* [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board
@ 2013-10-15 10:58 Heiko Stübner
2013-10-15 10:59 ` [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file Heiko Stübner
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: Heiko Stübner @ 2013-10-15 10:58 UTC (permalink / raw)
To: linux-arm-kernel
Some slight reordering of stuff to facilitate the addition of support for
the RK3188 SoC and the Radxa Rock board using it.
Heiko Stuebner (5):
ARM: rockchip: move shared dt properties to common source file
ARM: rockchip: enable arm-global-timer
ARM: rockchip: add dts for bqcurie2 tablet
ARM: rockchip: add support for rk3188 and Radxa Rock board
MAINTAINERS: Add maintainers entry for Rockchip SoCs
MAINTAINERS | 7 +
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 109 ++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 98 +----------
arch/arm/boot/dts/rk3188-clocks.dtsi | 289 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3188-radxarock.dts | 80 +++++++++
arch/arm/boot/dts/rk3188.dtsi | 253 ++++++++++++++++++++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 124 ++++++++++++++
arch/arm/mach-rockchip/Kconfig | 2 +
8 files changed, 865 insertions(+), 97 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3066a-bqcurie2.dts
create mode 100644 arch/arm/boot/dts/rk3188-clocks.dtsi
create mode 100644 arch/arm/boot/dts/rk3188-radxarock.dts
create mode 100644 arch/arm/boot/dts/rk3188.dtsi
create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi
--
1.7.10.4
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner @ 2013-10-15 10:59 ` Heiko Stübner 2013-10-15 11:00 ` [PATCH 2/5] ARM: rockchip: enable arm-global-timer Heiko Stübner ` (3 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 10:59 UTC (permalink / raw) To: linux-arm-kernel The rk3188 SoC shares a lot of peripherals with the rk3066 SoC, but not all. Therefore move the common parts to a shared dtsi. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3066a.dtsi | 98 +-------------------------------- arch/arm/boot/dts/rk3xxx.dtsi | 117 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 118 insertions(+), 97 deletions(-) create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 56bfac9..2218c64 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -14,15 +14,12 @@ */ #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "skeleton.dtsi" +#include "rk3xxx.dtsi" #include "rk3066a-clocks.dtsi" / { compatible = "rockchip,rk3066a"; - interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -43,33 +40,6 @@ }; soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - gic: interrupt-controller at 1013d000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1013d000 0x1000>, - <0x1013c100 0x0100>; - }; - - L2: l2-cache-controller at 10138000 { - compatible = "arm,pl310-cache"; - reg = <0x10138000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - local-timer at 1013c600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; - clocks = <&dummy150m>; - }; - timer at 20038000 { compatible = "snps,dw-apb-timer-osc"; reg = <0x20038000 0x100>; @@ -320,71 +290,5 @@ }; }; }; - - uart0: serial at 10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 8>; - status = "disabled"; - }; - - uart1: serial at 10126000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10126000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 10>; - status = "disabled"; - }; - - uart2: serial at 20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 12>; - status = "disabled"; - }; - - uart3: serial at 20068000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20068000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 14>; - status = "disabled"; - }; - - dwmmc at 10214000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10214000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 10>, <&clk_gates2 11>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; - - dwmmc at 10218000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10218000 0x1000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 11>, <&clk_gates2 13>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi new file mode 100644 index 0000000..fd3e476 --- /dev/null +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -0,0 +1,117 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller at 1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + L2: l2-cache-controller at 10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer at 1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&dummy150m>; + }; + + uart0: serial at 10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 8>; + status = "disabled"; + }; + + uart1: serial at 10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 10>; + status = "disabled"; + }; + + uart2: serial at 20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 12>; + status = "disabled"; + }; + + uart3: serial at 20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&clk_gates1 14>; + status = "disabled"; + }; + + dwmmc at 10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 10>, <&clk_gates2 11>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + dwmmc at 10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clk_gates5 11>, <&clk_gates2 13>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + }; +}; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/5] ARM: rockchip: enable arm-global-timer 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner 2013-10-15 10:59 ` [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file Heiko Stübner @ 2013-10-15 11:00 ` Heiko Stübner 2013-10-15 11:00 ` [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet Heiko Stübner ` (2 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 11:00 UTC (permalink / raw) To: linux-arm-kernel RK2928 and RK3066 contain a dw_apb timer component, while the rk3188 uses a slightly similar but still different timer component. But all of them support the ARM-global-timer that got added as clocksource driver recently. So enable support for it to get a working clocksource for rk3188. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3xxx.dtsi | 7 +++++++ arch/arm/mach-rockchip/Kconfig | 2 ++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index fd3e476..0fcbcfd 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -41,6 +41,13 @@ cache-level = <2>; }; + global-timer at 1013c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1013c200 0x20>; + interrupts = <GIC_PPI 11 0x304>; + clocks = <&dummy150m>; + }; + local-timer at 1013c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x1013c600 0x20>; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 25ee12b..6fef464 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -11,6 +11,8 @@ config ARCH_ROCKCHIP select COMMON_CLK select GENERIC_CLOCKEVENTS select DW_APB_TIMER_OF + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs containing the RK2928, RK30xx and RK31xx series. -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner 2013-10-15 10:59 ` [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file Heiko Stübner 2013-10-15 11:00 ` [PATCH 2/5] ARM: rockchip: enable arm-global-timer Heiko Stübner @ 2013-10-15 11:00 ` Heiko Stübner 2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner 2013-10-15 11:01 ` [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs Heiko Stübner 4 siblings, 0 replies; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 11:00 UTC (permalink / raw) To: linux-arm-kernel The BQ Curie2 is a tablet based on the rk3066a SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 109 ++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 arch/arm/boot/dts/rk3066a-bqcurie2.dts diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts new file mode 100644 index 0000000..035df40 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "bq Curie 2"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + soc { + uart0: serial at 10124000 { + status = "okay"; + }; + + uart1: serial at 10126000 { + status = "okay"; + }; + + uart2: serial at 20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial at 20068000 { + status = "okay"; + }; + + vcc_sd0: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + }; + + dwmmc at 10214000 { /* sdmmc */ + num-slots = <1>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; + vmmc-supply = <&vcc_sd0>; + + slot at 0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + dwmmc at 10218000 { /* wifi */ + num-slots = <1>; + status = "okay"; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + + slot at 0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button at 0 { + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + button at 1 { + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + linux,code = <104>; + label = "GPIO Key Vol-"; + linux,input-type = <1>; + gpio-key,wakeup = <0>; + debounce-interval = <100>; + }; + /* VOL+ comes somehow thru the ADC */ + }; + }; +}; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner ` (2 preceding siblings ...) 2013-10-15 11:00 ` [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet Heiko Stübner @ 2013-10-15 11:01 ` Heiko Stübner 2013-10-15 11:08 ` Heiko Stübner 2013-10-15 11:01 ` [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs Heiko Stübner 4 siblings, 1 reply; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 11:01 UTC (permalink / raw) To: linux-arm-kernel Basic devicetree files for the rk3188 SoC. Also provided is a board dts file for the upcoming Radxa Rock board using this SoC. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3188-clocks.dtsi | 289 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188-radxarock.dts | 80 +++++++++ arch/arm/boot/dts/rk3188.dtsi | 253 ++++++++++++++++++++++++++++ 3 files changed, 622 insertions(+) create mode 100644 arch/arm/boot/dts/rk3188-clocks.dtsi create mode 100644 arch/arm/boot/dts/rk3188-radxarock.dts create mode 100644 arch/arm/boot/dts/rk3188.dtsi diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi new file mode 100644 index 0000000..b1b92dc --- /dev/null +++ b/arch/arm/boot/dts/rk3188-clocks.dtsi @@ -0,0 +1,289 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + compatible = "fixed-clock"; + clock-frequency = <0>; + #clock-cells = <0>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + dummy48m: dummy48m { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + #clock-cells = <0>; + }; + + dummy150m: dummy150m { + compatible = "fixed-clock"; + clock-frequency = <150000000>; + #clock-cells = <0>; + }; + + clk_gates0: gate-clk at 200000d0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d0 0x4>; + clocks = <&dummy150m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_core_periph", "gate_cpu_gpll", + "gate_ddrphy", "gate_aclk_cpu", + "gate_hclk_cpu", "gate_pclk_cpu", + "gate_atclk_cpu", "gate_aclk_core", + "reserved", "gate_i2s0", + "gate_i2s0_frac", "reserved", + "reserved", "gate_spdif", + "gate_spdif_frac", "gate_testclk"; + + #clock-cells = <1>; + }; + + clk_gates1: gate-clk at 200000d4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d4 0x4>; + clocks = <&xin24m>, <&xin24m>, + <&xin24m>, <&dummy>, + <&dummy>, <&xin24m>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_timer0", "gate_timer1", + "gate_timer3", "gate_jtag", + "gate_aclk_lcdc1_src", "gate_otgphy0", + "gate_otgphy1", "gate_ddr_gpll", + "gate_uart0", "gate_frac_uart0", + "gate_uart1", "gate_frac_uart1", + "gate_uart2", "gate_frac_uart2", + "gate_uart3", "gate_frac_uart3"; + + #clock-cells = <1>; + }; + + clk_gates2: gate-clk at 200000d8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000d8 0x4>; + clocks = <&clk_gates2 1>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&clk_gates2 3>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy48m>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_periph_src", "gate_aclk_periph", + "gate_hclk_periph", "gate_pclk_periph", + "gate_smc", "gate_mac", + "gate_hsadc", "gate_hsadc_frac", + "gate_saradc", "gate_spi0", + "gate_spi1", "gate_mmc0", + "gate_mac_lbtest", "gate_mmc1", + "gate_emmc", "reserved"; + + #clock-cells = <1>; + }; + + clk_gates3: gate-clk at 200000dc { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000dc 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&xin24m>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&xin24m>, <&dummy>; + + clock-output-names = + "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", + "gate_dclk_lcdc1", "gate_pclkin_cif0", + "gate_timer2", "gate_timer4", + "gate_hsicphy", "gate_cif0_out", + "gate_timer5", "gate_aclk_vepu", + "gate_hclk_vepu", "gate_aclk_vdpu", + "gate_hclk_vdpu", "reserved", + "gate_timer6", "gate_aclk_gpu_src"; + + #clock-cells = <1>; + }; + + clk_gates4: gate-clk at 200000e0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e0 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates2 3>, + <&clk_gates2 1>, <&clk_gates2 1>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates0 4>, <&clk_gates0 4>, + <&clk_gates0 3>, <&dummy>, + <&clk_gates0 3>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", + "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", + "gate_aclk_pei_niu", "gate_hclk_usb_peri", + "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", + "gate_hclk_cpubus", "gate_hclk_ahb2apb", + "gate_aclk_strc_sys", "reserved", + "gate_aclk_intmem", "reserved", + "gate_hclk_imem1", "gate_hclk_imem0"; + + #clock-cells = <1>; + }; + + clk_gates5: gate-clk at 200000e4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e4 0x4>; + clocks = <&clk_gates0 3>, <&clk_gates2 1>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates0 4>, <&clk_gates0 5>, + <&clk_gates2 1>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates4 5>; + + clock-output-names = + "gate_aclk_dmac1", "gate_aclk_dmac2", + "gate_pclk_efuse", "gate_pclk_tzpc", + "gate_pclk_grf", "gate_pclk_pmu", + "gate_hclk_rom", "gate_pclk_ddrupctl", + "gate_aclk_smc", "gate_hclk_nandc", + "gate_hclk_mmc0", "gate_hclk_mmc1", + "gate_hclk_emmc", "gate_hclk_otg0"; + + #clock-cells = <1>; + }; + + clk_gates6: gate-clk at 200000e8 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000e8 0x4>; + clocks = <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>, + <&dummy>, <&dummy>, + <&clk_gates3 0>, <&clk_gates0 4>, + <&clk_gates0 4>, <&clk_gates1 4>, + <&clk_gates0 4>, <&clk_gates3 0>; + + clock-output-names = + "gate_aclk_lcdc0", "gate_hclk_lcdc0", + "gate_hclk_lcdc1", "gate_aclk_lcdc1", + "gate_hclk_cif0", "gate_aclk_cif0", + "reserved", "reserved", + "gate_aclk_ipp", "gate_hclk_ipp", + "gate_hclk_rga", "gate_aclk_rga", + "gate_hclk_vio_bus", "gate_aclk_vio0"; + + #clock-cells = <1>; + }; + + clk_gates7: gate-clk at 200000ec { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000ec 0x4>; + clocks = <&clk_gates2 2>, <&clk_gates0 4>, + <&clk_gates0 4>, <&dummy>, + <&dummy>, <&clk_gates2 2>, + <&clk_gates2 2>, <&clk_gates0 5>, + <&dummy>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates2 3>; + + clock-output-names = + "gate_hclk_emac", "gate_hclk_spdif", + "gate_hclk_i2s0_2ch", "gate_hclk_otg1", + "gate_hclk_hsic", "gate_hclk_hsadc", + "gate_hclk_pidf", "gate_pclk_timer0", + "reserved", "gate_pclk_timer2", + "gate_pclk_pwm01", "gate_pclk_pwm23", + "gate_pclk_spi0", "gate_pclk_spi1", + "gate_pclk_saradc", "gate_pclk_wdt"; + + #clock-cells = <1>; + }; + + clk_gates8: gate-clk at 200000f0 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f0 0x4>; + clocks = <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&clk_gates2 3>, + <&clk_gates2 3>, <&clk_gates0 5>, + <&clk_gates0 5>, <&clk_gates0 5>, + <&clk_gates2 3>, <&dummy>; + + clock-output-names = + "gate_pclk_uart0", "gate_pclk_uart1", + "gate_pclk_uart2", "gate_pclk_uart3", + "gate_pclk_i2c0", "gate_pclk_i2c1", + "gate_pclk_i2c2", "gate_pclk_i2c3", + "gate_pclk_i2c4", "gate_pclk_gpio0", + "gate_pclk_gpio1", "gate_pclk_gpio2", + "gate_pclk_gpio3", "gate_aclk_gps"; + + #clock-cells = <1>; + }; + + clk_gates9: gate-clk at 200000f4 { + compatible = "rockchip,rk2928-gate-clk"; + reg = <0x200000f4 0x4>; + clocks = <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>, + <&dummy>, <&dummy>; + + clock-output-names = + "gate_clk_core_dbg", "gate_pclk_dbg", + "gate_clk_trace", "gate_atclk", + "gate_clk_l2c", "gate_aclk_vio1", + "gate_pclk_publ", "gate_aclk_gpu"; + + #clock-cells = <1>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts new file mode 100644 index 0000000..3ba1968 --- /dev/null +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3188.dtsi" + +/ { + model = "Radxa Rock"; + + memory { + reg = <0x60000000 0x80000000>; + }; + + soc { + uart0: serial at 10124000 { + status = "okay"; + }; + + uart1: serial at 10126000 { + status = "okay"; + }; + + uart2: serial at 20064000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "okay"; + }; + + uart3: serial at 20068000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button at 0 { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + yellow { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + sleep { + gpios = <&gpio0 15 0>; + default-state = "off"; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi new file mode 100644 index 0000000..1a26b03 --- /dev/null +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -0,0 +1,253 @@ +/* + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3xxx.dtsi" +#include "rk3188-clocks.dtsi" + +/ { + compatible = "rockchip,rk3188"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x1>; + }; + cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x2>; + }; + cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x3>; + }; + }; + + soc { + global-timer at 1013c200 { + interrupts = <GIC_PPI 11 0xf04>; + }; + + local-timer at 1013c600 { + interrupts = <GIC_PPI 13 0xf04>; + }; + + pinctrl at 20008000 { + compatible = "rockchip,rk3188-pinctrl"; + reg = <0x20008000 0xa0>, + <0x20008164 0x1a0>; + reg-names = "base", "pull"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0 at 0x2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>, + <0x20004064 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1 at 0x2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2 at 2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 11>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3 at 20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 12>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg_pull_down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_pwr: sd0-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; + }; +}; -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board 2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner @ 2013-10-15 11:08 ` Heiko Stübner 0 siblings, 0 replies; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 11:08 UTC (permalink / raw) To: linux-arm-kernel Am Dienstag, 15. Oktober 2013, 13:01:02 schrieb Heiko St?bner: > Basic devicetree files for the rk3188 SoC. Also provided is a board > dts file for the upcoming Radxa Rock board using this SoC. > > Signed-off-by: Heiko Stuebner <heiko@sntech.de> [...] > + pinctrl at 20008000 { > + compatible = "rockchip,rk3188-pinctrl"; > + reg = <0x20008000 0xa0>, > + <0x20008164 0x1a0>; > + reg-names = "base", "pull"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gpio0: gpio0 at 0x2000a000 { > + compatible = "rockchip,rk3188-gpio-bank0"; > + reg = <0x2000a000 0x100>, > + <0x20004064 0x8>; > + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_gates8 9>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; Forgot to add, that this of course depends on the separate change to the bindings of the pinctrl driver being suitable. Heiko ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner ` (3 preceding siblings ...) 2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner @ 2013-10-15 11:01 ` Heiko Stübner 4 siblings, 0 replies; 7+ messages in thread From: Heiko Stübner @ 2013-10-15 11:01 UTC (permalink / raw) To: linux-arm-kernel I plan to stay with the Rockchip SoCs for the foreseable future and hope to expand its support along the way. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e61c2e8..efa92cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1142,6 +1142,13 @@ F: drivers/net/ethernet/i825xx/ether1* F: drivers/net/ethernet/seeq/ether3* F: drivers/scsi/arm/ +ARM/Rockchip SoC support +M: Heiko Stuebner <heiko@sntech.de> +L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-rockchip/ +F: drivers/*/*rockchip* + ARM/SHARK MACHINE SUPPORT M: Alexander Schulz <alex@shark-linux.de> W: http://www.shark-linux.de/shark.html -- 1.7.10.4 ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-10-15 11:08 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-10-15 10:58 [PATCH 0/5] ARM: rockchip: Support for RK3188 and Radxa Rock board Heiko Stübner 2013-10-15 10:59 ` [PATCH 1/5] ARM: rockchip: move shared dt properties to common source file Heiko Stübner 2013-10-15 11:00 ` [PATCH 2/5] ARM: rockchip: enable arm-global-timer Heiko Stübner 2013-10-15 11:00 ` [PATCH 3/5] ARM: rockchip: add dts for bqcurie2 tablet Heiko Stübner 2013-10-15 11:01 ` [PATCH 4/5] ARM: rockchip: add support for rk3188 and Radxa Rock board Heiko Stübner 2013-10-15 11:08 ` Heiko Stübner 2013-10-15 11:01 ` [PATCH 5/5] MAINTAINERS: Add maintainers entry for Rockchip SoCs Heiko Stübner
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.