From: "Kirill A. Shutemov" <kirill@shutemov.name>
To: Peter Feiner <pfeiner@google.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Cyrill Gorcunov <gorcunov@openvz.org>,
Pavel Emelyanov <xemul@parallels.com>,
Jamie Liu <jamieliu@google.com>, Hugh Dickins <hughd@google.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH v2 1/3] mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
Date: Sun, 24 Aug 2014 02:50:58 +0300 [thread overview]
Message-ID: <20140823235058.GA27234@node.dhcp.inet.fi> (raw)
In-Reply-To: <20140823230011.GA26483@node.dhcp.inet.fi>
On Sun, Aug 24, 2014 at 02:00:11AM +0300, Kirill A. Shutemov wrote:
> On Sat, Aug 23, 2014 at 06:11:59PM -0400, Peter Feiner wrote:
> > For VMAs that don't want write notifications, PTEs created for read
> > faults have their write bit set. If the read fault happens after
> > VM_SOFTDIRTY is cleared, then the PTE's softdirty bit will remain
> > clear after subsequent writes.
> >
> > Here's a simple code snippet to demonstrate the bug:
> >
> > char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
> > MAP_ANONYMOUS | MAP_SHARED, -1, 0);
> > system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
> > assert(*m == '\0'); /* new PTE allows write access */
> > assert(!soft_dirty(x));
> > *m = 'x'; /* should dirty the page */
> > assert(soft_dirty(x)); /* fails */
> >
> > With this patch, write notifications are enabled when VM_SOFTDIRTY is
> > cleared. Furthermore, to avoid faults, write notifications are
> > disabled when VM_SOFTDIRTY is reset.
> >
> > Signed-off-by: Peter Feiner <pfeiner@google.com>
One more case to consider: mprotect() which doesn't trigger successful
vma_merge() will not set VM_SOFTDIRTY and will not enable write-protect on
the vma.
It's probably better to take VM_SOFTDIRTY into account in
vma_wants_writenotify() and re-think logic in other corners.
--
Kirill A. Shutemov
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: "Kirill A. Shutemov" <kirill@shutemov.name>
To: Peter Feiner <pfeiner@google.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Cyrill Gorcunov <gorcunov@openvz.org>,
Pavel Emelyanov <xemul@parallels.com>,
Jamie Liu <jamieliu@google.com>, Hugh Dickins <hughd@google.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH v2 1/3] mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
Date: Sun, 24 Aug 2014 02:50:58 +0300 [thread overview]
Message-ID: <20140823235058.GA27234@node.dhcp.inet.fi> (raw)
In-Reply-To: <20140823230011.GA26483@node.dhcp.inet.fi>
On Sun, Aug 24, 2014 at 02:00:11AM +0300, Kirill A. Shutemov wrote:
> On Sat, Aug 23, 2014 at 06:11:59PM -0400, Peter Feiner wrote:
> > For VMAs that don't want write notifications, PTEs created for read
> > faults have their write bit set. If the read fault happens after
> > VM_SOFTDIRTY is cleared, then the PTE's softdirty bit will remain
> > clear after subsequent writes.
> >
> > Here's a simple code snippet to demonstrate the bug:
> >
> > char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
> > MAP_ANONYMOUS | MAP_SHARED, -1, 0);
> > system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
> > assert(*m == '\0'); /* new PTE allows write access */
> > assert(!soft_dirty(x));
> > *m = 'x'; /* should dirty the page */
> > assert(soft_dirty(x)); /* fails */
> >
> > With this patch, write notifications are enabled when VM_SOFTDIRTY is
> > cleared. Furthermore, to avoid faults, write notifications are
> > disabled when VM_SOFTDIRTY is reset.
> >
> > Signed-off-by: Peter Feiner <pfeiner@google.com>
One more case to consider: mprotect() which doesn't trigger successful
vma_merge() will not set VM_SOFTDIRTY and will not enable write-protect on
the vma.
It's probably better to take VM_SOFTDIRTY into account in
vma_wants_writenotify() and re-think logic in other corners.
--
Kirill A. Shutemov
next prev parent reply other threads:[~2014-08-23 23:56 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-20 21:46 [PATCH] mm: softdirty: write protect PTEs created for read faults after VM_SOFTDIRTY cleared Peter Feiner
2014-08-20 21:46 ` Peter Feiner
2014-08-20 23:45 ` Kirill A. Shutemov
2014-08-20 23:45 ` Kirill A. Shutemov
2014-08-21 19:37 ` Peter Feiner
2014-08-21 19:37 ` Peter Feiner
2014-08-21 20:51 ` Cyrill Gorcunov
2014-08-21 20:51 ` Cyrill Gorcunov
2014-08-21 21:39 ` Kirill A. Shutemov
2014-08-21 21:39 ` Kirill A. Shutemov
2014-08-21 21:46 ` Peter Feiner
2014-08-21 21:46 ` Peter Feiner
2014-08-21 21:51 ` Kirill A. Shutemov
2014-08-21 21:51 ` Kirill A. Shutemov
2014-08-21 22:50 ` Peter Feiner
2014-08-21 22:50 ` Peter Feiner
2014-08-22 6:33 ` Cyrill Gorcunov
2014-08-22 6:33 ` Cyrill Gorcunov
2014-08-23 22:11 ` [PATCH v2 0/3] softdirty fix and write notification cleanup Peter Feiner
2014-08-23 22:11 ` Peter Feiner
2014-08-23 22:11 ` [PATCH v2 1/3] mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared Peter Feiner
2014-08-23 22:11 ` Peter Feiner
2014-08-23 23:00 ` Kirill A. Shutemov
2014-08-23 23:00 ` Kirill A. Shutemov
2014-08-23 23:15 ` Peter Feiner
2014-08-23 23:15 ` Peter Feiner
2014-08-23 23:50 ` Kirill A. Shutemov [this message]
2014-08-23 23:50 ` Kirill A. Shutemov
2014-08-24 0:55 ` Peter Feiner
2014-08-24 0:55 ` Peter Feiner
2014-08-23 22:12 ` [PATCH v2 2/3] mm: mprotect: preserve special page protection bits Peter Feiner
2014-08-23 22:12 ` Peter Feiner
2014-08-23 22:12 ` [PATCH v2 3/3] mm: mmap: cleanup code that preserves special vm_page_prot bits Peter Feiner
2014-08-23 22:12 ` Peter Feiner
2014-08-24 1:43 ` [PATCH v3] mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared Peter Feiner
2014-08-24 1:43 ` Peter Feiner
2014-08-24 7:59 ` Kirill A. Shutemov
2014-08-24 7:59 ` Kirill A. Shutemov
2014-08-24 19:22 ` Cyrill Gorcunov
2014-08-24 19:22 ` Cyrill Gorcunov
2014-08-24 14:41 ` [PATCH v4] " Peter Feiner
2014-08-24 14:41 ` Peter Feiner
2014-08-25 3:34 ` [PATCH v5] " Peter Feiner
2014-08-25 3:34 ` Peter Feiner
2014-08-26 4:45 ` Hugh Dickins
2014-08-26 4:45 ` Hugh Dickins
2014-08-26 6:49 ` Cyrill Gorcunov
2014-08-26 6:49 ` Cyrill Gorcunov
2014-08-26 14:04 ` Kirill A. Shutemov
2014-08-26 14:04 ` Kirill A. Shutemov
2014-08-26 14:19 ` Cyrill Gorcunov
2014-08-26 14:19 ` Cyrill Gorcunov
2014-08-26 14:56 ` Kirill A. Shutemov
2014-08-26 14:56 ` Kirill A. Shutemov
2014-08-26 15:18 ` Cyrill Gorcunov
2014-08-26 15:18 ` Cyrill Gorcunov
2014-08-26 15:43 ` Kirill A. Shutemov
2014-08-26 15:43 ` Kirill A. Shutemov
2014-08-26 15:53 ` Cyrill Gorcunov
2014-08-26 15:53 ` Cyrill Gorcunov
2014-08-27 23:12 ` Hugh Dickins
2014-08-27 23:12 ` Hugh Dickins
2014-08-28 6:31 ` Cyrill Gorcunov
2014-08-28 6:31 ` Cyrill Gorcunov
2014-08-27 21:55 ` Hugh Dickins
2014-08-27 21:55 ` Hugh Dickins
2014-09-04 16:43 ` Peter Feiner
2014-09-04 16:43 ` Peter Feiner
2014-09-07 21:31 ` Peter Feiner
2014-09-07 21:31 ` Peter Feiner
2014-09-07 23:01 ` [PATCH v6] " Peter Feiner
2014-09-07 23:01 ` Peter Feiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140823235058.GA27234@node.dhcp.inet.fi \
--to=kirill@shutemov.name \
--cc=akpm@linux-foundation.org \
--cc=gorcunov@openvz.org \
--cc=hughd@google.com \
--cc=jamieliu@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=pfeiner@google.com \
--cc=xemul@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.