All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: The list for a Better Approach To Mobile Ad-hoc Networking
	<b.a.t.m.a.n@lists.open-mesh.org>
Cc: devel@lists.open80211s.org,
	Johannes Berg <johannes@sipsolutions.net>,
	linux-wireless@vger.kernel.org,
	Antonio Quartulli <antonio@open-mesh.com>
Subject: Re: [B.A.T.M.A.N.] [RFCv2 1/6] cfg80211: export expected throughput through get_station()
Date: Mon, 31 Mar 2014 10:22:45 +0200	[thread overview]
Message-ID: <20140331082245.GC4311@lunn.ch> (raw)
In-Reply-To: <1396211704-4677-2-git-send-email-antonio@meshcoding.com>

On Sun, Mar 30, 2014 at 10:34:59PM +0200, Antonio Quartulli wrote:
> From: Antonio Quartulli <antonio@open-mesh.com>
> 
> Users may need information about the expected throughput
> towards a given peer computed by the RC algorithm.
> Export such value through the get_station() API.
> 
> This information is useful to the batman-adv module which
> will use it for its new metric computation.
> 
> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
> ---
>  include/net/cfg80211.h | 63 ++++++++++++++++++++++++++++----------------------
>  1 file changed, 35 insertions(+), 28 deletions(-)
> 
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index fb8afce..4c8ebe9 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -862,36 +862,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
>   * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
>   * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
>   * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
> + * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
>   */
>  enum station_info_flags {
> -	STATION_INFO_INACTIVE_TIME	= 1<<0,
> -	STATION_INFO_RX_BYTES		= 1<<1,
> -	STATION_INFO_TX_BYTES		= 1<<2,
> -	STATION_INFO_LLID		= 1<<3,
> -	STATION_INFO_PLID		= 1<<4,
> -	STATION_INFO_PLINK_STATE	= 1<<5,
> -	STATION_INFO_SIGNAL		= 1<<6,
> -	STATION_INFO_TX_BITRATE		= 1<<7,
> -	STATION_INFO_RX_PACKETS		= 1<<8,
> -	STATION_INFO_TX_PACKETS		= 1<<9,
> -	STATION_INFO_TX_RETRIES		= 1<<10,
> -	STATION_INFO_TX_FAILED		= 1<<11,
> -	STATION_INFO_RX_DROP_MISC	= 1<<12,
> -	STATION_INFO_SIGNAL_AVG		= 1<<13,
> -	STATION_INFO_RX_BITRATE		= 1<<14,
> -	STATION_INFO_BSS_PARAM          = 1<<15,
> -	STATION_INFO_CONNECTED_TIME	= 1<<16,
> -	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
> -	STATION_INFO_STA_FLAGS		= 1<<18,
> -	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
> -	STATION_INFO_T_OFFSET		= 1<<20,
> -	STATION_INFO_LOCAL_PM		= 1<<21,
> -	STATION_INFO_PEER_PM		= 1<<22,
> -	STATION_INFO_NONPEER_PM		= 1<<23,
> -	STATION_INFO_RX_BYTES64		= 1<<24,
> -	STATION_INFO_TX_BYTES64		= 1<<25,
> -	STATION_INFO_CHAIN_SIGNAL	= 1<<26,
> -	STATION_INFO_CHAIN_SIGNAL_AVG	= 1<<27,
> +	STATION_INFO_INACTIVE_TIME		= 1<<0,
> +	STATION_INFO_RX_BYTES			= 1<<1,
> +	STATION_INFO_TX_BYTES			= 1<<2,
> +	STATION_INFO_LLID			= 1<<3,
> +	STATION_INFO_PLID			= 1<<4,
> +	STATION_INFO_PLINK_STATE		= 1<<5,
> +	STATION_INFO_SIGNAL			= 1<<6,
> +	STATION_INFO_TX_BITRATE			= 1<<7,
> +	STATION_INFO_RX_PACKETS			= 1<<8,
> +	STATION_INFO_TX_PACKETS			= 1<<9,
> +	STATION_INFO_TX_RETRIES			= 1<<10,
> +	STATION_INFO_TX_FAILED			= 1<<11,
> +	STATION_INFO_RX_DROP_MISC		= 1<<12,
> +	STATION_INFO_SIGNAL_AVG			= 1<<13,
> +	STATION_INFO_RX_BITRATE			= 1<<14,
> +	STATION_INFO_BSS_PARAM			= 1<<15,
> +	STATION_INFO_CONNECTED_TIME		= 1<<16,
> +	STATION_INFO_ASSOC_REQ_IES		= 1<<17,
> +	STATION_INFO_STA_FLAGS			= 1<<18,
> +	STATION_INFO_BEACON_LOSS_COUNT		= 1<<19,
> +	STATION_INFO_T_OFFSET			= 1<<20,
> +	STATION_INFO_LOCAL_PM			= 1<<21,
> +	STATION_INFO_PEER_PM			= 1<<22,
> +	STATION_INFO_NONPEER_PM			= 1<<23,
> +	STATION_INFO_RX_BYTES64			= 1<<24,
> +	STATION_INFO_TX_BYTES64			= 1<<25,
> +	STATION_INFO_CHAIN_SIGNAL		= 1<<26,
> +	STATION_INFO_CHAIN_SIGNAL_AVG		= 1<<27,
> +	STATION_INFO_EXPECTED_THROUGHPUT	= 1<<28,
>  };


Hi Antonio

>  /**
> @@ -1013,6 +1015,9 @@ struct sta_bss_parameters {
>   * @local_pm: local mesh STA power save mode
>   * @peer_pm: peer mesh STA power save mode
>   * @nonpeer_pm: non-peer mesh STA power save mode
> + * @expected_throughput: expected throughput as reported by the RC algorithm
> + *  about the bitrate having the maximum throughput. This field can be filled
> + *  only by drivers using Minstrel
>   */
>  struct station_info {
>  	u32 filled;
> @@ -1051,6 +1056,8 @@ struct station_info {
>  	enum nl80211_mesh_power_mode peer_pm;
>  	enum nl80211_mesh_power_mode nonpeer_pm;
>  
> +	u32 expected_throughput;
> +

It would be nice to comment on what the units are. I known from our
BATMAN V discussions, it is something odd.

       Andrew

WARNING: multiple messages have this Message-ID (diff)
From: Andrew Lunn <andrew@lunn.ch>
To: The list for a Better Approach To Mobile Ad-hoc Networking
	<b.a.t.m.a.n@lists.open-mesh.org>
Cc: Johannes Berg <johannes@sipsolutions.net>,
	devel@lists.open80211s.org, linux-wireless@vger.kernel.org,
	Antonio Quartulli <antonio@open-mesh.com>
Subject: Re: [B.A.T.M.A.N.] [RFCv2 1/6] cfg80211: export expected throughput through get_station()
Date: Mon, 31 Mar 2014 10:22:45 +0200	[thread overview]
Message-ID: <20140331082245.GC4311@lunn.ch> (raw)
In-Reply-To: <1396211704-4677-2-git-send-email-antonio@meshcoding.com>

On Sun, Mar 30, 2014 at 10:34:59PM +0200, Antonio Quartulli wrote:
> From: Antonio Quartulli <antonio@open-mesh.com>
> 
> Users may need information about the expected throughput
> towards a given peer computed by the RC algorithm.
> Export such value through the get_station() API.
> 
> This information is useful to the batman-adv module which
> will use it for its new metric computation.
> 
> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
> ---
>  include/net/cfg80211.h | 63 ++++++++++++++++++++++++++++----------------------
>  1 file changed, 35 insertions(+), 28 deletions(-)
> 
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index fb8afce..4c8ebe9 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -862,36 +862,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
>   * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
>   * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
>   * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
> + * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
>   */
>  enum station_info_flags {
> -	STATION_INFO_INACTIVE_TIME	= 1<<0,
> -	STATION_INFO_RX_BYTES		= 1<<1,
> -	STATION_INFO_TX_BYTES		= 1<<2,
> -	STATION_INFO_LLID		= 1<<3,
> -	STATION_INFO_PLID		= 1<<4,
> -	STATION_INFO_PLINK_STATE	= 1<<5,
> -	STATION_INFO_SIGNAL		= 1<<6,
> -	STATION_INFO_TX_BITRATE		= 1<<7,
> -	STATION_INFO_RX_PACKETS		= 1<<8,
> -	STATION_INFO_TX_PACKETS		= 1<<9,
> -	STATION_INFO_TX_RETRIES		= 1<<10,
> -	STATION_INFO_TX_FAILED		= 1<<11,
> -	STATION_INFO_RX_DROP_MISC	= 1<<12,
> -	STATION_INFO_SIGNAL_AVG		= 1<<13,
> -	STATION_INFO_RX_BITRATE		= 1<<14,
> -	STATION_INFO_BSS_PARAM          = 1<<15,
> -	STATION_INFO_CONNECTED_TIME	= 1<<16,
> -	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
> -	STATION_INFO_STA_FLAGS		= 1<<18,
> -	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
> -	STATION_INFO_T_OFFSET		= 1<<20,
> -	STATION_INFO_LOCAL_PM		= 1<<21,
> -	STATION_INFO_PEER_PM		= 1<<22,
> -	STATION_INFO_NONPEER_PM		= 1<<23,
> -	STATION_INFO_RX_BYTES64		= 1<<24,
> -	STATION_INFO_TX_BYTES64		= 1<<25,
> -	STATION_INFO_CHAIN_SIGNAL	= 1<<26,
> -	STATION_INFO_CHAIN_SIGNAL_AVG	= 1<<27,
> +	STATION_INFO_INACTIVE_TIME		= 1<<0,
> +	STATION_INFO_RX_BYTES			= 1<<1,
> +	STATION_INFO_TX_BYTES			= 1<<2,
> +	STATION_INFO_LLID			= 1<<3,
> +	STATION_INFO_PLID			= 1<<4,
> +	STATION_INFO_PLINK_STATE		= 1<<5,
> +	STATION_INFO_SIGNAL			= 1<<6,
> +	STATION_INFO_TX_BITRATE			= 1<<7,
> +	STATION_INFO_RX_PACKETS			= 1<<8,
> +	STATION_INFO_TX_PACKETS			= 1<<9,
> +	STATION_INFO_TX_RETRIES			= 1<<10,
> +	STATION_INFO_TX_FAILED			= 1<<11,
> +	STATION_INFO_RX_DROP_MISC		= 1<<12,
> +	STATION_INFO_SIGNAL_AVG			= 1<<13,
> +	STATION_INFO_RX_BITRATE			= 1<<14,
> +	STATION_INFO_BSS_PARAM			= 1<<15,
> +	STATION_INFO_CONNECTED_TIME		= 1<<16,
> +	STATION_INFO_ASSOC_REQ_IES		= 1<<17,
> +	STATION_INFO_STA_FLAGS			= 1<<18,
> +	STATION_INFO_BEACON_LOSS_COUNT		= 1<<19,
> +	STATION_INFO_T_OFFSET			= 1<<20,
> +	STATION_INFO_LOCAL_PM			= 1<<21,
> +	STATION_INFO_PEER_PM			= 1<<22,
> +	STATION_INFO_NONPEER_PM			= 1<<23,
> +	STATION_INFO_RX_BYTES64			= 1<<24,
> +	STATION_INFO_TX_BYTES64			= 1<<25,
> +	STATION_INFO_CHAIN_SIGNAL		= 1<<26,
> +	STATION_INFO_CHAIN_SIGNAL_AVG		= 1<<27,
> +	STATION_INFO_EXPECTED_THROUGHPUT	= 1<<28,
>  };


Hi Antonio

>  /**
> @@ -1013,6 +1015,9 @@ struct sta_bss_parameters {
>   * @local_pm: local mesh STA power save mode
>   * @peer_pm: peer mesh STA power save mode
>   * @nonpeer_pm: non-peer mesh STA power save mode
> + * @expected_throughput: expected throughput as reported by the RC algorithm
> + *  about the bitrate having the maximum throughput. This field can be filled
> + *  only by drivers using Minstrel
>   */
>  struct station_info {
>  	u32 filled;
> @@ -1051,6 +1056,8 @@ struct station_info {
>  	enum nl80211_mesh_power_mode peer_pm;
>  	enum nl80211_mesh_power_mode nonpeer_pm;
>  
> +	u32 expected_throughput;
> +

It would be nice to comment on what the units are. I known from our
BATMAN V discussions, it is something odd.

       Andrew

  reply	other threads:[~2014-03-31  8:22 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-30 20:34 [B.A.T.M.A.N.] [RFCv2 0/6] Export the expected throughput Antonio Quartulli
2014-03-30 20:34 ` Antonio Quartulli
2014-03-30 20:34 ` [B.A.T.M.A.N.] [RFCv2 1/6] cfg80211: export expected throughput through get_station() Antonio Quartulli
2014-03-30 20:34   ` Antonio Quartulli
2014-03-31  8:22   ` Andrew Lunn [this message]
2014-03-31  8:22     ` [B.A.T.M.A.N.] " Andrew Lunn
2014-03-31  8:46     ` Antonio Quartulli
2014-03-31  8:46       ` Antonio Quartulli
2014-04-08 10:03   ` Johannes Berg
2014-04-08 10:03     ` Johannes Berg
2014-04-10 16:22     ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-10 16:22       ` Antonio Quartulli
2014-03-30 20:35 ` [B.A.T.M.A.N.] [RFCv2 2/6] mac80211: add new RC API to retrieve expected throughput Antonio Quartulli
2014-03-30 20:35   ` Antonio Quartulli
2014-04-08 10:03   ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-08 10:03     ` Johannes Berg
2014-04-10 15:46     ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-10 15:46       ` Antonio Quartulli
2014-04-10 17:13       ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-10 17:13         ` Johannes Berg
2014-04-11  7:03         ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-11  7:03           ` Antonio Quartulli
2014-04-08 10:04   ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-08 10:04     ` Johannes Berg
2014-04-10 15:53     ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-10 15:53       ` Antonio Quartulli
2014-04-10 17:14       ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-10 17:14         ` Johannes Berg
2014-04-11 11:30         ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-11 11:30           ` Antonio Quartulli
2014-03-30 20:35 ` [B.A.T.M.A.N.] [RFCv2 3/6] mac80211: export expected throughput in set_sta_info() Antonio Quartulli
2014-03-30 20:35   ` Antonio Quartulli
2014-03-30 20:35 ` [B.A.T.M.A.N.] [RFCv2 4/6] mac80211: minstrel - implement get_expected_throughput() API Antonio Quartulli
2014-03-30 20:35   ` Antonio Quartulli
2014-03-31  8:49   ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-03-31  8:49     ` Antonio Quartulli
2014-04-08 10:05   ` Johannes Berg
2014-04-08 10:05     ` Johannes Berg
2014-04-10 15:54     ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-10 15:54       ` Antonio Quartulli
2014-03-30 20:35 ` [B.A.T.M.A.N.] [RFCv2 5/6] mac80211: minstrel_ht " Antonio Quartulli
2014-03-30 20:35   ` Antonio Quartulli
2014-03-30 20:35 ` [B.A.T.M.A.N.] [RFCv2 6/6] cfg80211: implement cfg80211_get_station cfg80211 API Antonio Quartulli
2014-03-30 20:35   ` Antonio Quartulli
2014-04-08 10:06   ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-08 10:06     ` Johannes Berg
2014-04-10 16:02     ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-10 16:02       ` Antonio Quartulli
2014-04-10 17:12       ` [B.A.T.M.A.N.] " Johannes Berg
2014-04-10 17:12         ` Johannes Berg
2014-04-11  7:04         ` [B.A.T.M.A.N.] " Antonio Quartulli
2014-04-11  7:04           ` Antonio Quartulli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140331082245.GC4311@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=antonio@open-mesh.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=devel@lists.open80211s.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.