary_vector, 16);
+	iounmap(p);
+
+	flush_cache_louis();
+
+	/* setup reset vector and disable reset */
+	p = ioremap_nocache(SYSC, 0x9000);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	__raw_writel(bar, p + CA15BAR);
+	__raw_writel(bar | 0x10, p + CA15BAR);
+	__raw_writel(__raw_readl(p + RESCNT) & ~(1 << 10), p + RESCNT);
+	iounmap(p);
+
+	/* enable snoop and DVM */
+	p = ioremap_nocache(CCI_BASE, 0x8000);
+	__raw_writel(3, p + CCI_SLAVE3 + CCI_SNOOP);	/* ca15 */
+	while (__raw_readl(p + CCI_STATUS))
+		/* wait for pending bit low */;
+	iounmap(p);
+}
+
+static int __cpuinit r8a73a4_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *p;
+
+	/* wake up CPU core */
+	p = ioremap_nocache(APMU, 0x3000);
+	__raw_writel(1 << (cpu_logical_map(cpu) & 3), p + CA15WUPCR);
+	iounmap(p);
+
+	return 0;
+}
+
+struct smp_operations r8a73a4_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a73a4_smp_prepare_cpus,
+	.smp_boot_secondary	= r8a73a4_boot_secondary,
+};

WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/05] ARM: shmobile: r8a73a4 SMP prototype v1 (CA15 x 4)
Date: Thu, 30 May 2013 17:52:01 +0900	[thread overview]
Message-ID: <20130530085201.24374.97084.sendpatchset@w520> (raw)
In-Reply-To: <20130530085152.24374.64208.sendpatchset@w520>

From: Magnus Damm <damm@opensource.se>

Add SMP prototype support for r8a73a4 by enabling
4 x Cortex-A15. This patch only adds support for
booting, see the incremental patch for CPU Hotplug.

Needs a rewrite to support more generic handling of
CPU core power domains. Not ready for merge.

Not-yet-Signed-off-by: Magnus Damm <damm@opensource.se>
---

 Developed and tested on top of v3.10-rc2

 arch/arm/boot/dts/r8a73a4.dtsi                |   21 +++++
 arch/arm/mach-shmobile/Makefile               |    1 
 arch/arm/mach-shmobile/board-ape6evm.c        |    1 
 arch/arm/mach-shmobile/include/mach/r8a73a4.h |    1 
 arch/arm/mach-shmobile/setup-r8a73a4.c        |    1 
 arch/arm/mach-shmobile/smp-r8a73a4.c          |   89 +++++++++++++++++++++++++
 6 files changed, 114 insertions(+)

--- 0003/arch/arm/boot/dts/r8a73a4.dtsi
+++ work/arch/arm/boot/dts/r8a73a4.dtsi	2013-05-22 13:21:21.000000000 +0900
@@ -25,6 +25,27 @@
 			reg = <0>;
 			clock-frequency = <1500000000>;
 		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+		};
+
+		cpu2: cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1500000000>;
+		};
+
+		cpu3: cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1500000000>;
+		};
 	};
 
 	gic: interrupt-controller at f1001000 {
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile	2013-05-22 13:21:21.000000000 +0900
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-scu.o
+smp-$(CONFIG_ARCH_R8A73A4)	+= smp-r8a73a4.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o headsmp-scu.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o
 
--- 0001/arch/arm/mach-shmobile/board-ape6evm.c
+++ work/arch/arm/mach-shmobile/board-ape6evm.c	2013-05-22 13:21:51.000000000 +0900
@@ -87,6 +87,7 @@ static const char *ape6evm_boards_compat
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.smp		= smp_ops(r8a73a4_smp_ops),
 	.init_irq	= irqchip_init,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
--- 0001/arch/arm/mach-shmobile/include/mach/r8a73a4.h
+++ work/arch/arm/mach-shmobile/include/mach/r8a73a4.h	2013-05-22 13:21:21.000000000 +0900
@@ -4,5 +4,6 @@
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+extern struct smp_operations r8a73a4_smp_ops;
 
 #endif /* __ASM_R8A73A4_H__ */
--- 0001/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ work/arch/arm/mach-shmobile/setup-r8a73a4.c	2013-05-22 13:21:44.000000000 +0900
@@ -194,6 +194,7 @@ static const char *r8a73a4_boards_compat
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
+	.smp		= smp_ops(r8a73a4_smp_ops),
 	.init_irq	= irqchip_init,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
--- /dev/null
+++ work/arch/arm/mach-shmobile/smp-r8a73a4.c	2013-05-22 13:21:21.000000000 +0900
@@ -0,0 +1,89 @@
+/*
+ * SMP support for r8a73a4
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_plat.h>
+
+#define SYSC	0xe6180000
+#define CA15BAR	0x6020
+#define RESCNT	0x801c
+
+#define APMU	0xe6150000
+#define CA15WUPCR 0x2010
+
+#define MERAM	0xe8080000
+#define CCI_BASE	0xf0190000
+#define CCI_SLAVE3	0x4000
+#define CCI_SNOOP	0x0000
+#define CCI_STATUS	0x000c
+
+static void __init r8a73a4_smp_prepare_cpus(unsigned int max_cpus)
+{
+	u32 bar;
+	void __iomem *p;
+
+	/* MERAM for jump stub, because BAR requires 256KB aligned address */
+	p = ioremap_nocache(MERAM, 16);
+	memcpy(p, shmobile_secondary_vector, 16);
+	iounmap(p);
+
+	flush_cache_louis();
+
+	/* setup reset vector and disable reset */
+	p = ioremap_nocache(SYSC, 0x9000);
+	bar = (MERAM >> 8) & 0xfffffc00;
+	__raw_writel(bar, p + CA15BAR);
+	__raw_writel(bar | 0x10, p + CA15BAR);
+	__raw_writel(__raw_readl(p + RESCNT) & ~(1 << 10), p + RESCNT);
+	iounmap(p);
+
+	/* enable snoop and DVM */
+	p = ioremap_nocache(CCI_BASE, 0x8000);
+	__raw_writel(3, p + CCI_SLAVE3 + CCI_SNOOP);	/* ca15 */
+	while (__raw_readl(p + CCI_STATUS))
+		/* wait for pending bit low */;
+	iounmap(p);
+}
+
+static int __cpuinit r8a73a4_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	void __iomem *p;
+
+	/* wake up CPU core */
+	p = ioremap_nocache(APMU, 0x3000);
+	__raw_writel(1 << (cpu_logical_map(cpu) & 3), p + CA15WUPCR);
+	iounmap(p);
+
+	return 0;
+}
+
+struct smp_operations r8a73a4_smp_ops __initdata = {
+	.smp_prepare_cpus	= r8a73a4_smp_prepare_cpus,
+	.smp_boot_secondary	= r8a73a4_boot_secondary,
+};

  reply	other threads:[~2013-05-30  8:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-30  8:51 [PATCH 00/05] ARM: shmobile: r8a73a4 SMP and CPU Hotplug prototype v2 Magnus Damm
2013-05-30  8:51 ` Magnus Damm
2013-05-30  8:52 ` Magnus Damm [this message]
2013-05-30  8:52   ` [PATCH 01/05] ARM: shmobile: r8a73a4 SMP prototype v1 (CA15 x 4) Magnus Damm
2013-06-05  8:29   ` Shinya Kuribayashi
2013-06-05  8:29     ` Shinya Kuribayashi
2013-05-30  8:52 ` [PATCH 02/05] ARM: shmobile: r8a73a4 CPU Hotplug " Magnus Damm
2013-05-30  8:52   ` Magnus Damm
2013-05-30  8:52 ` [PATCH 03/05] ARM: shmobile: r8a73a4 CA15 setup WFE as NOP Magnus Damm
2013-05-30  8:52   ` Magnus Damm
2013-05-30  8:52 ` [PATCH 04/05] ARM: shmobile: r8a73a4 SMP CA7 prototype (+ CA7 x 4) Magnus Damm
2013-05-30  8:52   ` Magnus Damm
2013-05-30  8:52 ` [PATCH 05/05] ARM: shmobile: r8a73a4 CA7 setup arch timer Magnus Damm
2013-05-30  8:52   ` Magnus Damm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130530085201.24374.97084.sendpatchset@w520 \
    --to=magnus.damm@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.