From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Pekon Gupta <pekon@ti.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
ijc+devicetree@hellion.org.uk, linux-omap@vger.kernel.org,
arnd@arndb.de, Pawel.Moll@arm.com, dedekind1@gmail.com,
tony@atomide.com, avinashphilipk@gmail.com,
swarren@wwwdotorg.org, jp.francois@cynove.com, balbi@ti.com,
robherring2@gmail.com, bcousson@baylibre.com, olof@lixom.net,
linux-mtd@lists.infradead.org, ivan.djelic@parrot.com,
computersforpeace@gmail.com, dwmw2@infradead.org
Subject: Re: [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
Date: Fri, 25 Oct 2013 07:56:27 -0300 [thread overview]
Message-ID: <20131025105627.GB2489@localhost> (raw)
In-Reply-To: <1382619026-4182-1-git-send-email-pekon@ti.com>
Pekon,
On Thu, Oct 24, 2013 at 06:20:16PM +0530, Pekon Gupta wrote:
> *changes v10 -> v11*
> - [PATCH v10 04/10] replaced with newer [PATCH v11 04/11] so that
> nand_scan_ident() is called only once.
> discussion thread with Brian Norris <computersforpeace@gmail.com>
> <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049335.html>
> - No change in any other patch
>
>
> *changes v9 -> v10*
> [PATCH 1/10], [PATCH 2/10]
> swapped [PATCH v9 1/9] and [PATCH v9 2/9] so that DT parsing updates
> (with backward compatibility) happen before the deprecation of DT values.
> This way DTB does not break functionally between the patches.
> [PATCH 3/10] <no update>
> [PATCH 4/10]
> dropped [PATCH v9 4/9] introducing NAND_BUSWIDTH_AUTO, instead
> using DT 'nand-bus-width' for device bus-width. Refer discussion thread
> <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049198.html>
> [PATCH 5/10] <no update>
> [PATCH 6/10] <no update>
> [PATCH 7/10]
> separated out drivers/mtd/nand/Kconfig updates into separate [PATCH v10 10/10]
> cleanup: s/info->nand\./nand_chip->
> [PATCH 8/10] <no update>
> [PATCH 9/10] cleanup: s/out_release_mem_region/return_error
> [PATCH 10/10] <new> spawned from [PATCH v9 8/9] for Kconfig updates
>
>
> *changes v8 -> v9*
> [PATCH 1/9] <no update from [PATCH v8 1/6]>
> [PATCH 2/9] <only commit log updated from [PATCH v8 2/6]>
> As per feedbacks from Brian Norris <computersforpeace@gmail.com> previous
> revision [PATCH v8 3/6] and [PATCH 4/6] are split into following sub-patches:
> - [PATCH 3/9] <new> replaces local reference with generic names (mtd, nand_chip)
> - [PATCH 4/9] <new> enables auto-detection of bus-width
> - [PATCH 5/9] <new> removes omap3_init_bch: populates ecc-scheme data
> - [PATCH 6/9] <new> removes omap3_init_bch_tail: populates ecc-layout
> - [PATCH 7/9] <new> replaces lib/bch.c with nand_bch.c wrapper
> [PATCH 8/9] <no update same as [PATCH v8 5/6]
> [PATCH 9/9] removed devm_free_xx functions
>
>
> *Changes v7 -> v8*
> [PATCH 1/6] <no updates>
> [PATCH 2/6]
> - updated DT parsing of "ti,nand-ecc-opts" so that its "ham1" remains
> compatible to "sw","hw","hw-romcode"
> - updated DT parsing of "ti,elm-id" to retain compatibility to "elm_id"
> - using of_parse_phandle() to get ELM device pointer from DT
> [PATCH 3..6/6] <commit log updates>
>
>
> *Changes v6 -> v7*
> [PATCH 1/6] <NEW> split from [PATCH v6 2/4] as per feedbacks from Brian Norris <computersforpeace@gmail.com>
> [PATCH 2/6] incorporated feedbacks from DT maintainers
> [PATCH 3/6] cleaned and incorporated feedbacks from Brian Norris <computersforpeace@gmail.com>
> [PATCH 4/6] rebasing changes and cleanup
> [PATCH 5/6] updated omap3430-sdp.dts
> [PATCH 6/6] <NEW> updated for devm_xx
>
>
> *Changes v5 -> v6*
> [PATCH 1/4]:
> - updated DT binding for gpmc-nand based on 'Olof Johansson's feedbacks
> http://lists.infradead.org/pipermail/linux-mtd/2013-August/048394.html
> - detection of ELM device via ti,elm-id DT node, moved to gpmc.c driver
> [PATCH 2/4]
> - removed: support for following obselete ECC schemes
> OMAP_ECC_HAMMING_CODE_DEFAULT (S/W based 1-bit Hamming ECC)
> OMAP_ECC_HAMMING_CODE_HW_ROMCODE (H/W based 1-bit Hamming ECC scheme)
> - updated: using omap_oobinfo as chip->ecc.layout for all ecc-schemes
> - clean: error messages
> [PATCH 3/4] cleaned to include changes for OMAP_ECC_BCH8_CODE_HW only
> [PATCH 4/4] updated to include DT property changes
>
>
> *Changes v4 -> v5*
> - Rebased to linux-next
> IMPORTANT: Need to revert commit fb1585b, [PATCH 2/4] part of previous version
> http://lists.infradead.org/pipermail/linux-mtd/2013-July/047441.html
>
> - Swapped PATCH-1 & PATCH-2 to maintain bisectibility & compilation dependency
> http://lists.infradead.org/pipermail/linux-mtd/2013-July/047461.html
>
> - PATCH-2: re-ordered call to is_elm_present() for later updates ELM driver
> - dropped changes in include/linux/platform_data/elm.h (not needed)
> - PATCH-3: re-ordered call to is_elm_present() for later updates ELM driver
> - Re-formated patch description (replaced tabs with white-spaces)
>
>
> *Changes v3 -> v4*
> (Resent with CC: devicetree-discuss@lists.ozlabs.org)
> - [Patch 1/3] removed MTD_NAND_OMAP_BCH8 & MTD_NAND_OMAP_BCH4 from nand/Kconfig
> ECC scheme selectable via nand DT (nand-ecc-opt).
> - [*] rebased for l2-mtd.git
>
>
> *Changes v2 -> v3*
> (Resent with Author Name fixed)
> - PATCH-1: re-arranged code to remove redundancy, added NAND_BUSWIDTH_AUTO
> - PATCH-2: updated nand-ecc-opt DT mapping and Documentation
> - PATCH-3: code-cleaning + changes to match PATCH-1
> - PATCH-4 <DROPPED> update DT attribute for ti,nand-ecc-opt
> - received feedback to keep DT mapping independent of linuxism
> - PATCH-4:<NEW> : ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
> - independent patch for AM335x-evm.dts update based on PATCH-2
>
>
> *Changes v1 -> v2*
> added [PATCH 3/4] and [PATCH 4/4]
>
>
> After this patch series, omap2-nand driver will supports following ECC schemes:
> +---------------------------------------+---------------+---------------+
> | ECC scheme |ECC calculation|Error detection|
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH) | | |
> | | | |
> |OMAP_ECC_BCH4_CODE_HW |H/W (GPMC) |H/W (ELM) |
> | (needs CONFIG_MTD_NAND_OMAP_BCH && | | |
> | ti,elm-id) | | |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH) | | |
> | | | |
> |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) |
> | (needs CONFIG_MTD_NAND_OMAP_BCH && | | |
> | ti,elm-id) | | |
> +---------------------------------------+---------------+---------------+
>
>
> Pekon Gupta (10):
> ARM: OMAP2+: cleaned-up DT support of various ECC schemes
> mtd: nand: omap: combine different flavours of 1-bit hamming ecc
> schemes
> mtd: nand: omap: cleanup: replace local references with generic
> framework names
> mtd: nand: omap: use DT specified bus-width only for scanning NAND
> device
> mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in
> device_probe
> mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
> mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC
> instead of lib/bch.c
> ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
> mtd: nand: omap: updated devm_xx for all resource allocation and free
> calls
> mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
>
> .../devicetree/bindings/mtd/gpmc-nand.txt | 16 +-
> arch/arm/boot/dts/am335x-evm.dts | 3 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> arch/arm/mach-omap2/board-flash.c | 2 +-
> arch/arm/mach-omap2/gpmc.c | 48 +-
> drivers/mtd/nand/Kconfig | 40 +-
> drivers/mtd/nand/omap2.c | 641 +++++++++------------
> include/linux/platform_data/mtd-nand-omap2.h | 18 +-
> 8 files changed, 348 insertions(+), 422 deletions(-)
>
I tested this using the AM335x device tree you posted earlier with
the 16-bit NAND Beaglebone cape. For all the patches:
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The ECC bindings look much much cleaner now, nice job!
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
To: Pekon Gupta <pekon@ti.com>
Cc: mark.rutland@arm.com, olof@lixom.net,
computersforpeace@gmail.com, dedekind1@gmail.com,
devicetree@vger.kernel.org, Pawel.Moll@arm.com, arnd@arndb.de,
swarren@wwwdotorg.org, tony@atomide.com, jp.francois@cynove.com,
ijc+devicetree@hellion.org.uk, avinashphilipk@gmail.com,
balbi@ti.com, robherring2@gmail.com, bcousson@baylibre.com,
linux-mtd@lists.infradead.org, ivan.djelic@parrot.com,
linux-omap@vger.kernel.org, dwmw2@infradead.org
Subject: Re: [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes
Date: Fri, 25 Oct 2013 07:56:27 -0300 [thread overview]
Message-ID: <20131025105627.GB2489@localhost> (raw)
In-Reply-To: <1382619026-4182-1-git-send-email-pekon@ti.com>
Pekon,
On Thu, Oct 24, 2013 at 06:20:16PM +0530, Pekon Gupta wrote:
> *changes v10 -> v11*
> - [PATCH v10 04/10] replaced with newer [PATCH v11 04/11] so that
> nand_scan_ident() is called only once.
> discussion thread with Brian Norris <computersforpeace@gmail.com>
> <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049335.html>
> - No change in any other patch
>
>
> *changes v9 -> v10*
> [PATCH 1/10], [PATCH 2/10]
> swapped [PATCH v9 1/9] and [PATCH v9 2/9] so that DT parsing updates
> (with backward compatibility) happen before the deprecation of DT values.
> This way DTB does not break functionally between the patches.
> [PATCH 3/10] <no update>
> [PATCH 4/10]
> dropped [PATCH v9 4/9] introducing NAND_BUSWIDTH_AUTO, instead
> using DT 'nand-bus-width' for device bus-width. Refer discussion thread
> <http://lists.infradead.org/pipermail/linux-mtd/2013-October/049198.html>
> [PATCH 5/10] <no update>
> [PATCH 6/10] <no update>
> [PATCH 7/10]
> separated out drivers/mtd/nand/Kconfig updates into separate [PATCH v10 10/10]
> cleanup: s/info->nand\./nand_chip->
> [PATCH 8/10] <no update>
> [PATCH 9/10] cleanup: s/out_release_mem_region/return_error
> [PATCH 10/10] <new> spawned from [PATCH v9 8/9] for Kconfig updates
>
>
> *changes v8 -> v9*
> [PATCH 1/9] <no update from [PATCH v8 1/6]>
> [PATCH 2/9] <only commit log updated from [PATCH v8 2/6]>
> As per feedbacks from Brian Norris <computersforpeace@gmail.com> previous
> revision [PATCH v8 3/6] and [PATCH 4/6] are split into following sub-patches:
> - [PATCH 3/9] <new> replaces local reference with generic names (mtd, nand_chip)
> - [PATCH 4/9] <new> enables auto-detection of bus-width
> - [PATCH 5/9] <new> removes omap3_init_bch: populates ecc-scheme data
> - [PATCH 6/9] <new> removes omap3_init_bch_tail: populates ecc-layout
> - [PATCH 7/9] <new> replaces lib/bch.c with nand_bch.c wrapper
> [PATCH 8/9] <no update same as [PATCH v8 5/6]
> [PATCH 9/9] removed devm_free_xx functions
>
>
> *Changes v7 -> v8*
> [PATCH 1/6] <no updates>
> [PATCH 2/6]
> - updated DT parsing of "ti,nand-ecc-opts" so that its "ham1" remains
> compatible to "sw","hw","hw-romcode"
> - updated DT parsing of "ti,elm-id" to retain compatibility to "elm_id"
> - using of_parse_phandle() to get ELM device pointer from DT
> [PATCH 3..6/6] <commit log updates>
>
>
> *Changes v6 -> v7*
> [PATCH 1/6] <NEW> split from [PATCH v6 2/4] as per feedbacks from Brian Norris <computersforpeace@gmail.com>
> [PATCH 2/6] incorporated feedbacks from DT maintainers
> [PATCH 3/6] cleaned and incorporated feedbacks from Brian Norris <computersforpeace@gmail.com>
> [PATCH 4/6] rebasing changes and cleanup
> [PATCH 5/6] updated omap3430-sdp.dts
> [PATCH 6/6] <NEW> updated for devm_xx
>
>
> *Changes v5 -> v6*
> [PATCH 1/4]:
> - updated DT binding for gpmc-nand based on 'Olof Johansson's feedbacks
> http://lists.infradead.org/pipermail/linux-mtd/2013-August/048394.html
> - detection of ELM device via ti,elm-id DT node, moved to gpmc.c driver
> [PATCH 2/4]
> - removed: support for following obselete ECC schemes
> OMAP_ECC_HAMMING_CODE_DEFAULT (S/W based 1-bit Hamming ECC)
> OMAP_ECC_HAMMING_CODE_HW_ROMCODE (H/W based 1-bit Hamming ECC scheme)
> - updated: using omap_oobinfo as chip->ecc.layout for all ecc-schemes
> - clean: error messages
> [PATCH 3/4] cleaned to include changes for OMAP_ECC_BCH8_CODE_HW only
> [PATCH 4/4] updated to include DT property changes
>
>
> *Changes v4 -> v5*
> - Rebased to linux-next
> IMPORTANT: Need to revert commit fb1585b, [PATCH 2/4] part of previous version
> http://lists.infradead.org/pipermail/linux-mtd/2013-July/047441.html
>
> - Swapped PATCH-1 & PATCH-2 to maintain bisectibility & compilation dependency
> http://lists.infradead.org/pipermail/linux-mtd/2013-July/047461.html
>
> - PATCH-2: re-ordered call to is_elm_present() for later updates ELM driver
> - dropped changes in include/linux/platform_data/elm.h (not needed)
> - PATCH-3: re-ordered call to is_elm_present() for later updates ELM driver
> - Re-formated patch description (replaced tabs with white-spaces)
>
>
> *Changes v3 -> v4*
> (Resent with CC: devicetree-discuss@lists.ozlabs.org)
> - [Patch 1/3] removed MTD_NAND_OMAP_BCH8 & MTD_NAND_OMAP_BCH4 from nand/Kconfig
> ECC scheme selectable via nand DT (nand-ecc-opt).
> - [*] rebased for l2-mtd.git
>
>
> *Changes v2 -> v3*
> (Resent with Author Name fixed)
> - PATCH-1: re-arranged code to remove redundancy, added NAND_BUSWIDTH_AUTO
> - PATCH-2: updated nand-ecc-opt DT mapping and Documentation
> - PATCH-3: code-cleaning + changes to match PATCH-1
> - PATCH-4 <DROPPED> update DT attribute for ti,nand-ecc-opt
> - received feedback to keep DT mapping independent of linuxism
> - PATCH-4:<NEW> : ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
> - independent patch for AM335x-evm.dts update based on PATCH-2
>
>
> *Changes v1 -> v2*
> added [PATCH 3/4] and [PATCH 4/4]
>
>
> After this patch series, omap2-nand driver will supports following ECC schemes:
> +---------------------------------------+---------------+---------------+
> | ECC scheme |ECC calculation|Error detection|
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH4_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH) | | |
> | | | |
> |OMAP_ECC_BCH4_CODE_HW |H/W (GPMC) |H/W (ELM) |
> | (needs CONFIG_MTD_NAND_OMAP_BCH && | | |
> | ti,elm-id) | | |
> +---------------------------------------+---------------+---------------+
> |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W (lib/bch.c)|
> | (needs CONFIG_MTD_NAND_ECC_BCH) | | |
> | | | |
> |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) |
> | (needs CONFIG_MTD_NAND_OMAP_BCH && | | |
> | ti,elm-id) | | |
> +---------------------------------------+---------------+---------------+
>
>
> Pekon Gupta (10):
> ARM: OMAP2+: cleaned-up DT support of various ECC schemes
> mtd: nand: omap: combine different flavours of 1-bit hamming ecc
> schemes
> mtd: nand: omap: cleanup: replace local references with generic
> framework names
> mtd: nand: omap: use DT specified bus-width only for scanning NAND
> device
> mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in
> device_probe
> mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
> mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC
> instead of lib/bch.c
> ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
> mtd: nand: omap: updated devm_xx for all resource allocation and free
> calls
> mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
>
> .../devicetree/bindings/mtd/gpmc-nand.txt | 16 +-
> arch/arm/boot/dts/am335x-evm.dts | 3 +-
> arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
> arch/arm/mach-omap2/board-flash.c | 2 +-
> arch/arm/mach-omap2/gpmc.c | 48 +-
> drivers/mtd/nand/Kconfig | 40 +-
> drivers/mtd/nand/omap2.c | 641 +++++++++------------
> include/linux/platform_data/mtd-nand-omap2.h | 18 +-
> 8 files changed, 348 insertions(+), 422 deletions(-)
>
I tested this using the AM335x device tree you posted earlier with
the 16-bit NAND Beaglebone cape. For all the patches:
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
The ECC bindings look much much cleaner now, nice job!
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-25 10:57 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 12:50 [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 01/10] ARM: OMAP2+: cleaned-up DT support of various " Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 02/10] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 03/10] mtd: nand: omap: cleanup: replace local references with generic framework names Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 21:27 ` Ezequiel Garcia
2013-10-24 21:27 ` Ezequiel Garcia
2013-10-24 22:43 ` Brian Norris
2013-10-24 22:43 ` Brian Norris
2013-10-24 22:49 ` Ezequiel Garcia
2013-10-24 22:49 ` Ezequiel Garcia
2013-10-24 12:50 ` [PATCH v11 05/10] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 06/10] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 07/10] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 08/10] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 09/10] mtd: nand: omap: updated devm_xx for all resource allocation and free calls Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta
2013-10-24 13:52 ` [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes Ezequiel Garcia
2013-10-24 13:52 ` Ezequiel Garcia
2013-10-30 3:59 ` Brian Norris
2013-10-30 3:59 ` Brian Norris
2013-10-30 9:16 ` Ezequiel Garcia
2013-10-30 9:16 ` Ezequiel Garcia
2013-10-30 21:30 ` Gupta, Pekon
2013-10-30 21:30 ` Gupta, Pekon
2013-10-31 21:23 ` Tony Lindgren
2013-10-31 21:23 ` Tony Lindgren
2013-11-01 20:10 ` Gupta, Pekon
2013-11-01 20:10 ` Gupta, Pekon
2013-10-25 10:56 ` Ezequiel Garcia [this message]
2013-10-25 10:56 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131025105627.GB2489@localhost \
--to=ezequiel.garcia@free-electrons.com \
--cc=Pawel.Moll@arm.com \
--cc=arnd@arndb.de \
--cc=avinashphilipk@gmail.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=ivan.djelic@parrot.com \
--cc=jp.francois@cynove.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=pekon@ti.com \
--cc=robherring2@gmail.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.