All of lore.kernel.org
 help / color / mirror / Atom feed
From: Robin Gong <b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
	grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6
Date: Wed, 17 Sep 2014 11:35:49 +0800	[thread overview]
Message-ID: <20140917033548.GE27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917020655.GC4796@dragon>

On Wed, Sep 17, 2014 at 10:06:57AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:58PM +0800, Robin Gong wrote:
> > Add simple power off driver for i.mx6.
> > 
> > Signed-off-by: Robin Gong <b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  drivers/power/reset/Kconfig             |  6 +++
> >  drivers/power/reset/Makefile            |  1 +
> >  drivers/power/reset/imx-snvs-poweroff.c | 69 +++++++++++++++++++++++++++++++++
> >  3 files changed, 76 insertions(+)
> >  create mode 100644 drivers/power/reset/imx-snvs-poweroff.c
> > 
> > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> > index ca41523..c48d9ba 100644
> > --- a/drivers/power/reset/Kconfig
> > +++ b/drivers/power/reset/Kconfig
> > @@ -45,6 +45,12 @@ config POWER_RESET_HISI
> >  	help
> >  	  Reboot support for Hisilicon boards.
> >  
> > +config POWER_RESET_IMX
> > +	bool "IMX6 power-off driver"
> > +	depends on POWER_RESET && SOC_IMX6
> > +	help
> > +	  Power off support for i.mx6 boards.
> > +
> >  config POWER_RESET_MSM
> >  	bool "Qualcomm MSM power-off driver"
> >  	depends on POWER_RESET && ARCH_QCOM
> > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> > index a42e70e..2524daf 100644
> > --- a/drivers/power/reset/Makefile
> > +++ b/drivers/power/reset/Makefile
> > @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> >  obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> >  obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> > +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
> > diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
> > new file mode 100644
> > index 0000000..55603ba
> > --- /dev/null
> > +++ b/drivers/power/reset/imx-snvs-poweroff.c
> > @@ -0,0 +1,69 @@
> > +/* Power off driver for i.mx6
> > + * Copyright (c) 2014, FREESCALE CORPORATION.  All rights reserved.
> > + *
> > + * based on msm-poweroff.c
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <linux/delay.h>
> 
> Is it really needed?
> 
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <asm/system_misc.h>
> 
> Ditto
> 
> Shawn
>
Yes, will remove both.
> > +
> > +static void __iomem *snvs_base;
> > +
> > +static void do_imx_poweroff(void)
> > +{
> > +	u32 value = readl(snvs_base);
> > +
> > +	/* set TOP and DP_EN bit */
> > +	writel(value | 0x60, snvs_base);
> > +}
> > +
> > +static int imx_poweroff_probe(struct platform_device *pdev)
> > +{
> > +	snvs_base = of_iomap(pdev->dev.of_node, 0);
> > +	if (!snvs_base) {
> > +		dev_err(&pdev->dev, "failed to get memory\n");
> > +		return -EIO;
> > +	}
> > +
> > +	pm_power_off = do_imx_poweroff;
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id of_imx_poweroff_match[] = {
> > +	{ .compatible = "fsl,sec-v4.0-poweroff", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
> > +
> > +static struct platform_driver imx_poweroff_driver = {
> > +	.probe = imx_poweroff_probe,
> > +	.driver = {
> > +		.name = "imx-snvs-poweroff",
> > +		.of_match_table = of_match_ptr(of_imx_poweroff_match),
> > +	},
> > +};
> > +
> > +static int __init imx_poweroff_init(void)
> > +{
> > +	return platform_driver_register(&imx_poweroff_driver);
> > +}
> > +device_initcall(imx_poweroff_init);
> > -- 
> > 1.9.1
> > 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: b38343@freescale.com (Robin Gong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6
Date: Wed, 17 Sep 2014 11:35:49 +0800	[thread overview]
Message-ID: <20140917033548.GE27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917020655.GC4796@dragon>

On Wed, Sep 17, 2014 at 10:06:57AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:58PM +0800, Robin Gong wrote:
> > Add simple power off driver for i.mx6.
> > 
> > Signed-off-by: Robin Gong <b38343@freescale.com>
> > ---
> >  drivers/power/reset/Kconfig             |  6 +++
> >  drivers/power/reset/Makefile            |  1 +
> >  drivers/power/reset/imx-snvs-poweroff.c | 69 +++++++++++++++++++++++++++++++++
> >  3 files changed, 76 insertions(+)
> >  create mode 100644 drivers/power/reset/imx-snvs-poweroff.c
> > 
> > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> > index ca41523..c48d9ba 100644
> > --- a/drivers/power/reset/Kconfig
> > +++ b/drivers/power/reset/Kconfig
> > @@ -45,6 +45,12 @@ config POWER_RESET_HISI
> >  	help
> >  	  Reboot support for Hisilicon boards.
> >  
> > +config POWER_RESET_IMX
> > +	bool "IMX6 power-off driver"
> > +	depends on POWER_RESET && SOC_IMX6
> > +	help
> > +	  Power off support for i.mx6 boards.
> > +
> >  config POWER_RESET_MSM
> >  	bool "Qualcomm MSM power-off driver"
> >  	depends on POWER_RESET && ARCH_QCOM
> > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> > index a42e70e..2524daf 100644
> > --- a/drivers/power/reset/Makefile
> > +++ b/drivers/power/reset/Makefile
> > @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> >  obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> >  obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> > +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
> > diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
> > new file mode 100644
> > index 0000000..55603ba
> > --- /dev/null
> > +++ b/drivers/power/reset/imx-snvs-poweroff.c
> > @@ -0,0 +1,69 @@
> > +/* Power off driver for i.mx6
> > + * Copyright (c) 2014, FREESCALE CORPORATION.  All rights reserved.
> > + *
> > + * based on msm-poweroff.c
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <linux/delay.h>
> 
> Is it really needed?
> 
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <asm/system_misc.h>
> 
> Ditto
> 
> Shawn
>
Yes, will remove both.
> > +
> > +static void __iomem *snvs_base;
> > +
> > +static void do_imx_poweroff(void)
> > +{
> > +	u32 value = readl(snvs_base);
> > +
> > +	/* set TOP and DP_EN bit */
> > +	writel(value | 0x60, snvs_base);
> > +}
> > +
> > +static int imx_poweroff_probe(struct platform_device *pdev)
> > +{
> > +	snvs_base = of_iomap(pdev->dev.of_node, 0);
> > +	if (!snvs_base) {
> > +		dev_err(&pdev->dev, "failed to get memory\n");
> > +		return -EIO;
> > +	}
> > +
> > +	pm_power_off = do_imx_poweroff;
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id of_imx_poweroff_match[] = {
> > +	{ .compatible = "fsl,sec-v4.0-poweroff", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
> > +
> > +static struct platform_driver imx_poweroff_driver = {
> > +	.probe = imx_poweroff_probe,
> > +	.driver = {
> > +		.name = "imx-snvs-poweroff",
> > +		.of_match_table = of_match_ptr(of_imx_poweroff_match),
> > +	},
> > +};
> > +
> > +static int __init imx_poweroff_init(void)
> > +{
> > +	return platform_driver_register(&imx_poweroff_driver);
> > +}
> > +device_initcall(imx_poweroff_init);
> > -- 
> > 1.9.1
> > 

WARNING: multiple messages have this Message-ID (diff)
From: Robin Gong <b38343@freescale.com>
To: Shawn Guo <shawn.guo@freescale.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
	<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
	<galak@codeaurora.org>, <kernel@pengutronix.de>, <sre@kernel.org>,
	<dbaryshkov@gmail.com>, <dwmw2@infradead.org>,
	<grant.likely@linaro.org>, <linux@arm.linux.org.uk>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-pm@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6
Date: Wed, 17 Sep 2014 11:35:49 +0800	[thread overview]
Message-ID: <20140917033548.GE27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917020655.GC4796@dragon>

On Wed, Sep 17, 2014 at 10:06:57AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:58PM +0800, Robin Gong wrote:
> > Add simple power off driver for i.mx6.
> > 
> > Signed-off-by: Robin Gong <b38343@freescale.com>
> > ---
> >  drivers/power/reset/Kconfig             |  6 +++
> >  drivers/power/reset/Makefile            |  1 +
> >  drivers/power/reset/imx-snvs-poweroff.c | 69 +++++++++++++++++++++++++++++++++
> >  3 files changed, 76 insertions(+)
> >  create mode 100644 drivers/power/reset/imx-snvs-poweroff.c
> > 
> > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> > index ca41523..c48d9ba 100644
> > --- a/drivers/power/reset/Kconfig
> > +++ b/drivers/power/reset/Kconfig
> > @@ -45,6 +45,12 @@ config POWER_RESET_HISI
> >  	help
> >  	  Reboot support for Hisilicon boards.
> >  
> > +config POWER_RESET_IMX
> > +	bool "IMX6 power-off driver"
> > +	depends on POWER_RESET && SOC_IMX6
> > +	help
> > +	  Power off support for i.mx6 boards.
> > +
> >  config POWER_RESET_MSM
> >  	bool "Qualcomm MSM power-off driver"
> >  	depends on POWER_RESET && ARCH_QCOM
> > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> > index a42e70e..2524daf 100644
> > --- a/drivers/power/reset/Makefile
> > +++ b/drivers/power/reset/Makefile
> > @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
> >  obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> >  obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> > +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
> >  obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
> > diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c
> > new file mode 100644
> > index 0000000..55603ba
> > --- /dev/null
> > +++ b/drivers/power/reset/imx-snvs-poweroff.c
> > @@ -0,0 +1,69 @@
> > +/* Power off driver for i.mx6
> > + * Copyright (c) 2014, FREESCALE CORPORATION.  All rights reserved.
> > + *
> > + * based on msm-poweroff.c
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + */
> > +
> > +#include <linux/delay.h>
> 
> Is it really needed?
> 
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <asm/system_misc.h>
> 
> Ditto
> 
> Shawn
>
Yes, will remove both.
> > +
> > +static void __iomem *snvs_base;
> > +
> > +static void do_imx_poweroff(void)
> > +{
> > +	u32 value = readl(snvs_base);
> > +
> > +	/* set TOP and DP_EN bit */
> > +	writel(value | 0x60, snvs_base);
> > +}
> > +
> > +static int imx_poweroff_probe(struct platform_device *pdev)
> > +{
> > +	snvs_base = of_iomap(pdev->dev.of_node, 0);
> > +	if (!snvs_base) {
> > +		dev_err(&pdev->dev, "failed to get memory\n");
> > +		return -EIO;
> > +	}
> > +
> > +	pm_power_off = do_imx_poweroff;
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id of_imx_poweroff_match[] = {
> > +	{ .compatible = "fsl,sec-v4.0-poweroff", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
> > +
> > +static struct platform_driver imx_poweroff_driver = {
> > +	.probe = imx_poweroff_probe,
> > +	.driver = {
> > +		.name = "imx-snvs-poweroff",
> > +		.of_match_table = of_match_ptr(of_imx_poweroff_match),
> > +	},
> > +};
> > +
> > +static int __init imx_poweroff_init(void)
> > +{
> > +	return platform_driver_register(&imx_poweroff_driver);
> > +}
> > +device_initcall(imx_poweroff_init);
> > -- 
> > 1.9.1
> > 

  reply	other threads:[~2014-09-17  3:35 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12  8:48 [PATCH v2 0/3] add power off driver for i.mx6 Robin Gong
2014-09-12  8:48 ` Robin Gong
2014-09-12  8:48 ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong
     [not found]   ` <1410511739-31122-2-git-send-email-b38343-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-09-17  1:47     ` Shawn Guo
2014-09-17  1:47       ` Shawn Guo
2014-09-17  1:47       ` Shawn Guo
2014-09-17  3:32       ` Robin Gong
2014-09-17  3:32         ` Robin Gong
2014-09-17  3:32         ` Robin Gong
2014-09-17  2:10   ` Shawn Guo
2014-09-17  2:10     ` Shawn Guo
2014-09-17  2:10     ` Shawn Guo
2014-09-17  3:45     ` Robin Gong
2014-09-17  3:45       ` Robin Gong
2014-09-17  3:45       ` Robin Gong
2014-09-17  4:50       ` Shawn Guo
2014-09-17  4:50         ` Shawn Guo
2014-09-17  4:50         ` Shawn Guo
2014-09-17  6:06       ` Sascha Hauer
2014-09-17  6:06         ` Sascha Hauer
2014-09-17  6:06         ` Sascha Hauer
     [not found]         ` <20140917060649.GJ4992-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-09-17  7:17           ` Robin Gong
2014-09-17  7:17             ` Robin Gong
2014-09-17  7:17             ` Robin Gong
2014-09-17  7:24             ` Sascha Hauer
2014-09-17  7:24               ` Sascha Hauer
2014-09-17  7:24               ` Sascha Hauer
     [not found]               ` <20140917072437.GP4992-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-09-17  8:16                 ` Robin Gong
2014-09-17  8:16                   ` Robin Gong
2014-09-17  8:16                   ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6 Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-17  2:06   ` Shawn Guo
2014-09-17  2:06     ` Shawn Guo
2014-09-17  2:06     ` Shawn Guo
2014-09-17  3:35     ` Robin Gong [this message]
2014-09-17  3:35       ` Robin Gong
2014-09-17  3:35       ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 3/3] ARM: configs: imx_v6_v7_defconfig: add power off driver Robin Gong
2014-09-12  8:48   ` Robin Gong
2014-09-12  8:48   ` Robin Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140917033548.GE27452@Robin-OptiPlex-780 \
    --to=b38343-kzfg59tc24xl57midrcfdg@public.gmane.org \
    --cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.