Re: [lm-sensors] [PATCH 2/2] pmbus: ltc2978: add regulator gating

[Guenter Roeck <linux@roeck-us.net>]

On Thu, Aug 21, 2014 at 07:36:50PM -0500, Mark Brown wrote:
> On Thu, Aug 21, 2014 at 05:21:26PM -0500, atull@opensource.altera.com wrote:
> 
> > +config SENSORS_LTC2978_REGULATOR
> > +	boolean "Regulator support for LTC2974, LTC2978, LTC3880, and LTC3883"
> > +	default n
> 
> No need to say default n here, it's the default default.
> 
> > +	depends on SENSORS_LTC2978
> > +	select REGULATOR
> 
> I'd expect a depends here.
> 
> > +#include <linux/regulator/driver.h>
> > +#include <linux/regulator/machine.h>
> 
> If you need machine.h that's suspicious...  why do you need it?
> 
> > +static int ltc2978_write_pmbus_operation(struct regulator_dev *rdev, u8 value)
> > +{
> > +	struct device *dev = rdev_get_dev(rdev);
> > +	struct i2c_client *client = to_i2c_client(dev->parent);
> > +	int ret;
> > +
> > +	ret = pmbus_set_page(client, 0xff);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	return i2c_smbus_write_byte_data(client, PMBUS_OPERATION, value);
> > +}
> 
> This all looks very much like pmbus could use regmap and then the regmap
> helpers.  I'd not insist on it though.  What I would however suggest is

Not unless regmap got extended recently to support quick, byte, and word
smbus accesses at the same time.

Guenter

> that these functions should all be helpers which read the specific
> page, addresses and bits to write from the driver structure - I bet the
> code is going to be identical for most pmbus using regulators and so it
> makes sense to share it like we do with the generic regmap functions.
> 
> That means that any good practice can be deployed more easily and any
> API updates only need to update the helpers.
> 
> > +static struct regulator_init_data ltc2978_regulator_init = {
> > +	.constraints = {
> > +		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
> > +	},
> > +};
> 
> You should not be forcing this on, you don't know what's safe on any
> given board.  Allow the board to specify constraints then it has
> control.



_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors