From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code
Date: Wed, 06 Nov 2013 23:21:29 +0000 [thread overview]
Message-ID: <20131106232129.8081.77546.sendpatchset@w520> (raw)
In-Reply-To: <20131106232102.8081.20523.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Remove the C and platform device version of KZM9D.
The DT version of KZM9D board support can now instead
directly be used with SoC specific code in setup-emev2.c.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/Kconfig | 6 --
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/Makefile.boot | 1
arch/arm/mach-shmobile/board-kzm9d.c | 92 ----------------------------------
4 files changed, 100 deletions(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-11-05 15:36:05.000000000 +0900
@@ -245,12 +245,6 @@ config MACH_KOELSCH_REFERENCE
This is intended to aid developers
-config MACH_KZM9D
- bool "KZM9D board"
- depends on ARCH_EMEV2
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
-
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-11-05 15:35:45.000000000 +0900
@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_ARMADILLO800EVA) += bo
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
obj-$(CONFIG_MACH_KOELSCH_REFERENCE) += board-koelsch-reference.o
-obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
--- 0001/arch/arm/mach-shmobile/Makefile.boot
+++ work/arch/arm/mach-shmobile/Makefile.boot 2013-11-05 15:36:46.000000000 +0900
@@ -9,7 +9,6 @@ loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE)
loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000
-loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
--- 0001/arch/arm/mach-shmobile/board-kzm9d.c
+++ /dev/null 2013-06-03 21:41:10.638032047 +0900
@@ -1,92 +0,0 @@
-/*
- * kzm9d board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* Ether */
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x20000000,
- .end = 0x2000ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = EMEV2_GPIO_IRQ(1),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
- .flags = SMSC911X_USE_32BIT,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_platdata,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static struct platform_device *kzm9d_devices[] __initdata = {
- &smsc91x_device,
-};
-
-void __init kzm9d_add_standard_devices(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- emev2_add_standard_devices();
-
- platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
- "renesas,kzm9d",
- NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
- .smp = smp_ops(emev2_smp_ops),
- .map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = kzm9d_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = kzm9d_boards_compat_dt,
-MACHINE_END
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code
Date: Thu, 07 Nov 2013 08:21:29 +0900 [thread overview]
Message-ID: <20131106232129.8081.77546.sendpatchset@w520> (raw)
In-Reply-To: <20131106232102.8081.20523.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Remove the C and platform device version of KZM9D.
The DT version of KZM9D board support can now instead
directly be used with SoC specific code in setup-emev2.c.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/mach-shmobile/Kconfig | 6 --
arch/arm/mach-shmobile/Makefile | 1
arch/arm/mach-shmobile/Makefile.boot | 1
arch/arm/mach-shmobile/board-kzm9d.c | 92 ----------------------------------
4 files changed, 100 deletions(-)
--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig 2013-11-05 15:36:05.000000000 +0900
@@ -245,12 +245,6 @@ config MACH_KOELSCH_REFERENCE
This is intended to aid developers
-config MACH_KZM9D
- bool "KZM9D board"
- depends on ARCH_EMEV2
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
-
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
--- 0001/arch/arm/mach-shmobile/Makefile
+++ work/arch/arm/mach-shmobile/Makefile 2013-11-05 15:35:45.000000000 +0900
@@ -72,7 +72,6 @@ obj-$(CONFIG_MACH_ARMADILLO800EVA) += bo
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
obj-$(CONFIG_MACH_KOELSCH_REFERENCE) += board-koelsch-reference.o
-obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
--- 0001/arch/arm/mach-shmobile/Makefile.boot
+++ work/arch/arm/mach-shmobile/Makefile.boot 2013-11-05 15:36:46.000000000 +0900
@@ -9,7 +9,6 @@ loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE)
loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000
-loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
--- 0001/arch/arm/mach-shmobile/board-kzm9d.c
+++ /dev/null 2013-06-03 21:41:10.638032047 +0900
@@ -1,92 +0,0 @@
-/*
- * kzm9d board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* Ether */
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x20000000,
- .end = 0x2000ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = EMEV2_GPIO_IRQ(1),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
- .flags = SMSC911X_USE_32BIT,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_platdata,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static struct platform_device *kzm9d_devices[] __initdata = {
- &smsc91x_device,
-};
-
-void __init kzm9d_add_standard_devices(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- emev2_add_standard_devices();
-
- platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
- "renesas,kzm9d",
- NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
- .smp = smp_ops(emev2_smp_ops),
- .map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = kzm9d_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = kzm9d_boards_compat_dt,
-MACHINE_END
next prev parent reply other threads:[~2013-11-06 23:21 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-06 23:21 [PATCH 00/04] ARM: shmobile: KZM9D legacy board code removal Magnus Damm
2013-11-06 23:21 ` Magnus Damm
2013-11-06 23:21 ` [PATCH 01/04] ARM: shmobile: Add shared EMEV2 code for ->init_machine() Magnus Damm
2013-11-06 23:21 ` Magnus Damm
2013-11-06 23:21 ` [PATCH 02/04] ARM: shmobile: Use ->init_late() in shared EMEV2 case Magnus Damm
2013-11-06 23:21 ` Magnus Damm
2013-11-06 23:21 ` Magnus Damm [this message]
2013-11-06 23:21 ` [PATCH 03/04] ARM: shmobile: Remove legacy KZM9D board code Magnus Damm
2013-11-08 8:49 ` Simon Horman
2013-11-08 8:49 ` Simon Horman
2013-11-08 10:03 ` Magnus Damm
2013-11-08 10:03 ` Magnus Damm
2013-11-08 23:34 ` Simon Horman
2013-11-08 23:34 ` Simon Horman
2013-11-06 23:21 ` [PATCH 04/04] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code Magnus Damm
2013-11-06 23:21 ` Magnus Damm
2013-11-08 7:52 ` [PATCH 00/04] ARM: shmobile: KZM9D legacy board code removal Simon Horman
2013-11-08 7:52 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131106232129.8081.77546.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.