All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
To: Ouyang Changchun
	<changchun.ouyang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: dev-VfR2kkLFssw@public.gmane.org
Subject: [RFC 09/10] virtio: fix how states are handled during initialization
Date: Mon, 25 Aug 2014 19:07:55 -0700	[thread overview]
Message-ID: <20140826020856.221149388@networkplumber.org> (raw)
In-Reply-To: 20140826020746.062748014@networkplumber.org

[-- Attachment #1: virtio-state.patch --]
[-- Type: text/plain, Size: 4018 bytes --]

Change order of initialiazation to match Linux kernel.
Don't blow away control queue by doing reset when stopped.

Signed-off-by: Stephen Hemminger <stephen-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>


---
 lib/librte_pmd_virtio/virtio_ethdev.c |   50 ++++++++++------------------------
 lib/librte_pmd_virtio/virtio_rxtx.c   |    2 +
 2 files changed, 18 insertions(+), 34 deletions(-)

--- a/lib/librte_pmd_virtio/virtio_ethdev.c	2014-08-25 19:00:11.062556360 -0700
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c	2014-08-25 19:00:12.122562032 -0700
@@ -394,9 +394,11 @@ virtio_dev_cq_queue_setup(struct rte_eth
 static void
 virtio_dev_close(struct rte_eth_dev *dev)
 {
-	PMD_INIT_LOG(DEBUG, "virtio_dev_close");
+	struct virtio_hw *hw = dev->data->dev_private;
 
-	virtio_dev_stop(dev);
+	vtpci_irq_config(hw, VIRTIO_MSI_NO_VECTOR);
+	vtpci_reset(hw);
+	virtio_dev_free_mbufs(dev);
 }
 
 /*
@@ -811,6 +813,9 @@ eth_virtio_dev_init(__rte_unused struct
 	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
 		return 0;
 
+	/* Tell the host we've noticed this device. */
+	vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_ACK);
+
 	pci_dev = eth_dev->pci_dev;
 	if (virtio_resource_init(pci_dev) < 0)
 		return -1;
@@ -821,9 +826,6 @@ eth_virtio_dev_init(__rte_unused struct
 	/* Reset the device although not necessary at startup */
 	vtpci_reset(hw);
 
-	/* Tell the host we've noticed this device. */
-	vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_ACK);
-
 	/* Tell the host we've known how to drive the device. */
 	vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_DRIVER);
 	virtio_negotiate_features(hw);
@@ -912,6 +914,9 @@ eth_virtio_dev_init(__rte_unused struct
 	/* Setup interrupt callback  */
 	rte_intr_callback_register(&pci_dev->intr_handle,
 				   virtio_interrupt_handler, eth_dev);
+
+	virtio_dev_cq_start(eth_dev);
+
 	return 0;
 }
 
@@ -982,19 +987,8 @@ virtio_dev_configure(struct rte_eth_dev
 static int
 virtio_dev_start(struct rte_eth_dev *dev)
 {
-	uint16_t nb_queues, i;
 	struct virtio_hw *hw = dev->data->dev_private;
-
-	/* Tell the host we've noticed this device. */
-	vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_ACK);
-
-	/* Tell the host we've known how to drive the device. */
-	vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_DRIVER);
-
-	virtio_dev_cq_start(dev);
-
-	/* Do final configuration before rx/tx engine starts */
-	virtio_dev_rxtx_start(dev);
+	uint16_t nb_queues;
 
 	/* check if lsc interrupt feature is enabled */
 	if (dev->data->dev_conf.intr_conf.lsc) {
@@ -1024,18 +1018,8 @@ virtio_dev_start(struct rte_eth_dev *dev
 			return -EINVAL;
 	}
 
-	PMD_INIT_LOG(DEBUG, "nb_queues=%d", nb_queues);
-
-	for (i = 0; i < nb_queues; i++)
-		virtqueue_notify(dev->data->rx_queues[i]);
-
-	PMD_INIT_LOG(DEBUG, "Notified backend at initialization");
-
-	for (i = 0; i < dev->data->nb_rx_queues; i++)
-		VIRTQUEUE_DUMP((struct virtqueue *)dev->data->rx_queues[i]);
-
-	for (i = 0; i < dev->data->nb_tx_queues; i++)
-		VIRTQUEUE_DUMP((struct virtqueue *)dev->data->tx_queues[i]);
+	/* Do final configuration before rx/tx engine starts */
+	virtio_dev_rxtx_start(dev);
 
 	return 0;
 }
@@ -1089,12 +1073,10 @@ static void virtio_dev_free_mbufs(struct
 static void
 virtio_dev_stop(struct rte_eth_dev *dev)
 {
-	struct virtio_hw *hw = dev->data->dev_private;
+	if (dev->data->dev_conf.intr_conf.lsc)
+		rte_intr_disable(&dev->pci_dev->intr_handle);
 
-	/* reset the NIC */
-	vtpci_irq_config(hw, 0);
-	vtpci_reset(hw);
-	virtio_dev_free_mbufs(dev);
+	memset(&dev->data->dev_link, 0, sizeof(struct rte_eth_link));
 }
 
 static int
--- a/lib/librte_pmd_virtio/virtio_rxtx.c	2014-08-25 19:00:11.062556360 -0700
+++ b/lib/librte_pmd_virtio/virtio_rxtx.c	2014-08-25 19:00:11.062556360 -0700
@@ -350,6 +350,8 @@ virtio_dev_rxtx_start(struct rte_eth_dev
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
 		virtio_dev_vring_start(dev->data->rx_queues[i], VTNET_RQ);
 		VIRTQUEUE_DUMP((struct virtqueue *)dev->data->rx_queues[i]);
+
+		virtqueue_notify(dev->data->rx_queues[i]);
 	}
 
 	/* Start tx vring. */

  parent reply	other threads:[~2014-08-26  2:07 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-26  2:07 [RFC 00/10] virtio patches Stephen Hemminger
2014-08-26  2:07 ` [RFC 01/10] virtio: rearrange resource initialization Stephen Hemminger
     [not found]   ` <20140826020837.898427212-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26  7:14     ` Ouyang, Changchun
2014-08-26  2:07 ` [RFC 02/10] virtio: use weak barriers Stephen Hemminger
2014-08-26  2:07 ` [RFC 03/10] virtio: allow starting with link down Stephen Hemminger
2014-08-26  2:07 ` [RFC 04/10] virtio: add support for Link State interrupt Stephen Hemminger
2014-08-26  2:07 ` [RFC 05/10] ether: add soft vlan encap/decap functions Stephen Hemminger
2014-08-26  2:07 ` [RFC 06/10] virtio: use software vlan stripping Stephen Hemminger
     [not found]   ` <20140826020848.386074683-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26  8:37     ` Ouyang, Changchun
     [not found]       ` <F52918179C57134FAEC9EA62FA2F96251183B285-E2R4CRU6q/6iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-08-26 16:24         ` Stephen Hemminger
2014-08-27  5:42           ` Ouyang, Changchun
     [not found]             ` <F52918179C57134FAEC9EA62FA2F96251183B79C-E2R4CRU6q/6iAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-08-27 18:04               ` Stephen Hemminger
2014-08-26  2:07 ` [RFC 07/10] virtio: remove unnecessary adapter structure Stephen Hemminger
     [not found]   ` <20140826020851.474452281-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26  6:43     ` Ouyang, Changchun
2014-08-26  2:07 ` [RFC 08/10] virtio: remove redundant vq_alignment Stephen Hemminger
     [not found]   ` <20140826020853.851222673-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26  8:41     ` Ouyang, Changchun
2014-08-26  2:07 ` Stephen Hemminger [this message]
2014-08-26  2:07 ` [RFC 10/10] virtio: add support for promiscious and multicast Stephen Hemminger
     [not found]   ` <20140826020858.448904783-OTpzqLSitTUnbdJkjeBofR2eb7JE58TQ@public.gmane.org>
2014-08-26  6:55     ` Ouyang, Changchun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140826020856.221149388@networkplumber.org \
    --to=stephen-otpzqlsittunbdjkjebofr2eb7je58tq@public.gmane.org \
    --cc=changchun.ouyang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=dev-VfR2kkLFssw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.