From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 4/7] ath10k: fix scheduling while atomic config bug
Date: Tue, 15 Oct 2013 21:47:02 +0300 [thread overview]
Message-ID: <20131015184702.14123.63521.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20131015184548.14123.56949.stgit@localhost6.localdomain6>
From: Michal Kazior <michal.kazior@tieto.com>
Recent HTC/WMI changes introduced the bug. ath10k
was using _atomic iteration function with
sleepable functions.
mac80211 provides another iteration function but
it cannot be safely called in hw_config() callback
due to local->iflist_mtx being possibly acquired
already.
The patch uses internal vif list for iteration
purposes and removes/refactors no longer necessary
_iter functions.
Reported-By: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 146 ++++++++++++++-------------------
1 file changed, 62 insertions(+), 84 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index c8e4180..bd42a14 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -723,35 +723,30 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
/*
* Review this when mac80211 gains per-interface powersave support.
*/
-static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
{
- struct ath10k_generic_iter *ar_iter = data;
- struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_conf *conf = &ar->hw->conf;
enum wmi_sta_powersave_param param;
enum wmi_sta_ps_mode psmode;
int ret;
lockdep_assert_held(&arvif->ar->conf_mutex);
- if (vif->type != NL80211_IFTYPE_STATION)
- return;
+ if (arvif->vif->type != NL80211_IFTYPE_STATION)
+ return 0;
if (conf->flags & IEEE80211_CONF_PS) {
psmode = WMI_STA_PS_MODE_ENABLED;
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
- ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
- arvif->vdev_id,
- param,
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
conf->dynamic_ps_timeout);
if (ret) {
ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
arvif->vdev_id);
- return;
+ return ret;
}
-
- ar_iter->ret = ret;
} else {
psmode = WMI_STA_PS_MODE_DISABLED;
}
@@ -759,11 +754,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
arvif->vdev_id, psmode ? "enable" : "disable");
- ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
- psmode);
- if (ar_iter->ret)
+ ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
+ if (ret) {
ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
psmode, arvif->vdev_id);
+ return ret;
+ }
+
+ return 0;
}
/**********************/
@@ -1959,9 +1957,10 @@ static void ath10k_stop(struct ieee80211_hw *hw)
cancel_work_sync(&ar->restart_work);
}
-static void ath10k_config_ps(struct ath10k *ar)
+static int ath10k_config_ps(struct ath10k *ar)
{
- struct ath10k_generic_iter ar_iter;
+ struct ath10k_vif *arvif;
+ int ret = 0;
lockdep_assert_held(&ar->conf_mutex);
@@ -1970,17 +1969,17 @@ static void ath10k_config_ps(struct ath10k *ar)
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
if (ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ return 0;
- ieee80211_iterate_active_interfaces_atomic(
- ar->hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_ps_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ret = ath10k_mac_vif_setup_ps(arvif);
+ if (ret) {
+ ath10k_warn("could not setup powersave (%d)\n", ret);
+ break;
+ }
+ }
- if (ar_iter.ret)
- ath10k_warn("failed to set ps config (%d)\n", ar_iter.ret);
+ return ret;
}
static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
@@ -2882,86 +2881,65 @@ static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
* Both RTS and Fragmentation threshold are interface-specific
* in ath10k, but device-specific in mac80211.
*/
-static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
-{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
- lockdep_assert_held(&arvif->ar->conf_mutex);
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
+ int ret = 0;
/* During HW reconfiguration mac80211 reports all interfaces that were
* running until reconfiguration was started. Since FW doesn't have any
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
- arvif->vdev_id, rts);
-
- ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
- if (ar_iter->ret)
- ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
- arvif->vdev_id);
-}
-
-static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct ath10k_generic_iter ar_iter;
- struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ if (ar->state == ATH10K_STATE_RESTARTED)
+ return 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_rts_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set rts threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
mutex_unlock(&ar->conf_mutex);
- return ar_iter.ret;
+ return ret;
}
-static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
-
- lockdep_assert_held(&arvif->ar->conf_mutex);
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
+ int ret = 0;
/* During HW reconfiguration mac80211 reports all interfaces that were
* running until reconfiguration was started. Since FW doesn't have any
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
- arvif->vdev_id, frag);
-
- ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
- if (ar_iter->ret)
- ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
- arvif->vdev_id);
-}
-
-static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct ath10k_generic_iter ar_iter;
- struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ if (ar->state == ATH10K_STATE_RESTARTED)
+ return 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_frag_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set fragmentation threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
mutex_unlock(&ar->conf_mutex);
- return ar_iter.ret;
+ return ret;
}
static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 4/7] ath10k: fix scheduling while atomic config bug
Date: Tue, 15 Oct 2013 21:47:02 +0300 [thread overview]
Message-ID: <20131015184702.14123.63521.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20131015184548.14123.56949.stgit@localhost6.localdomain6>
From: Michal Kazior <michal.kazior@tieto.com>
Recent HTC/WMI changes introduced the bug. ath10k
was using _atomic iteration function with
sleepable functions.
mac80211 provides another iteration function but
it cannot be safely called in hw_config() callback
due to local->iflist_mtx being possibly acquired
already.
The patch uses internal vif list for iteration
purposes and removes/refactors no longer necessary
_iter functions.
Reported-By: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 146 ++++++++++++++-------------------
1 file changed, 62 insertions(+), 84 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index c8e4180..bd42a14 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -723,35 +723,30 @@ static void ath10k_control_ibss(struct ath10k_vif *arvif,
/*
* Review this when mac80211 gains per-interface powersave support.
*/
-static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
{
- struct ath10k_generic_iter *ar_iter = data;
- struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_conf *conf = &ar->hw->conf;
enum wmi_sta_powersave_param param;
enum wmi_sta_ps_mode psmode;
int ret;
lockdep_assert_held(&arvif->ar->conf_mutex);
- if (vif->type != NL80211_IFTYPE_STATION)
- return;
+ if (arvif->vif->type != NL80211_IFTYPE_STATION)
+ return 0;
if (conf->flags & IEEE80211_CONF_PS) {
psmode = WMI_STA_PS_MODE_ENABLED;
param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
- ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
- arvif->vdev_id,
- param,
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
conf->dynamic_ps_timeout);
if (ret) {
ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
arvif->vdev_id);
- return;
+ return ret;
}
-
- ar_iter->ret = ret;
} else {
psmode = WMI_STA_PS_MODE_DISABLED;
}
@@ -759,11 +754,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
arvif->vdev_id, psmode ? "enable" : "disable");
- ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
- psmode);
- if (ar_iter->ret)
+ ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode);
+ if (ret) {
ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
psmode, arvif->vdev_id);
+ return ret;
+ }
+
+ return 0;
}
/**********************/
@@ -1959,9 +1957,10 @@ static void ath10k_stop(struct ieee80211_hw *hw)
cancel_work_sync(&ar->restart_work);
}
-static void ath10k_config_ps(struct ath10k *ar)
+static int ath10k_config_ps(struct ath10k *ar)
{
- struct ath10k_generic_iter ar_iter;
+ struct ath10k_vif *arvif;
+ int ret = 0;
lockdep_assert_held(&ar->conf_mutex);
@@ -1970,17 +1969,17 @@ static void ath10k_config_ps(struct ath10k *ar)
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
if (ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ return 0;
- ieee80211_iterate_active_interfaces_atomic(
- ar->hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_ps_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ret = ath10k_mac_vif_setup_ps(arvif);
+ if (ret) {
+ ath10k_warn("could not setup powersave (%d)\n", ret);
+ break;
+ }
+ }
- if (ar_iter.ret)
- ath10k_warn("failed to set ps config (%d)\n", ar_iter.ret);
+ return ret;
}
static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
@@ -2882,86 +2881,65 @@ static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
* Both RTS and Fragmentation threshold are interface-specific
* in ath10k, but device-specific in mac80211.
*/
-static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
-{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
- lockdep_assert_held(&arvif->ar->conf_mutex);
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
+ int ret = 0;
/* During HW reconfiguration mac80211 reports all interfaces that were
* running until reconfiguration was started. Since FW doesn't have any
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
- arvif->vdev_id, rts);
-
- ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
- if (ar_iter->ret)
- ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
- arvif->vdev_id);
-}
-
-static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct ath10k_generic_iter ar_iter;
- struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ if (ar->state == ATH10K_STATE_RESTARTED)
+ return 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_rts_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set rts threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
mutex_unlock(&ar->conf_mutex);
- return ar_iter.ret;
+ return ret;
}
-static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
{
- struct ath10k_generic_iter *ar_iter = data;
- struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
- u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
-
- lockdep_assert_held(&arvif->ar->conf_mutex);
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
+ int ret = 0;
/* During HW reconfiguration mac80211 reports all interfaces that were
* running until reconfiguration was started. Since FW doesn't have any
* vdevs at this point we must not iterate over this interface list.
* This setting will be updated upon add_interface(). */
- if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
- return;
-
- ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
- arvif->vdev_id, frag);
-
- ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
- if (ar_iter->ret)
- ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
- arvif->vdev_id);
-}
-
-static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
-{
- struct ath10k_generic_iter ar_iter;
- struct ath10k *ar = hw->priv;
-
- memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
- ar_iter.ar = ar;
+ if (ar->state == ATH10K_STATE_RESTARTED)
+ return 0;
mutex_lock(&ar->conf_mutex);
- ieee80211_iterate_active_interfaces_atomic(
- hw, IEEE80211_IFACE_ITER_NORMAL,
- ath10k_set_frag_iter, &ar_iter);
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation threshold %d\n",
+ arvif->vdev_id, value);
+
+ ret = ath10k_mac_set_rts(arvif, value);
+ if (ret) {
+ ath10k_warn("could not set fragmentation threshold for vdev %d (%d)\n",
+ arvif->vdev_id, ret);
+ break;
+ }
+ }
mutex_unlock(&ar->conf_mutex);
- return ar_iter.ret;
+ return ret;
}
static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
next prev parent reply other threads:[~2013-10-15 18:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-15 18:46 [PATCH 0/7] ath10k: fix WMI atomic usage Kalle Valo
2013-10-15 18:46 ` Kalle Valo
2013-10-15 18:46 ` [PATCH 1/7] ath10k: use workqueue to set WEP TX key Kalle Valo
2013-10-15 18:46 ` Kalle Valo
2013-10-15 18:46 ` [PATCH 2/7] ath10k: fix add_interface failure handling Kalle Valo
2013-10-15 18:46 ` Kalle Valo
2013-10-15 18:46 ` [PATCH 3/7] ath10k: track vif list internally Kalle Valo
2013-10-15 18:46 ` Kalle Valo
2013-10-15 18:49 ` Kalle Valo
2013-10-15 18:49 ` Kalle Valo
2013-10-15 19:37 ` Michal Kazior
2013-10-15 19:37 ` Michal Kazior
2013-10-16 12:47 ` Kalle Valo
2013-10-16 12:47 ` Kalle Valo
2013-10-15 18:47 ` Kalle Valo [this message]
2013-10-15 18:47 ` [PATCH 4/7] ath10k: fix scheduling while atomic config bug Kalle Valo
2013-10-15 18:47 ` [PATCH 5/7] ath10k: remove unnecessary checks Kalle Valo
2013-10-15 18:47 ` Kalle Valo
2013-10-15 18:47 ` [PATCH 6/7] ath10k: fix ath10k_bss_assoc() to not sleep in atomic context Kalle Valo
2013-10-15 18:47 ` Kalle Valo
2013-10-15 18:47 ` [PATCH 7/7] ath10k: add might_sleep() to ath10k_wmi_cmd_send() Kalle Valo
2013-10-15 18:47 ` Kalle Valo
2013-10-16 12:48 ` [PATCH 0/7] ath10k: fix WMI atomic usage Kalle Valo
2013-10-16 12:48 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131015184702.14123.63521.stgit@localhost6.localdomain6 \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.