[PATCH v2 1/2] Documentation: add Device tree bindings for Hisilicon hix5hd2 ethernet

[mark.rutland@arm.com (Mark Rutland)]

On Tue, May 27, 2014 at 01:44:26PM +0100, Zhangfei Gao wrote:
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
>  .../bindings/net/hisilicon-hix5hd2-gmac.txt        |   36 ++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> new file mode 100644
> index 0000000..5fe3835
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
> @@ -0,0 +1,36 @@
> +Hisilicon hix5hd2 gmac controller

Just to clarify, is the SoC name "hix5hd2", or is the 'x' a wildcard?

> +
> +Required properties:
> +- compatible: should be "hisilicon,hix5hd2-gmac".
> +- reg: specifies base physical address(s) and size of the device registers.
> +  The first region is the MAC register base and size.
> +  The second region is external interface control register.

Single registers? Are these not part of a larger block?

> +- interrupts: should contain the MAC interrupts

How many, in which order?

> +- #address-cells: must be <1>.
> +- #size-cells: must be <0>.
> +- phy-mode: see ethernet.txt [1].
> +- phy-handle: see ethernet.txt [1].
> +- mac-address: see ethernet.txt [1].
> +- clocks: clock phandle and specifier pair.

Is this the only clock input to the gmac block?

Is the clock input named in any documentation?

Cheers,
Mark.

> +
> +- PHY subnode: inherits from phy binding [2]
> +
> +[1] Documentation/devicetree/bindings/net/ethernet.txt
> +[2] Documentation/devicetree/bindings/net/phy.txt
> +
> +Example:
> +	gmac0: ethernet at f9840000 {
> +		compatible = "hisilicon,hix5hd2-gmac";
> +		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
> +		interrupts = <0 71 4>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		phy-mode = "mii";
> +		phy-handle = <&phy2>;
> +		mac-address = [00 00 00 00 00 00];
> +		clocks = <&clock HIX5HD2_MAC0_CLK>;
> +
> +		phy2: ethernet-phy at 2 {
> +			reg = <2>;
> +		};
> +	};
> -- 
> 1.7.9.5
> 
>