From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi
Date: Wed, 30 Apr 2014 01:51:34 +0000 [thread overview]
Message-ID: <20140430015134.GH24989@verge.net.au> (raw)
In-Reply-To: <2171203.7Ft1Jpoq1o@avalon>
On Wed, Apr 30, 2014 at 02:42:20AM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> Thank you for the patch.
>
> On Tuesday 29 April 2014 16:43:23 Simon Horman wrote:
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> > arch/arm/boot/dts/r8a7779.dtsi | 60 +++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 60 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index e924f96..3e9cca4 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -203,6 +203,66 @@
> > status = "disabled";
> > };
> >
> > + scif0: serial@ffe40000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
>
> The most specific compatible string should come first, so this should read
>
> compatible = "renesas,scif-r8a7779", "renesas,scif";
Thanks.
>
> > + reg = <0xffe40000 265>;
>
> 265 ? Don't you mean 256 ? 0x100 might be a better option.
Thanks.
>
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
>
> Could you try the SCI RFC patch set I've just sent that drop the interface
> clock in favour of the functional clock ?
Yes, I will test this patch against your SCI patch.
> > + status = "disabled";
> > + };
> > +
> > + scif1: serial@ffe41000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe41000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif2: serial@ffe42000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe42000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif3: serial@ffe43000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe43000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif4: serial@ffe44000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe44000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif5: serial@ffe45000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe45000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > pfc: pfc@fffc0000 {
> > compatible = "renesas,pfc-r8a7779";
> > reg = <0xfffc0000 0x23c>;
>
> --
> Regards,
>
> Laurent Pinchart
>
WARNING: multiple messages have this Message-ID (diff)
From: horms@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi
Date: Wed, 30 Apr 2014 10:51:34 +0900 [thread overview]
Message-ID: <20140430015134.GH24989@verge.net.au> (raw)
In-Reply-To: <2171203.7Ft1Jpoq1o@avalon>
On Wed, Apr 30, 2014 at 02:42:20AM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> Thank you for the patch.
>
> On Tuesday 29 April 2014 16:43:23 Simon Horman wrote:
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> > arch/arm/boot/dts/r8a7779.dtsi | 60 +++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 60 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> > index e924f96..3e9cca4 100644
> > --- a/arch/arm/boot/dts/r8a7779.dtsi
> > +++ b/arch/arm/boot/dts/r8a7779.dtsi
> > @@ -203,6 +203,66 @@
> > status = "disabled";
> > };
> >
> > + scif0: serial at ffe40000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
>
> The most specific compatible string should come first, so this should read
>
> compatible = "renesas,scif-r8a7779", "renesas,scif";
Thanks.
>
> > + reg = <0xffe40000 265>;
>
> 265 ? Don't you mean 256 ? 0x100 might be a better option.
Thanks.
>
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
>
> Could you try the SCI RFC patch set I've just sent that drop the interface
> clock in favour of the functional clock ?
Yes, I will test this patch against your SCI patch.
> > + status = "disabled";
> > + };
> > +
> > + scif1: serial at ffe41000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe41000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif2: serial at ffe42000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe42000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif3: serial at ffe43000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe43000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif4: serial at ffe44000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe44000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > + scif5: serial at ffe45000 {
> > + compatible = "renesas,scif", "renesas,scif-r8a7779";
> > + reg = <0xffe45000 265>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg_clocks R8A7779_CLK_P>;
> > + clock-names = "sci_ick";
> > + status = "disabled";
> > + };
> > +
> > pfc: pfc at fffc0000 {
> > compatible = "renesas,pfc-r8a7779";
> > reg = <0xfffc0000 0x23c>;
>
> --
> Regards,
>
> Laurent Pinchart
>
next prev parent reply other threads:[~2014-04-30 1:51 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 7:43 [PATCH/RFC 0/4] ARM: shmobile: marzen: Initialise SCIF devices using DT Simon Horman
2014-04-29 7:43 ` Simon Horman
2014-04-29 7:43 ` [PATCH 1/4] ARM: shmobile: r8a7779: Add scif nodes to dtsi Simon Horman
2014-04-29 7:43 ` Simon Horman
2014-04-30 0:42 ` Laurent Pinchart
2014-04-30 0:42 ` Laurent Pinchart
2014-04-30 1:51 ` Simon Horman [this message]
2014-04-30 1:51 ` Simon Horman
2014-04-29 7:43 ` [PATCH 2/4] ARM: shmobile: marzen: Remove early_printk from command line Simon Horman
2014-04-29 7:43 ` Simon Horman
2014-04-30 0:45 ` Laurent Pinchart
2014-04-30 0:45 ` Laurent Pinchart
2014-04-29 7:43 ` [PATCH 3/4] ARM: shmobile: marzen: Initialise SCIF devices using DT Simon Horman
2014-04-29 7:43 ` Simon Horman
2014-04-30 0:45 ` Laurent Pinchart
2014-04-30 0:45 ` Laurent Pinchart
2014-04-29 7:43 ` [PATCH 4/4] ARM: shmobile: marzen: Use disabled variant of clock workaround for scif devices Simon Horman
2014-04-29 7:43 ` Simon Horman
2014-04-29 13:40 ` Magnus Damm
2014-04-29 13:40 ` Magnus Damm
2014-04-29 23:51 ` Simon Horman
2014-04-29 23:51 ` Simon Horman
2014-04-30 0:47 ` Laurent Pinchart
2014-04-30 0:47 ` Laurent Pinchart
2014-04-30 1:50 ` Simon Horman
2014-04-30 1:50 ` Simon Horman
2014-04-30 4:49 ` Magnus Damm
2014-04-30 4:49 ` Magnus Damm
2014-04-30 5:31 ` Simon Horman
2014-04-30 5:31 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140430015134.GH24989@verge.net.au \
--to=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.