From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] ARM: dts: imx27: Add 1-wire
Date: Thu, 20 Jun 2013 17:44:01 +0200 [thread overview]
Message-ID: <20130620154401.GD8219@s25.your-server.de> (raw)
In-Reply-To: <1371741454.488712140@f66.mail.ru>
On Thu, Jun 20, 2013 at 07:17:34PM +0400, Alexander Shiyan wrote:
> > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > ---
> > arch/arm/boot/dts/imx27.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
> > index 044004a..e883e77 100644
> > --- a/arch/arm/boot/dts/imx27.dtsi
> > +++ b/arch/arm/boot/dts/imx27.dtsi
> > @@ -110,6 +110,14 @@
> > clock-names = "ipg", "per";
> > };
> >
> > + owire: owire at 10009000 {
> > + compatible = "fsl,imx21-owire";
>
> I think you should use "fsl,imx27-owire", "fsl,imx21-owire" here.
Fixed, thank you
Markus
>
> > + reg = <0x10009000 0x1000>;
> > + clocks = <&clks 35>;
> > + clock-names = "ipg";
> > + status = "disabled";
> > + };
> > +
> > uart1: serial at 1000a000 {
> > compatible = "fsl,imx27-uart", "fsl,imx21-uart";
> > reg = <0x1000a000 0x1000>;
> > --
>
>
> ---
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
WARNING: multiple messages have this Message-ID (diff)
From: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Alexander Shiyan <shc_work-JGs/UdohzUI@public.gmane.org>
Cc: Fabio Estevam
<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: Re: [PATCH 4/6] ARM: dts: imx27: Add 1-wire
Date: Thu, 20 Jun 2013 17:44:01 +0200 [thread overview]
Message-ID: <20130620154401.GD8219@s25.your-server.de> (raw)
In-Reply-To: <1371741454.488712140-ZzAHCfOzKYkox3rIn2DAYQ@public.gmane.org>
On Thu, Jun 20, 2013 at 07:17:34PM +0400, Alexander Shiyan wrote:
> > Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> > arch/arm/boot/dts/imx27.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
> > index 044004a..e883e77 100644
> > --- a/arch/arm/boot/dts/imx27.dtsi
> > +++ b/arch/arm/boot/dts/imx27.dtsi
> > @@ -110,6 +110,14 @@
> > clock-names = "ipg", "per";
> > };
> >
> > + owire: owire@10009000 {
> > + compatible = "fsl,imx21-owire";
>
> I think you should use "fsl,imx27-owire", "fsl,imx21-owire" here.
Fixed, thank you
Markus
>
> > + reg = <0x10009000 0x1000>;
> > + clocks = <&clks 35>;
> > + clock-names = "ipg";
> > + status = "disabled";
> > + };
> > +
> > uart1: serial@1000a000 {
> > compatible = "fsl,imx27-uart", "fsl,imx21-uart";
> > reg = <0x1000a000 0x1000>;
> > --
>
>
> ---
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-06-20 15:44 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 14:50 [PATCH 0/6] ARM: dts: imx27 Phytec PhyCARD-S Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 1/6] ARM: mx27: Replace clk_register_clkdev with clock DT lookup Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 15:28 ` Alexander Shiyan
2013-06-20 15:28 ` Alexander Shiyan
2013-06-20 15:35 ` Fabio Estevam
2013-06-20 15:35 ` Fabio Estevam
2013-06-20 15:41 ` Fabio Estevam
2013-06-20 15:41 ` Fabio Estevam
2013-06-20 15:42 ` Markus Pargmann
2013-06-20 15:42 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 2/6] ARM: imx27: Use 'AITC' for the interrupt controller name Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 3/6] ARM: dts: imx27: Add imx framebuffer device Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 4/6] ARM: dts: imx27: Add 1-wire Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 15:17 ` Alexander Shiyan
2013-06-20 15:17 ` Alexander Shiyan
2013-06-20 15:44 ` Markus Pargmann [this message]
2013-06-20 15:44 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 5/6] ARM: dts: imx27 cpufreq-cpu0 frequencies Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-21 2:44 ` Shawn Guo
2013-06-21 2:44 ` Shawn Guo
2013-06-21 4:54 ` Re[2]: " Alexander Shiyan
2013-06-21 4:54 ` Alexander Shiyan
2013-06-21 5:23 ` Shawn Guo
2013-06-21 5:23 ` Shawn Guo
2013-06-21 8:47 ` Lorenzo Pieralisi
2013-06-21 8:47 ` Lorenzo Pieralisi
2013-06-23 8:22 ` Markus Pargmann
2013-06-23 8:22 ` Markus Pargmann
2013-06-20 14:50 ` [PATCH 6/6] ARM: dts: Add device tree support for phycard pca100 Markus Pargmann
2013-06-20 14:50 ` Markus Pargmann
2013-06-20 15:15 ` Markus Pargmann
2013-06-20 15:15 ` Markus Pargmann
2013-06-20 15:21 ` Alexander Shiyan
2013-06-20 15:21 ` Alexander Shiyan
2013-06-20 15:45 ` Markus Pargmann
2013-06-20 15:45 ` Markus Pargmann
2013-06-21 3:46 ` Shawn Guo
2013-06-21 3:46 ` Shawn Guo
2013-06-23 8:17 ` Markus Pargmann
2013-06-23 8:17 ` Markus Pargmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130620154401.GD8219@s25.your-server.de \
--to=mpa@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.