From: Felipe Balbi <balbi@ti.com>
To: Pekon Gupta <pekon@ti.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, arnd@arndb.de, Pawel.Moll@arm.com,
dedekind1@gmail.com, tony@atomide.com,
ijc+devicetree@hellion.org.uk, avinashphilipk@gmail.com,
balbi@ti.com, robherring2@gmail.com, bcousson@baylibre.com,
swarren@wwwdotorg.org, olof@lixom.net,
linux-mtd@lists.infradead.org,
Andrew Morton <akpm@linux-foundation.org>,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: Re: [PATCH v8 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
Date: Fri, 11 Oct 2013 10:56:01 -0500 [thread overview]
Message-ID: <20131011155601.GT25706@radagast> (raw)
In-Reply-To: <1381498603-15715-6-git-send-email-pekon@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1580 bytes --]
On Fri, Oct 11, 2013 at 07:06:42PM +0530, Pekon Gupta wrote:
> Updated DTS to replace deprecated binding with newer values
> Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
>
> Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
> ---
> arch/arm/boot/dts/am335x-evm.dts | 3 +--
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> 2 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index e8ec875..1aee6ac 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -269,7 +269,6 @@
> reg = <0 0 0>; /* CS0, offset 0 */
> nand-bus-width = <8>;
> ti,nand-ecc-opt = "bch8";
> - gpmc,device-nand = "true";
> gpmc,device-width = <1>;
> gpmc,sync-clk-ps = <0>;
> gpmc,cs-on-ns = <0>;
> @@ -296,7 +295,7 @@
>
> #address-cells = <1>;
> #size-cells = <1>;
> - elm_id = <&elm>;
> + ti,elm-id = <&elm>;
>
> /* MTD partition table */
> partition@0 {
> diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
> index e2249bc..501f863 100644
> --- a/arch/arm/boot/dts/omap3430-sdp.dts
> +++ b/arch/arm/boot/dts/omap3430-sdp.dts
> @@ -105,7 +105,7 @@
> reg = <1 0 0x08000000>;
> nand-bus-width = <8>;
>
> - ti,nand-ecc-opt = "sw";
> + ti,nand-ecc-opt = "ham1";
> gpmc,cs-on-ns = <0>;
> gpmc,cs-rd-off-ns = <36>;
> gpmc,cs-wr-off-ns = <36>;
> --
> 1.8.1
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Felipe Balbi <balbi@ti.com>
To: Pekon Gupta <pekon@ti.com>
Cc: mark.rutland@arm.com, robherring2@gmail.com, olof@lixom.net,
computersforpeace@gmail.com, dedekind1@gmail.com,
Pawel.Moll@arm.com, ijc+devicetree@hellion.org.uk,
swarren@wwwdotorg.org, dwmw2@infradead.org, arnd@arndb.de,
tony@atomide.com, bcousson@baylibre.com,
avinashphilipk@gmail.com, balbi@ti.com,
linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH v8 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
Date: Fri, 11 Oct 2013 10:56:01 -0500 [thread overview]
Message-ID: <20131011155601.GT25706@radagast> (raw)
In-Reply-To: <1381498603-15715-6-git-send-email-pekon@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1580 bytes --]
On Fri, Oct 11, 2013 at 07:06:42PM +0530, Pekon Gupta wrote:
> Updated DTS to replace deprecated binding with newer values
> Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
>
> Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
> ---
> arch/arm/boot/dts/am335x-evm.dts | 3 +--
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> 2 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index e8ec875..1aee6ac 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -269,7 +269,6 @@
> reg = <0 0 0>; /* CS0, offset 0 */
> nand-bus-width = <8>;
> ti,nand-ecc-opt = "bch8";
> - gpmc,device-nand = "true";
> gpmc,device-width = <1>;
> gpmc,sync-clk-ps = <0>;
> gpmc,cs-on-ns = <0>;
> @@ -296,7 +295,7 @@
>
> #address-cells = <1>;
> #size-cells = <1>;
> - elm_id = <&elm>;
> + ti,elm-id = <&elm>;
>
> /* MTD partition table */
> partition@0 {
> diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
> index e2249bc..501f863 100644
> --- a/arch/arm/boot/dts/omap3430-sdp.dts
> +++ b/arch/arm/boot/dts/omap3430-sdp.dts
> @@ -105,7 +105,7 @@
> reg = <1 0 0x08000000>;
> nand-bus-width = <8>;
>
> - ti,nand-ecc-opt = "sw";
> + ti,nand-ecc-opt = "ham1";
> gpmc,cs-on-ns = <0>;
> gpmc,cs-rd-off-ns = <36>;
> gpmc,cs-wr-off-ns = <36>;
> --
> 1.8.1
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-10-11 15:56 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-11 13:36 [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 13:36 ` [PATCH v8 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 18:33 ` Tony Lindgren
2013-10-11 18:33 ` Tony Lindgren
2013-10-11 13:36 ` [PATCH v8 2/6] ARM: OMAP2+: cleaned-up DT support of various ECC schemes Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 18:32 ` Tony Lindgren
2013-10-11 18:32 ` Tony Lindgren
2013-10-11 13:36 ` [PATCH v8 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 19:28 ` Brian Norris
2013-10-11 19:28 ` Brian Norris
2013-10-12 23:58 ` Gupta, Pekon
2013-10-12 23:58 ` Gupta, Pekon
2013-10-13 1:40 ` Brian Norris
2013-10-13 1:40 ` Brian Norris
2013-10-11 13:36 ` [PATCH v8 4/6] mtd:nand:omap2: updated support for BCH4 ECC scheme Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 15:55 ` Felipe Balbi
2013-10-11 20:28 ` Brian Norris
2013-10-11 20:28 ` Brian Norris
2013-10-11 13:36 ` [PATCH v8 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:56 ` Felipe Balbi [this message]
2013-10-11 15:56 ` Felipe Balbi
2013-10-11 13:36 ` [PATCH v8 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls Pekon Gupta
2013-10-11 13:36 ` Pekon Gupta
2013-10-11 15:56 ` Felipe Balbi
2013-10-11 15:56 ` Felipe Balbi
2013-10-11 18:15 ` Brian Norris
2013-10-11 18:15 ` Brian Norris
2013-10-11 18:28 ` Tony Lindgren
2013-10-11 18:28 ` Tony Lindgren
2013-10-11 19:27 ` Brian Norris
2013-10-11 19:27 ` Brian Norris
2013-10-11 21:46 ` Tony Lindgren
2013-10-11 21:46 ` Tony Lindgren
2013-10-11 22:14 ` Brian Norris
2013-10-11 22:14 ` Brian Norris
2013-10-11 21:09 ` [PATCH v8 0/6] mtd:nand:omap2: clean-up of supported ECC schemes Brian Norris
2013-10-11 21:09 ` Brian Norris
2013-10-12 22:26 ` Gupta, Pekon
2013-10-12 22:26 ` Gupta, Pekon
2013-10-13 1:40 ` Brian Norris
2013-10-13 1:40 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131011155601.GT25706@radagast \
--to=balbi@ti.com \
--cc=Pawel.Moll@arm.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=avinashphilipk@gmail.com \
--cc=bcousson@baylibre.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=pekon@ti.com \
--cc=robherring2@gmail.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.