All of lore.kernel.org
 help / color / mirror / Atom feed
From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support
Date: Thu, 18 Sep 2014 22:12:49 +0800	[thread overview]
Message-ID: <20140918141248.GL4796@dragon> (raw)
In-Reply-To: <819bd3bc9541ca53f005b7cf95bc890f1a9215e5.1410930820.git.bhuvanchandra.dv@toradex.com>

On Wed, Sep 17, 2014 at 01:46:29PM +0530, Bhuvanchandra DV wrote:
>  The Colibri standard defines four pins as PWM outputs, two of them (PWM
>  A and C) are routed to FTM instance 0 and the other two (PWM B and D)
>  are routed to FTM instance 1. Hence enable both FTM instances for the
>  Colibri module and mux the four pins accordingly.
> 
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
>  arch/arm/boot/dts/vf610-colibri-eval-v3.dts |    8 ++++++++
>  arch/arm/boot/dts/vf610-colibri.dtsi        |   25 +++++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> index 7fb3066..ba98039 100644
> --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> @@ -44,3 +44,11 @@
>  &uart2 {
>  	status = "okay";
>  };
> +
> +&pwm0 {
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};

Please sort the node alphabetically, so that we can locate them more
easily.

> diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
> index 0cd8343..9bd1415 100644
> --- a/arch/arm/boot/dts/vf610-colibri.dtsi
> +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
> @@ -69,6 +69,16 @@
>  	status = "okay";
>  };
>  
> +&pwm0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm0>;
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +};
> +

Ditto

>  &iomuxc {
>  	vf610-colibri {
>  		pinctrl_esdhc1: esdhc1grp {
> @@ -119,5 +129,20 @@
>  				VF610_PAD_PTD3__UART2_CTS		0x21a1
>  			>;
>  		};
> +
> +		pinctrl_pwm0: pwm0grp {

We also maintain the alphabetic order of pinctrl_* entries under iomuxc
node.

Shawn

> +			fsl,pins = <
> +				VF610_PAD_PTB0__FTM0_CH0		0x1182
> +				VF610_PAD_PTB1__FTM0_CH1		0x1182
> +			>;
> +		};
> +
> +		pinctrl_pwm1: pwm1grp {
> +			fsl,pins = <
> +				VF610_PAD_PTB8__FTM1_CH0		0x1182
> +				VF610_PAD_PTB9__FTM1_CH1		0x1182
> +			>;
> +		};
> +
>  	};
>  };
> -- 
> 1.7.9.5
> 

WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawn.guo@freescale.com>
To: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: <stefan@agner.ch>, <linux@arm.linux.org.uk>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support
Date: Thu, 18 Sep 2014 22:12:49 +0800	[thread overview]
Message-ID: <20140918141248.GL4796@dragon> (raw)
In-Reply-To: <819bd3bc9541ca53f005b7cf95bc890f1a9215e5.1410930820.git.bhuvanchandra.dv@toradex.com>

On Wed, Sep 17, 2014 at 01:46:29PM +0530, Bhuvanchandra DV wrote:
>  The Colibri standard defines four pins as PWM outputs, two of them (PWM
>  A and C) are routed to FTM instance 0 and the other two (PWM B and D)
>  are routed to FTM instance 1. Hence enable both FTM instances for the
>  Colibri module and mux the four pins accordingly.
> 
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> ---
>  arch/arm/boot/dts/vf610-colibri-eval-v3.dts |    8 ++++++++
>  arch/arm/boot/dts/vf610-colibri.dtsi        |   25 +++++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> index 7fb3066..ba98039 100644
> --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
> @@ -44,3 +44,11 @@
>  &uart2 {
>  	status = "okay";
>  };
> +
> +&pwm0 {
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};

Please sort the node alphabetically, so that we can locate them more
easily.

> diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
> index 0cd8343..9bd1415 100644
> --- a/arch/arm/boot/dts/vf610-colibri.dtsi
> +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
> @@ -69,6 +69,16 @@
>  	status = "okay";
>  };
>  
> +&pwm0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm0>;
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +};
> +

Ditto

>  &iomuxc {
>  	vf610-colibri {
>  		pinctrl_esdhc1: esdhc1grp {
> @@ -119,5 +129,20 @@
>  				VF610_PAD_PTD3__UART2_CTS		0x21a1
>  			>;
>  		};
> +
> +		pinctrl_pwm0: pwm0grp {

We also maintain the alphabetic order of pinctrl_* entries under iomuxc
node.

Shawn

> +			fsl,pins = <
> +				VF610_PAD_PTB0__FTM0_CH0		0x1182
> +				VF610_PAD_PTB1__FTM0_CH1		0x1182
> +			>;
> +		};
> +
> +		pinctrl_pwm1: pwm1grp {
> +			fsl,pins = <
> +				VF610_PAD_PTB8__FTM1_CH0		0x1182
> +				VF610_PAD_PTB9__FTM1_CH1		0x1182
> +			>;
> +		};
> +
>  	};
>  };
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2014-09-18 14:12 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-17  8:16 [PATCH 0/3] Add PWM and backlight support for Colibri VF61 modules Bhuvanchandra DV
2014-09-17  8:16 ` Bhuvanchandra DV
2014-09-17  8:16 ` [PATCH 1/3] ARM: dts: vf610: Add PWM second instance Bhuvanchandra DV
2014-09-17  8:16   ` Bhuvanchandra DV
2014-09-17  8:16 ` [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support Bhuvanchandra DV
2014-09-17  8:16   ` Bhuvanchandra DV
2014-09-18 14:12   ` Shawn Guo [this message]
2014-09-18 14:12     ` Shawn Guo
2014-09-19 10:19     ` Bhuvanchandra DV
2014-09-19 10:19       ` Bhuvanchandra DV
2014-09-17  8:16 ` [PATCH 3/3] ARM: dts: vf610-colibri: Add backlight support Bhuvanchandra DV
2014-09-17  8:16   ` Bhuvanchandra DV
2014-09-18 14:17   ` Shawn Guo
2014-09-18 14:17     ` Shawn Guo
2014-09-19 10:27     ` Bhuvanchandra DV
2014-09-19 10:27       ` Bhuvanchandra DV

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140918141248.GL4796@dragon \
    --to=shawn.guo@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.