From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Cc: "Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Kevin Hilman" <khilman@linaro.org>, "Nishanth Menon" <nm@ti.com>,
"Pali Rohár" <pali.rohar@gmail.com>,
"Paul Walmsley" <paul@pwsan.com>, "Pavel Machek" <pavel@ucw.cz>,
"Sebastian Reichel" <sre@kernel.org>,
"Tero Kristo" <t-kristo@ti.com>
Subject: Re: [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default
Date: Thu, 10 Apr 2014 17:23:59 -0700 [thread overview]
Message-ID: <20140411002358.GA15737@atomide.com> (raw)
In-Reply-To: <1397173639-29587-8-git-send-email-tony@atomide.com>
* Tony Lindgren <tony@atomide.com> [140410 16:52]:
> On N900 there are nice LEDs that show the state of the
> sys_clkreq and sys_off_mode pins.
Here's a work in progress related twl4030 script for N900
to play with, I think it can be made more generic though.
This scales vdd_core to zero during off idle for me with
this series.
Regards,
Tony
8< ----------------------------
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index 8e15ec3..35b2b5f 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -5,7 +5,9 @@ to control the power resources, including power scripts. For now, the
binding only supports the complete shutdown of the system after poweroff.
Required properties:
-- compatible : must be "ti,twl4030-power"
+- compatible : Needs to be one of the following
+ "ti,twl4030-power-n900"
+ "ti,twl4030-power"
Optional properties:
- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c5db0af..3ac2b2d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -269,6 +269,11 @@
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
};
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-n900";
+ ti,use_poweroff;
+ };
};
&twl_gpio {
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 96162b6..d6b05eb 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -29,6 +29,7 @@
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/mach-types.h>
@@ -493,7 +494,8 @@ int twl4030_remove_script(u8 flags)
return err;
}
-static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
+static int
+twl4030_power_configure_scripts(const struct twl4030_power_data *pdata)
{
int err;
int i;
@@ -509,7 +511,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
return 0;
}
-static int twl4030_power_configure_resources(struct twl4030_power_data *pdata)
+static int
+twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
{
struct twl4030_resconfig *resconfig = pdata->resource_config;
int err;
@@ -541,7 +544,7 @@ void twl4030_power_off(void)
pr_err("TWL4030 Unable to power off\n");
}
-static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
+static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
struct device_node *node)
{
if (pdata && pdata->use_poweroff)
@@ -553,10 +556,227 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
return false;
}
+#ifdef CONFIG_OF
+
+/* Generic warm reset configuration for omap3 */
+
+static struct twl4030_ins omap3_wrst_seq[] = {
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script omap3_wrst_script = {
+ .script = omap3_wrst_seq,
+ .size = ARRAY_SIZE(omap3_wrst_seq),
+ .flags = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *omap3_reset_scripts[] = {
+ &omap3_wrst_script,
+};
+
+static struct twl4030_resconfig omap3_rconfig[] = {
+ { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1,
+ .type2 = -1 },
+ { .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1,
+ .type2 = -1 },
+ { .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1,
+ .type2 = -1 },
+ { 0, 0},
+};
+
+static struct twl4030_power_data omap3_reset = {
+ .scripts = omap3_reset_scripts,
+ .num = ARRAY_SIZE(omap3_reset_scripts),
+ .resource_config = omap3_rconfig,
+};
+
+/* Configuration for Nokia N900 */
+
+static struct twl4030_ins n900_sleep_on_seq[] = {
+/*
+ * Turn off everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
+};
+
+static struct twl4030_script n900_sleep_on_script = {
+ .script = n900_sleep_on_seq,
+ .size = ARRAY_SIZE(n900_sleep_on_seq),
+ .flags = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins n900_wakeup_seq[] = {
+/*
+ * Reenable everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wakeup_script = {
+ .script = n900_wakeup_seq,
+ .size = ARRAY_SIZE(n900_wakeup_seq),
+ .flags = TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins n900_wakeup_p3_seq[] = {
+/*
+ * Reenable everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wakeup_p3_script = {
+ .script = n900_wakeup_p3_seq,
+ .size = ARRAY_SIZE(n900_wakeup_p3_seq),
+ .flags = TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins n900_wrst_seq[] = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+ 0x13},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+ {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wrst_script = {
+ .script = n900_wrst_seq,
+ .size = ARRAY_SIZE(n900_wrst_seq),
+ .flags = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_n900_scripts[] = {
+ /* wakeup12 script should be loaded before sleep script, otherwise a
+ board might hit retention before loading of wakeup script is
+ completed. This can cause boot failures depending on timing issues.
+ */
+ &n900_wakeup_script,
+ &n900_sleep_on_script,
+ &n900_wakeup_p3_script,
+ &n900_wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_n900_rconfig[] = {
+ { .resource = RES_VDD1, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VDD2, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VPLL1, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VPLL2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX1, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX3, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX4, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VMMC1, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VMMC2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VDAC, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VSIM, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VIO, .devgroup = DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_32KCLKOUT, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_RESET, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_MAIN_REF, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { 0, 0},
+};
+
+static struct twl4030_power_data twl4030_n900 = {
+ .scripts = twl4030_n900_scripts,
+ .num = ARRAY_SIZE(twl4030_n900_scripts),
+ .resource_config = twl4030_n900_rconfig,
+};
+
+static struct of_device_id twl4030_power_of_match[] = {
+ {
+ .compatible = "ti,twl4030-power-n900",
+ .data = &twl4030_n900,
+ },
+ {
+ .compatible = "ti,twl4030-power",
+ .data = &omap3_reset,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
+#endif /* CONFIG_OF */
+
static int twl4030_power_probe(struct platform_device *pdev)
{
- struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
+ const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *match;
int err = 0;
int err2 = 0;
u8 val;
@@ -577,8 +797,12 @@ static int twl4030_power_probe(struct platform_device *pdev)
return err;
}
+ match = of_match_device(of_match_ptr(twl4030_power_of_match),
+ &pdev->dev);
+ if (match && match->data)
+ pdata = match->data;
+
if (pdata) {
- /* TODO: convert to device tree */
err = twl4030_power_configure_scripts(pdata);
if (err) {
pr_err("TWL4030 failed to load scripts\n");
@@ -628,14 +852,6 @@ static int twl4030_power_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_power_of_match[] = {
- {.compatible = "ti,twl4030-power", },
- { },
-};
-MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
-#endif
-
static struct platform_driver twl4030_power_driver = {
.driver = {
.name = "twl4030_power",
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default
Date: Thu, 10 Apr 2014 17:23:59 -0700 [thread overview]
Message-ID: <20140411002358.GA15737@atomide.com> (raw)
In-Reply-To: <1397173639-29587-8-git-send-email-tony@atomide.com>
* Tony Lindgren <tony@atomide.com> [140410 16:52]:
> On N900 there are nice LEDs that show the state of the
> sys_clkreq and sys_off_mode pins.
Here's a work in progress related twl4030 script for N900
to play with, I think it can be made more generic though.
This scales vdd_core to zero during off idle for me with
this series.
Regards,
Tony
8< ----------------------------
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index 8e15ec3..35b2b5f 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -5,7 +5,9 @@ to control the power resources, including power scripts. For now, the
binding only supports the complete shutdown of the system after poweroff.
Required properties:
-- compatible : must be "ti,twl4030-power"
+- compatible : Needs to be one of the following
+ "ti,twl4030-power-n900"
+ "ti,twl4030-power"
Optional properties:
- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c5db0af..3ac2b2d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -269,6 +269,11 @@
compatible = "ti,twl4030-audio";
ti,enable-vibra = <1>;
};
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-n900";
+ ti,use_poweroff;
+ };
};
&twl_gpio {
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 96162b6..d6b05eb 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -29,6 +29,7 @@
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/mach-types.h>
@@ -493,7 +494,8 @@ int twl4030_remove_script(u8 flags)
return err;
}
-static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
+static int
+twl4030_power_configure_scripts(const struct twl4030_power_data *pdata)
{
int err;
int i;
@@ -509,7 +511,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata)
return 0;
}
-static int twl4030_power_configure_resources(struct twl4030_power_data *pdata)
+static int
+twl4030_power_configure_resources(const struct twl4030_power_data *pdata)
{
struct twl4030_resconfig *resconfig = pdata->resource_config;
int err;
@@ -541,7 +544,7 @@ void twl4030_power_off(void)
pr_err("TWL4030 Unable to power off\n");
}
-static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
+static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
struct device_node *node)
{
if (pdata && pdata->use_poweroff)
@@ -553,10 +556,227 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata,
return false;
}
+#ifdef CONFIG_OF
+
+/* Generic warm reset configuration for omap3 */
+
+static struct twl4030_ins omap3_wrst_seq[] = {
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2},
+ {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60},
+ {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script omap3_wrst_script = {
+ .script = omap3_wrst_seq,
+ .size = ARRAY_SIZE(omap3_wrst_seq),
+ .flags = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *omap3_reset_scripts[] = {
+ &omap3_wrst_script,
+};
+
+static struct twl4030_resconfig omap3_rconfig[] = {
+ { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, .type = -1,
+ .type2 = -1 },
+ { .resource = RES_VDD1, .devgroup = DEV_GRP_P1, .type = -1,
+ .type2 = -1 },
+ { .resource = RES_VDD2, .devgroup = DEV_GRP_P1, .type = -1,
+ .type2 = -1 },
+ { 0, 0},
+};
+
+static struct twl4030_power_data omap3_reset = {
+ .scripts = omap3_reset_scripts,
+ .num = ARRAY_SIZE(omap3_reset_scripts),
+ .resource_config = omap3_rconfig,
+};
+
+/* Configuration for Nokia N900 */
+
+static struct twl4030_ins n900_sleep_on_seq[] = {
+/*
+ * Turn off everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
+};
+
+static struct twl4030_script n900_sleep_on_script = {
+ .script = n900_sleep_on_seq,
+ .size = ARRAY_SIZE(n900_sleep_on_seq),
+ .flags = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins n900_wakeup_seq[] = {
+/*
+ * Reenable everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wakeup_script = {
+ .script = n900_wakeup_seq,
+ .size = ARRAY_SIZE(n900_wakeup_seq),
+ .flags = TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins n900_wakeup_p3_seq[] = {
+/*
+ * Reenable everything
+ */
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wakeup_p3_script = {
+ .script = n900_wakeup_p3_seq,
+ .size = ARRAY_SIZE(n900_wakeup_p3_seq),
+ .flags = TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins n900_wrst_seq[] = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+ 0x13},
+ {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+ {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+ {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script n900_wrst_script = {
+ .script = n900_wrst_seq,
+ .size = ARRAY_SIZE(n900_wrst_seq),
+ .flags = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_n900_scripts[] = {
+ /* wakeup12 script should be loaded before sleep script, otherwise a
+ board might hit retention before loading of wakeup script is
+ completed. This can cause boot failures depending on timing issues.
+ */
+ &n900_wakeup_script,
+ &n900_sleep_on_script,
+ &n900_wakeup_p3_script,
+ &n900_wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_n900_rconfig[] = {
+ { .resource = RES_VDD1, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VDD2, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VPLL1, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+ .remap_sleep = RES_STATE_OFF
+ },
+ { .resource = RES_VPLL2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX1, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX3, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VAUX4, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VMMC1, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VMMC2, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VDAC, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VSIM, .devgroup = -1,
+ .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_VIO, .devgroup = DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_32KCLKOUT, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_RESET, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { .resource = RES_MAIN_REF, .devgroup = -1,
+ .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+ },
+ { 0, 0},
+};
+
+static struct twl4030_power_data twl4030_n900 = {
+ .scripts = twl4030_n900_scripts,
+ .num = ARRAY_SIZE(twl4030_n900_scripts),
+ .resource_config = twl4030_n900_rconfig,
+};
+
+static struct of_device_id twl4030_power_of_match[] = {
+ {
+ .compatible = "ti,twl4030-power-n900",
+ .data = &twl4030_n900,
+ },
+ {
+ .compatible = "ti,twl4030-power",
+ .data = &omap3_reset,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
+#endif /* CONFIG_OF */
+
static int twl4030_power_probe(struct platform_device *pdev)
{
- struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
+ const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *match;
int err = 0;
int err2 = 0;
u8 val;
@@ -577,8 +797,12 @@ static int twl4030_power_probe(struct platform_device *pdev)
return err;
}
+ match = of_match_device(of_match_ptr(twl4030_power_of_match),
+ &pdev->dev);
+ if (match && match->data)
+ pdata = match->data;
+
if (pdata) {
- /* TODO: convert to device tree */
err = twl4030_power_configure_scripts(pdata);
if (err) {
pr_err("TWL4030 failed to load scripts\n");
@@ -628,14 +852,6 @@ static int twl4030_power_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_power_of_match[] = {
- {.compatible = "ti,twl4030-power", },
- { },
-};
-MODULE_DEVICE_TABLE(of, twl4030_power_of_match);
-#endif
-
static struct platform_driver twl4030_power_driver = {
.driver = {
.name = "twl4030_power",
next prev parent reply other threads:[~2014-04-11 0:24 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-10 23:47 [PATCH 00/11] Fixes for omap PM for making omap3 DT only Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 01/11] ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 02/11] ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-12 8:57 ` Tero Kristo
2014-04-12 8:57 ` Tero Kristo
2014-04-12 15:02 ` Tony Lindgren
2014-04-12 15:02 ` Tony Lindgren
2014-04-23 7:51 ` Tero Kristo
2014-04-23 7:51 ` Tero Kristo
2014-04-23 20:49 ` Tony Lindgren
2014-04-23 20:49 ` Tony Lindgren
2014-05-07 16:34 ` Tony Lindgren
2014-05-07 16:34 ` Tony Lindgren
2014-04-14 22:51 ` Grazvydas Ignotas
2014-04-14 22:51 ` Grazvydas Ignotas
2014-04-15 22:56 ` Tony Lindgren
2014-04-15 22:56 ` Tony Lindgren
2014-04-16 13:58 ` Grazvydas Ignotas
2014-04-16 13:58 ` Grazvydas Ignotas
2014-04-18 17:48 ` Tony Lindgren
2014-04-18 17:48 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 03/11] ARM: OMAP3: Disable broken omap3_set_off_timings function Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 04/11] ARM: OMAP3: Fix voltage control for deeper idle states Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-11 15:14 ` Tony Lindgren
2014-04-11 15:14 ` Tony Lindgren
2014-05-07 16:38 ` Tony Lindgren
2014-05-07 16:38 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 05/11] ARM: dts: Configure omap3 twl4030 I2C4 pins by default Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 06/11] ARM: OMAP2+: Fix voltage scaling init for device tree Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-05-19 17:50 ` Joachim Eastwood
2014-05-19 17:50 ` Joachim Eastwood
2014-05-19 18:01 ` Tony Lindgren
2014-05-19 18:01 ` Tony Lindgren
2014-05-19 18:32 ` Nishanth Menon
2014-05-19 18:32 ` Nishanth Menon
2014-05-19 18:48 ` Joachim Eastwood
2014-05-19 18:48 ` Joachim Eastwood
2014-05-19 18:52 ` Nishanth Menon
2014-05-19 18:52 ` Nishanth Menon
2014-05-19 20:23 ` Tony Lindgren
2014-05-19 20:23 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 07/11] ARM: dts: Enable N900 keybaord sleep leds by default Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-11 0:23 ` Tony Lindgren [this message]
2014-04-11 0:23 ` Tony Lindgren
2014-04-11 23:31 ` Aaro Koskinen
2014-04-11 23:31 ` Aaro Koskinen
2014-04-23 21:07 ` Tony Lindgren
2014-04-23 21:07 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 08/11] ARM: dts: Fix omap serial wake-up when booted with device tree Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 09/11] ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 10/11] mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-17 8:00 ` Lee Jones
2014-04-17 8:00 ` Lee Jones
2014-04-17 15:37 ` Tony Lindgren
2014-04-17 15:37 ` Tony Lindgren
2014-04-23 14:46 ` [GIT PULL] arm: omap: Immutable branch between MFD and ARM OMAP due for the v3.16 merge-window Lee Jones
2014-04-23 14:46 ` Lee Jones
2014-04-23 20:41 ` Tony Lindgren
2014-04-23 20:41 ` Tony Lindgren
2014-04-10 23:47 ` [PATCH 11/11] pinctrl: single: Clear pin interrupts enabled by bootloader Tony Lindgren
2014-04-10 23:47 ` Tony Lindgren
2014-04-22 11:54 ` Linus Walleij
2014-04-22 11:54 ` Linus Walleij
2014-04-22 16:10 ` Tony Lindgren
2014-04-22 16:10 ` Tony Lindgren
2014-04-23 13:57 ` Linus Walleij
2014-04-23 13:57 ` Linus Walleij
2014-04-11 20:47 ` [PATCH 00/11] Fixes for omap PM for making omap3 DT only Sebastian Reichel
2014-04-11 20:47 ` Sebastian Reichel
2014-04-11 21:04 ` Tony Lindgren
2014-04-11 21:04 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140411002358.GA15737@atomide.com \
--to=tony@atomide.com \
--cc=aaro.koskinen@iki.fi \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=pali.rohar@gmail.com \
--cc=paul@pwsan.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.