From: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
To: Ouyang Changchun
<changchun.ouyang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: dev-VfR2kkLFssw@public.gmane.org
Subject: [RFC 06/10] virtio: use software vlan stripping
Date: Mon, 25 Aug 2014 19:07:52 -0700 [thread overview]
Message-ID: <20140826020848.386074683@networkplumber.org> (raw)
In-Reply-To: 20140826020746.062748014@networkplumber.org
[-- Attachment #1: virtio-vlan-tag.patch --]
[-- Type: text/plain, Size: 2916 bytes --]
Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
---
lib/librte_pmd_virtio/virtio_ethdev.c | 2 ++
lib/librte_pmd_virtio/virtio_pci.h | 1 +
lib/librte_pmd_virtio/virtio_rxtx.c | 20 ++++++++++++++++++--
3 files changed, 21 insertions(+), 2 deletions(-)
--- a/lib/librte_pmd_virtio/virtio_ethdev.c 2014-08-25 19:00:07.574537243 -0700
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c 2014-08-25 19:00:07.574537243 -0700
@@ -976,6 +976,8 @@ virtio_dev_configure(struct rte_eth_dev
return (-EINVAL);
}
+ hw->vlan_strip = rxmode->hw_vlan_strip;
+
ret = vtpci_irq_config(hw, 0);
if (ret != 0)
PMD_DRV_LOG(ERR, "failed to set config vector");
--- a/lib/librte_pmd_virtio/virtio_pci.h 2014-08-25 19:00:07.574537243 -0700
+++ b/lib/librte_pmd_virtio/virtio_pci.h 2014-08-25 19:00:07.574537243 -0700
@@ -168,6 +168,7 @@ struct virtio_hw {
uint32_t max_tx_queues;
uint32_t max_rx_queues;
uint16_t vtnet_hdr_size;
+ uint8_t vlan_strip;
uint8_t use_msix;
uint8_t mac_addr[ETHER_ADDR_LEN];
};
--- a/lib/librte_pmd_virtio/virtio_rxtx.c 2014-08-25 19:00:07.574537243 -0700
+++ b/lib/librte_pmd_virtio/virtio_rxtx.c 2014-08-25 19:00:07.574537243 -0700
@@ -49,6 +49,7 @@
#include <rte_prefetch.h>
#include <rte_string_fns.h>
#include <rte_errno.h>
+#include <rte_byteorder.h>
#include "virtio_logs.h"
#include "virtio_ethdev.h"
@@ -406,8 +407,8 @@ virtio_dev_tx_queue_setup(struct rte_eth
PMD_INIT_FUNC_TRACE();
- if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOOFFLOADS)
- != ETH_TXQ_FLAGS_NOOFFLOADS) {
+ if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOXSUMS)
+ != ETH_TXQ_FLAGS_NOXSUMS) {
PMD_INIT_LOG(ERR, "TX checksum offload not supported\n");
return -EINVAL;
}
@@ -444,6 +445,7 @@ uint16_t
virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
{
struct virtqueue *rxvq = rx_queue;
+ struct virtio_hw *hw = rxvq->hw;
struct rte_mbuf *rxm, *new_mbuf;
uint16_t nb_used, num, nb_rx = 0;
uint32_t len[VIRTIO_MBUF_BURST_SZ];
@@ -487,6 +489,9 @@ virtio_recv_pkts(void *rx_queue, struct
rxm->pkt.pkt_len = (uint32_t)(len[i] - hdr_size);
rxm->pkt.data_len = (uint16_t)(len[i] - hdr_size);
+ if (hw->vlan_strip)
+ rte_vlan_strip(rxm);
+
VIRTIO_DUMP_PACKET(rxm, rxm->pkt.data_len);
rx_pkts[nb_rx++] = rxm;
@@ -711,6 +716,17 @@ virtio_xmit_pkts(void *tx_queue, struct
if (tx_pkts[nb_tx]->pkt.nb_segs <= txvq->vq_free_cnt) {
txm = tx_pkts[nb_tx];
+
+ /* Do VLAN tag insertion */
+ if (txm->ol_flags & PKT_TX_VLAN_PKT) {
+ error = rte_vlan_insert(txm);
+ if (unlikely(error)) {
+ rte_pktmbuf_free(txm);
+ ++nb_tx;
+ continue;
+ }
+ }
+
/* Enqueue Packet buffers */
error = virtqueue_enqueue_xmit(txvq, txm);
if (unlikely(error)) {
next prev parent reply other threads:[~2014-08-26 2:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 2:07 [RFC 00/10] virtio patches Stephen Hemminger
2014-08-26 2:07 ` [RFC 01/10] virtio: rearrange resource initialization Stephen Hemminger
[not found] ` <20140826020837.898427212-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26 7:14 ` Ouyang, Changchun
2014-08-26 2:07 ` [RFC 02/10] virtio: use weak barriers Stephen Hemminger
2014-08-26 2:07 ` [RFC 03/10] virtio: allow starting with link down Stephen Hemminger
2014-08-26 2:07 ` [RFC 04/10] virtio: add support for Link State interrupt Stephen Hemminger
2014-08-26 2:07 ` [RFC 05/10] ether: add soft vlan encap/decap functions Stephen Hemminger
2014-08-26 2:07 ` Stephen Hemminger [this message]
[not found] ` <20140826020848.386074683-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26 8:37 ` [RFC 06/10] virtio: use software vlan stripping Ouyang, Changchun
[not found] ` <F52918179C57134FAEC9EA62FA2F96251183B285-E2R4CRU6q/6iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-08-26 16:24 ` Stephen Hemminger
2014-08-27 5:42 ` Ouyang, Changchun
[not found] ` <F52918179C57134FAEC9EA62FA2F96251183B79C-E2R4CRU6q/6iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-08-27 18:04 ` Stephen Hemminger
2014-08-26 2:07 ` [RFC 07/10] virtio: remove unnecessary adapter structure Stephen Hemminger
[not found] ` <20140826020851.474452281-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26 6:43 ` Ouyang, Changchun
2014-08-26 2:07 ` [RFC 08/10] virtio: remove redundant vq_alignment Stephen Hemminger
[not found] ` <20140826020853.851222673-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26 8:41 ` Ouyang, Changchun
2014-08-26 2:07 ` [RFC 09/10] virtio: fix how states are handled during initialization Stephen Hemminger
2014-08-26 2:07 ` [RFC 10/10] virtio: add support for promiscious and multicast Stephen Hemminger
[not found] ` <20140826020858.448904783-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26 6:55 ` Ouyang, Changchun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140826020848.386074683@networkplumber.org \
--to=stephen-otpzqlsittunbdjkjebofr2eb7je58tq@public.gmane.org \
--cc=changchun.ouyang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dev-VfR2kkLFssw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.