From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 5/5] arm64: Add atomic pool for non-coherent and CMA allocations.
Date: Fri, 4 Jul 2014 15:35:22 +0200 [thread overview]
Message-ID: <20140704133517.GA9860@ulmo> (raw)
In-Reply-To: <1404324218-4743-6-git-send-email-lauraa@codeaurora.org>
On Wed, Jul 02, 2014 at 11:03:38AM -0700, Laura Abbott wrote:
[...]
> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
[...]
> +static struct gen_pool *atomic_pool;
> +
> +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K
> +static size_t atomic_pool_size = DEFAULT_DMA_COHERENT_POOL_SIZE;
There doesn't seem to be much use for this since it can't be overridden
via init_dma_coherent_pool_size like on ARM.
> +static int __free_from_pool(void *start, size_t size)
> +{
> + if (!__in_atomic_pool(start, size))
> + return 0;
> +
> + gen_pool_free(atomic_pool, (unsigned long)start, size);
> +
> + return 1;
> +}
> +
> +
There's a gratuituous blank line here.
> static void *__dma_alloc_coherent(struct device *dev, size_t size,
> dma_addr_t *dma_handle, gfp_t flags,
> struct dma_attrs *attrs)
> @@ -53,7 +103,8 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
> if (IS_ENABLED(CONFIG_ZONE_DMA) &&
> dev->coherent_dma_mask <= DMA_BIT_MASK(32))
> flags |= GFP_DMA;
> - if (IS_ENABLED(CONFIG_DMA_CMA)) {
> +
> + if (!(flags & __GFP_WAIT) && IS_ENABLED(CONFIG_DMA_CMA)) {
I think the diff would be more readable here if this wasn't introducing
a blank linke and kept the IS_ENABLED() first.
> struct page *page;
>
> size = PAGE_ALIGN(size);
> @@ -73,50 +124,56 @@ static void __dma_free_coherent(struct device *dev, size_t size,
> void *vaddr, dma_addr_t dma_handle,
> struct dma_attrs *attrs)
> {
> + bool freed;
> + phys_addr_t paddr = dma_to_phys(dev, dma_handle);
> +
> if (dev == NULL) {
> WARN_ONCE(1, "Use an actual device structure for DMA allocation\n");
> return;
> }
>
> - if (IS_ENABLED(CONFIG_DMA_CMA)) {
> - phys_addr_t paddr = dma_to_phys(dev, dma_handle);
>
> - dma_release_from_contiguous(dev,
The above leaves an unnecessary blank line in place.
> ptr = __dma_alloc_coherent(dev, size, dma_handle, flags, attrs);
> if (!ptr)
> goto no_mem;
> - map = kmalloc(sizeof(struct page *) << order, flags & ~GFP_DMA);
> - if (!map)
> - goto no_map;
>
> /* remove any dirty cache lines on the kernel alias */
> __dma_flush_range(ptr, ptr + size);
>
> +
Adds an unnecessary blank line.
> @@ -332,6 +391,67 @@ static struct notifier_block amba_bus_nb = {
>
> extern int swiotlb_late_init_with_default_size(size_t default_size);
>
> +static int __init atomic_pool_init(void)
> +{
> + pgprot_t prot = __pgprot(PROT_NORMAL_NC);
> + unsigned long nr_pages = atomic_pool_size >> PAGE_SHIFT;
> + struct page *page;
> + void *addr;
> +
> +
There's another gratuituous blank line here...
> + if (dev_get_cma_area(NULL))
> + page = dma_alloc_from_contiguous(NULL, nr_pages,
> + get_order(atomic_pool_size));
> + else
> + page = alloc_pages(GFP_KERNEL, get_order(atomic_pool_size));
> +
> +
and here.
> + if (page) {
> + int ret;
> +
> + atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
> + if (!atomic_pool)
> + goto free_page;
> +
> + addr = dma_common_contiguous_remap(page, atomic_pool_size,
> + VM_USERMAP, prot, atomic_pool_init);
> +
> + if (!addr)
> + goto destroy_genpool;
> +
> + memset(addr, 0, atomic_pool_size);
> + __dma_flush_range(addr, addr + atomic_pool_size);
> +
> + ret = gen_pool_add_virt(atomic_pool, (unsigned long)addr,
> + page_to_phys(page),
> + atomic_pool_size, -1);
> + if (ret)
> + goto remove_mapping;
> +
> + gen_pool_set_algo(atomic_pool,
> + gen_pool_first_fit_order_align, NULL);
> +
> + pr_info("DMA: preallocated %zd KiB pool for atomic allocations\n",
I think this should be "%zu" because atomic_pool_size is a size_t, not a
ssize_t.
> + atomic_pool_size / 1024);
> + return 0;
> + }
> + goto out;
> +
> +remove_mapping:
> + dma_common_free_remap(addr, atomic_pool_size, VM_USERMAP);
> +destroy_genpool:
> + gen_pool_destroy(atomic_pool);
> + atomic_pool == NULL;
This probably doesn't belong here.
> +free_page:
> + if (!dma_release_from_contiguous(NULL, page, nr_pages))
> + __free_pages(page, get_order(atomic_pool_size));
You use get_order(atomic_pool_size) a lot, perhaps it should be a
temporary variable?
> +out:
> + pr_err("DMA: failed to allocate %zx KiB pool for atomic coherent allocation\n",
> + atomic_pool_size / 1024);
Print in decimal rather than hexadecimal?
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140704/1e719c0a/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: Laura Abbott <lauraa@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
David Riley <davidriley@chromium.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Ritesh Harjain <ritesh.harjani@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv4 5/5] arm64: Add atomic pool for non-coherent and CMA allocations.
Date: Fri, 4 Jul 2014 15:35:22 +0200 [thread overview]
Message-ID: <20140704133517.GA9860@ulmo> (raw)
In-Reply-To: <1404324218-4743-6-git-send-email-lauraa@codeaurora.org>
[-- Attachment #1: Type: text/plain, Size: 4461 bytes --]
On Wed, Jul 02, 2014 at 11:03:38AM -0700, Laura Abbott wrote:
[...]
> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
[...]
> +static struct gen_pool *atomic_pool;
> +
> +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K
> +static size_t atomic_pool_size = DEFAULT_DMA_COHERENT_POOL_SIZE;
There doesn't seem to be much use for this since it can't be overridden
via init_dma_coherent_pool_size like on ARM.
> +static int __free_from_pool(void *start, size_t size)
> +{
> + if (!__in_atomic_pool(start, size))
> + return 0;
> +
> + gen_pool_free(atomic_pool, (unsigned long)start, size);
> +
> + return 1;
> +}
> +
> +
There's a gratuituous blank line here.
> static void *__dma_alloc_coherent(struct device *dev, size_t size,
> dma_addr_t *dma_handle, gfp_t flags,
> struct dma_attrs *attrs)
> @@ -53,7 +103,8 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
> if (IS_ENABLED(CONFIG_ZONE_DMA) &&
> dev->coherent_dma_mask <= DMA_BIT_MASK(32))
> flags |= GFP_DMA;
> - if (IS_ENABLED(CONFIG_DMA_CMA)) {
> +
> + if (!(flags & __GFP_WAIT) && IS_ENABLED(CONFIG_DMA_CMA)) {
I think the diff would be more readable here if this wasn't introducing
a blank linke and kept the IS_ENABLED() first.
> struct page *page;
>
> size = PAGE_ALIGN(size);
> @@ -73,50 +124,56 @@ static void __dma_free_coherent(struct device *dev, size_t size,
> void *vaddr, dma_addr_t dma_handle,
> struct dma_attrs *attrs)
> {
> + bool freed;
> + phys_addr_t paddr = dma_to_phys(dev, dma_handle);
> +
> if (dev == NULL) {
> WARN_ONCE(1, "Use an actual device structure for DMA allocation\n");
> return;
> }
>
> - if (IS_ENABLED(CONFIG_DMA_CMA)) {
> - phys_addr_t paddr = dma_to_phys(dev, dma_handle);
>
> - dma_release_from_contiguous(dev,
The above leaves an unnecessary blank line in place.
> ptr = __dma_alloc_coherent(dev, size, dma_handle, flags, attrs);
> if (!ptr)
> goto no_mem;
> - map = kmalloc(sizeof(struct page *) << order, flags & ~GFP_DMA);
> - if (!map)
> - goto no_map;
>
> /* remove any dirty cache lines on the kernel alias */
> __dma_flush_range(ptr, ptr + size);
>
> +
Adds an unnecessary blank line.
> @@ -332,6 +391,67 @@ static struct notifier_block amba_bus_nb = {
>
> extern int swiotlb_late_init_with_default_size(size_t default_size);
>
> +static int __init atomic_pool_init(void)
> +{
> + pgprot_t prot = __pgprot(PROT_NORMAL_NC);
> + unsigned long nr_pages = atomic_pool_size >> PAGE_SHIFT;
> + struct page *page;
> + void *addr;
> +
> +
There's another gratuituous blank line here...
> + if (dev_get_cma_area(NULL))
> + page = dma_alloc_from_contiguous(NULL, nr_pages,
> + get_order(atomic_pool_size));
> + else
> + page = alloc_pages(GFP_KERNEL, get_order(atomic_pool_size));
> +
> +
and here.
> + if (page) {
> + int ret;
> +
> + atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
> + if (!atomic_pool)
> + goto free_page;
> +
> + addr = dma_common_contiguous_remap(page, atomic_pool_size,
> + VM_USERMAP, prot, atomic_pool_init);
> +
> + if (!addr)
> + goto destroy_genpool;
> +
> + memset(addr, 0, atomic_pool_size);
> + __dma_flush_range(addr, addr + atomic_pool_size);
> +
> + ret = gen_pool_add_virt(atomic_pool, (unsigned long)addr,
> + page_to_phys(page),
> + atomic_pool_size, -1);
> + if (ret)
> + goto remove_mapping;
> +
> + gen_pool_set_algo(atomic_pool,
> + gen_pool_first_fit_order_align, NULL);
> +
> + pr_info("DMA: preallocated %zd KiB pool for atomic allocations\n",
I think this should be "%zu" because atomic_pool_size is a size_t, not a
ssize_t.
> + atomic_pool_size / 1024);
> + return 0;
> + }
> + goto out;
> +
> +remove_mapping:
> + dma_common_free_remap(addr, atomic_pool_size, VM_USERMAP);
> +destroy_genpool:
> + gen_pool_destroy(atomic_pool);
> + atomic_pool == NULL;
This probably doesn't belong here.
> +free_page:
> + if (!dma_release_from_contiguous(NULL, page, nr_pages))
> + __free_pages(page, get_order(atomic_pool_size));
You use get_order(atomic_pool_size) a lot, perhaps it should be a
temporary variable?
> +out:
> + pr_err("DMA: failed to allocate %zx KiB pool for atomic coherent allocation\n",
> + atomic_pool_size / 1024);
Print in decimal rather than hexadecimal?
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-07-04 13:35 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-02 18:03 [PATCHv4 0/5] DMA Atomic pool for arm64 Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` [PATCHv4 1/5] lib/genalloc.c: Add power aligned algorithm Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-03 18:10 ` Will Deacon
2014-07-03 18:10 ` Will Deacon
2014-07-03 18:10 ` Will Deacon
2014-07-09 22:35 ` Olof Johansson
2014-07-09 22:35 ` Olof Johansson
2014-07-09 22:35 ` Olof Johansson
2014-07-02 18:03 ` [PATCHv4 2/5] lib/genalloc.c: Add genpool range check function Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-03 18:14 ` Will Deacon
2014-07-03 18:14 ` Will Deacon
2014-07-03 18:14 ` Will Deacon
2014-07-09 22:33 ` Olof Johansson
2014-07-09 22:33 ` Olof Johansson
2014-07-09 22:33 ` Olof Johansson
2014-07-21 19:51 ` Laura Abbott
2014-07-21 19:51 ` Laura Abbott
2014-07-21 19:51 ` Laura Abbott
2014-07-22 15:50 ` Catalin Marinas
2014-07-22 15:50 ` Catalin Marinas
2014-07-22 15:50 ` Catalin Marinas
2014-07-02 18:03 ` [PATCHv4 3/5] common: dma-mapping: Introduce common remapping functions Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-09 22:46 ` Olof Johansson
2014-07-09 22:46 ` Olof Johansson
2014-07-09 22:46 ` Olof Johansson
2014-07-18 14:13 ` Catalin Marinas
2014-07-18 14:13 ` Catalin Marinas
2014-07-18 14:13 ` Catalin Marinas
2014-07-18 13:53 ` Catalin Marinas
2014-07-18 13:53 ` Catalin Marinas
2014-07-18 13:53 ` Catalin Marinas
2014-07-21 19:33 ` Laura Abbott
2014-07-21 19:33 ` Laura Abbott
2014-07-21 19:33 ` Laura Abbott
2014-07-22 16:04 ` Catalin Marinas
2014-07-22 16:04 ` Catalin Marinas
2014-07-22 16:04 ` Catalin Marinas
2014-07-02 18:03 ` [PATCHv4 4/5] arm: use genalloc for the atomic pool Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-04 13:42 ` Thierry Reding
2014-07-04 13:42 ` Thierry Reding
2014-07-21 21:22 ` Laura Abbott
2014-07-21 21:22 ` Laura Abbott
2014-07-21 21:22 ` Laura Abbott
2014-07-02 18:03 ` [PATCHv4 5/5] arm64: Add atomic pool for non-coherent and CMA allocations Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-02 18:03 ` Laura Abbott
2014-07-04 13:35 ` Thierry Reding [this message]
2014-07-04 13:35 ` Thierry Reding
2014-07-21 22:00 ` Laura Abbott
2014-07-21 22:00 ` Laura Abbott
2014-07-21 22:00 ` Laura Abbott
2014-07-18 13:43 ` Catalin Marinas
2014-07-18 13:43 ` Catalin Marinas
2014-07-18 13:43 ` Catalin Marinas
2014-07-21 22:36 ` Laura Abbott
2014-07-21 22:36 ` Laura Abbott
2014-07-21 22:36 ` Laura Abbott
2014-07-22 15:56 ` Catalin Marinas
2014-07-22 15:56 ` Catalin Marinas
2014-07-22 15:56 ` Catalin Marinas
2014-07-22 18:06 ` Arnd Bergmann
2014-07-22 18:06 ` Arnd Bergmann
2014-07-22 18:06 ` Arnd Bergmann
2014-07-22 21:03 ` Catalin Marinas
2014-07-22 21:03 ` Catalin Marinas
2014-07-22 21:03 ` Catalin Marinas
2014-07-22 23:51 ` Laura Abbott
2014-07-22 23:51 ` Laura Abbott
2014-07-22 23:51 ` Laura Abbott
2014-07-23 11:12 ` Arnd Bergmann
2014-07-23 11:12 ` Arnd Bergmann
2014-07-23 11:12 ` Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2014-07-23 1:35 [PATCHv4 0/5] Atomic pool for arm64 Laura Abbott
2014-07-23 1:35 ` [PATCHv4 5/5] arm64: Add atomic pool for non-coherent and CMA allocations Laura Abbott
2014-07-23 1:35 ` Laura Abbott
2014-07-23 1:35 ` Laura Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140704133517.GA9860@ulmo \
--to=thierry.reding@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.