All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Gong <b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
	grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips
Date: Wed, 17 Sep 2014 11:32:32 +0800	[thread overview]
Message-ID: <20140917033230.GD27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917014723.GB4796@dragon>

On Wed, Sep 17, 2014 at 09:47:24AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:57PM +0800, Robin Gong wrote:
> > All chips of i.mx6 can be powered off by programming SNVS.
> > For example :
> > On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> > pmic ON/OFF pin, that will cause the whole PMIC powered off
> > except VSNVS. And system can restart once PMIC_ON_REQ goes
> > high by push POWRER key.
> > 
> > Signed-off-by: Robin Gong <b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  .../bindings/power_supply/imx-snvs-poweroff.txt     | 21 +++++++++++++++++++++
> 
> Binding docs should be generally a separate patch or in the driver
> patch, which uses the bindings.
> 
> Shawn
>
Ok, I'll split it.
> >  arch/arm/boot/dts/imx6qdl.dtsi                      |  5 +++++
> >  arch/arm/boot/dts/imx6sl.dtsi                       |  5 +++++
> >  arch/arm/boot/dts/imx6sx.dtsi                       |  5 +++++
> >  4 files changed, 36 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > new file mode 100644
> > index 0000000..1a3ab9a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > @@ -0,0 +1,21 @@
> > +i.mx6 Poweroff Driver
> > +
> > +SNVS_LPCR in SNVS module can power off the whole system by pull
> > +PMIC_ON_REQ low.
> > +
> > +Required Properties:
> > +-compatible: "fsl,sec-v4.0-poweroff"
> > +-reg: Specifies the physical address of the SNVS_LPCR register
> > +
> > +Example:
> > +	snvs@020cc000 {
> > +		compatible = "fsl,sec-v4.0-mon", "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0x020cc000 0x4000>;
> > +		.....
> > +		snvs-poweroff@38 {
> > +			compatible = "fsl,sec-v4.0-poweroff";
> > +			reg = <0x38 0x4>;
> > +		};
> > +	}
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index 70d7207..d2d7563 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -650,6 +650,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 { /* EPIT1 */
> > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> > index ba67714..6e1d8f6 100644
> > --- a/arch/arm/boot/dts/imx6sl.dtsi
> > +++ b/arch/arm/boot/dts/imx6sl.dtsi
> > @@ -568,6 +568,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 {
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> > index d137caca..c1f937e 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -671,6 +671,11 @@
> >  					reg = <0x34 0x58>;
> >  					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 {
> > -- 
> > 1.9.1
> > 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: b38343@freescale.com (Robin Gong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips
Date: Wed, 17 Sep 2014 11:32:32 +0800	[thread overview]
Message-ID: <20140917033230.GD27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917014723.GB4796@dragon>

On Wed, Sep 17, 2014 at 09:47:24AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:57PM +0800, Robin Gong wrote:
> > All chips of i.mx6 can be powered off by programming SNVS.
> > For example :
> > On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> > pmic ON/OFF pin, that will cause the whole PMIC powered off
> > except VSNVS. And system can restart once PMIC_ON_REQ goes
> > high by push POWRER key.
> > 
> > Signed-off-by: Robin Gong <b38343@freescale.com>
> > ---
> >  .../bindings/power_supply/imx-snvs-poweroff.txt     | 21 +++++++++++++++++++++
> 
> Binding docs should be generally a separate patch or in the driver
> patch, which uses the bindings.
> 
> Shawn
>
Ok, I'll split it.
> >  arch/arm/boot/dts/imx6qdl.dtsi                      |  5 +++++
> >  arch/arm/boot/dts/imx6sl.dtsi                       |  5 +++++
> >  arch/arm/boot/dts/imx6sx.dtsi                       |  5 +++++
> >  4 files changed, 36 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > new file mode 100644
> > index 0000000..1a3ab9a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > @@ -0,0 +1,21 @@
> > +i.mx6 Poweroff Driver
> > +
> > +SNVS_LPCR in SNVS module can power off the whole system by pull
> > +PMIC_ON_REQ low.
> > +
> > +Required Properties:
> > +-compatible: "fsl,sec-v4.0-poweroff"
> > +-reg: Specifies the physical address of the SNVS_LPCR register
> > +
> > +Example:
> > +	snvs at 020cc000 {
> > +		compatible = "fsl,sec-v4.0-mon", "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0x020cc000 0x4000>;
> > +		.....
> > +		snvs-poweroff at 38 {
> > +			compatible = "fsl,sec-v4.0-poweroff";
> > +			reg = <0x38 0x4>;
> > +		};
> > +	}
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index 70d7207..d2d7563 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -650,6 +650,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 { /* EPIT1 */
> > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> > index ba67714..6e1d8f6 100644
> > --- a/arch/arm/boot/dts/imx6sl.dtsi
> > +++ b/arch/arm/boot/dts/imx6sl.dtsi
> > @@ -568,6 +568,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 {
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> > index d137caca..c1f937e 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -671,6 +671,11 @@
> >  					reg = <0x34 0x58>;
> >  					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 {
> > -- 
> > 1.9.1
> > 

WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <b38343@freescale.com>
To: Shawn Guo <shawn.guo@freescale.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
	<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
	<galak@codeaurora.org>, <kernel@pengutronix.de>, <sre@kernel.org>,
	<dbaryshkov@gmail.com>, <dwmw2@infradead.org>,
	<grant.likely@linaro.org>, <linux@arm.linux.org.uk>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-pm@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips
Date: Wed, 17 Sep 2014 11:32:32 +0800	[thread overview]
Message-ID: <20140917033230.GD27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917014723.GB4796@dragon>

On Wed, Sep 17, 2014 at 09:47:24AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:57PM +0800, Robin Gong wrote:
> > All chips of i.mx6 can be powered off by programming SNVS.
> > For example :
> > On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> > pmic ON/OFF pin, that will cause the whole PMIC powered off
> > except VSNVS. And system can restart once PMIC_ON_REQ goes
> > high by push POWRER key.
> > 
> > Signed-off-by: Robin Gong <b38343@freescale.com>
> > ---
> >  .../bindings/power_supply/imx-snvs-poweroff.txt     | 21 +++++++++++++++++++++
> 
> Binding docs should be generally a separate patch or in the driver
> patch, which uses the bindings.
> 
> Shawn
>
Ok, I'll split it.
> >  arch/arm/boot/dts/imx6qdl.dtsi                      |  5 +++++
> >  arch/arm/boot/dts/imx6sl.dtsi                       |  5 +++++
> >  arch/arm/boot/dts/imx6sx.dtsi                       |  5 +++++
> >  4 files changed, 36 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > new file mode 100644
> > index 0000000..1a3ab9a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > @@ -0,0 +1,21 @@
> > +i.mx6 Poweroff Driver
> > +
> > +SNVS_LPCR in SNVS module can power off the whole system by pull
> > +PMIC_ON_REQ low.
> > +
> > +Required Properties:
> > +-compatible: "fsl,sec-v4.0-poweroff"
> > +-reg: Specifies the physical address of the SNVS_LPCR register
> > +
> > +Example:
> > +	snvs@020cc000 {
> > +		compatible = "fsl,sec-v4.0-mon", "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0x020cc000 0x4000>;
> > +		.....
> > +		snvs-poweroff@38 {
> > +			compatible = "fsl,sec-v4.0-poweroff";
> > +			reg = <0x38 0x4>;
> > +		};
> > +	}
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index 70d7207..d2d7563 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -650,6 +650,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 { /* EPIT1 */
> > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> > index ba67714..6e1d8f6 100644
> > --- a/arch/arm/boot/dts/imx6sl.dtsi
> > +++ b/arch/arm/boot/dts/imx6sl.dtsi
> > @@ -568,6 +568,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 {
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> > index d137caca..c1f937e 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -671,6 +671,11 @@
> >  					reg = <0x34 0x58>;
> >  					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff@38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit@020d0000 {
> > -- 
> > 1.9.1
> > 

  reply	other threads:[~2014-09-17  3:32 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12  8:48 [PATCH v2 0/3] add power off driver for i.mx6 Robin Gong
2014-09-12  8:48 ` Robin Gong
2014-09-12  8:48 ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong
     [not found]   ` <1410511739-31122-2-git-send-email-b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-09-17  1:47     ` Shawn Guo
2014-09-17  1:47       ` Shawn Guo
2014-09-17  1:47       ` Shawn Guo
2014-09-17  3:32       ` Robin Gong [this message]
2014-09-17  3:32         ` Robin Gong
2014-09-17  3:32         ` Robin Gong
2014-09-17  2:10   ` Shawn Guo
2014-09-17  2:10     ` Shawn Guo
2014-09-17  2:10     ` Shawn Guo
2014-09-17  3:45     ` Robin Gong
2014-09-17  3:45       ` Robin Gong
2014-09-17  3:45       ` Robin Gong
2014-09-17  4:50       ` Shawn Guo
2014-09-17  4:50         ` Shawn Guo
2014-09-17  4:50         ` Shawn Guo
2014-09-17  6:06       ` Sascha Hauer
2014-09-17  6:06         ` Sascha Hauer
2014-09-17  6:06         ` Sascha Hauer
     [not found]         ` <20140917060649.GJ4992-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-09-17  7:17           ` Robin Gong
2014-09-17  7:17             ` Robin Gong
2014-09-17  7:17             ` Robin Gong
2014-09-17  7:24             ` Sascha Hauer
2014-09-17  7:24               ` Sascha Hauer
2014-09-17  7:24               ` Sascha Hauer
     [not found]               ` <20140917072437.GP4992-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-09-17  8:16                 ` Robin Gong
2014-09-17  8:16                   ` Robin Gong
2014-09-17  8:16                   ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6 Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-17  2:06   ` Shawn Guo
2014-09-17  2:06     ` Shawn Guo
2014-09-17  2:06     ` Shawn Guo
2014-09-17  3:35     ` Robin Gong
2014-09-17  3:35       ` Robin Gong
2014-09-17  3:35       ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 3/3] ARM: configs: imx_v6_v7_defconfig: add power off driver Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140917033230.GD27452@Robin-OptiPlex-780 \
    --to=b38343-kzfg59tc24xl57midrcfdg@public.gmane.org \
    --cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.