From: bhuvanchandra.dv@toradex.com (Bhuvanchandra DV)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support
Date: Fri, 19 Sep 2014 15:49:09 +0530 [thread overview]
Message-ID: <541C031D.2010208@toradex.com> (raw)
In-Reply-To: <20140918141248.GL4796@dragon>
On Thursday 18 September 2014 07:42 PM, Shawn Guo wrote:
> On Wed, Sep 17, 2014 at 01:46:29PM +0530, Bhuvanchandra DV wrote:
>> The Colibri standard defines four pins as PWM outputs, two of them (PWM
>> A and C) are routed to FTM instance 0 and the other two (PWM B and D)
>> are routed to FTM instance 1. Hence enable both FTM instances for the
>> Colibri module and mux the four pins accordingly.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 8 ++++++++
>> arch/arm/boot/dts/vf610-colibri.dtsi | 25 +++++++++++++++++++++++++
>> 2 files changed, 33 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> index 7fb3066..ba98039 100644
>> --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> @@ -44,3 +44,11 @@
>> &uart2 {
>> status = "okay";
>> };
>> +
>> +&pwm0 {
>> + status = "okay";
>> +};
>> +
>> +&pwm1 {
>> + status = "okay";
>> +};
> Please sort the node alphabetically, so that we can locate them more
> easily.
Ok, will sort the nodes alphabetically
>> diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
>> index 0cd8343..9bd1415 100644
>> --- a/arch/arm/boot/dts/vf610-colibri.dtsi
>> +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
>> @@ -69,6 +69,16 @@
>> status = "okay";
>> };
>>
>> +&pwm0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm0>;
>> +};
>> +
>> +&pwm1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm1>;
>> +};
>> +
> Ditto
Ok
>> &iomuxc {
>> vf610-colibri {
>> pinctrl_esdhc1: esdhc1grp {
>> @@ -119,5 +129,20 @@
>> VF610_PAD_PTD3__UART2_CTS 0x21a1
>> >;
>> };
>> +
>> + pinctrl_pwm0: pwm0grp {
> We also maintain the alphabetic order of pinctrl_* entries under iomuxc
> node.
>
> Shawn
Ok
>> + fsl,pins = <
>> + VF610_PAD_PTB0__FTM0_CH0 0x1182
>> + VF610_PAD_PTB1__FTM0_CH1 0x1182
>> + >;
>> + };
>> +
>> + pinctrl_pwm1: pwm1grp {
>> + fsl,pins = <
>> + VF610_PAD_PTB8__FTM1_CH0 0x1182
>> + VF610_PAD_PTB9__FTM1_CH1 0x1182
>> + >;
>> + };
>> +
>> };
>> };
>> --
>> 1.7.9.5
>>
WARNING: multiple messages have this Message-ID (diff)
From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
To: Shawn Guo <shawn.guo@freescale.com>
Cc: <stefan@agner.ch>, <linux@arm.linux.org.uk>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support
Date: Fri, 19 Sep 2014 15:49:09 +0530 [thread overview]
Message-ID: <541C031D.2010208@toradex.com> (raw)
In-Reply-To: <20140918141248.GL4796@dragon>
On Thursday 18 September 2014 07:42 PM, Shawn Guo wrote:
> On Wed, Sep 17, 2014 at 01:46:29PM +0530, Bhuvanchandra DV wrote:
>> The Colibri standard defines four pins as PWM outputs, two of them (PWM
>> A and C) are routed to FTM instance 0 and the other two (PWM B and D)
>> are routed to FTM instance 1. Hence enable both FTM instances for the
>> Colibri module and mux the four pins accordingly.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>> ---
>> arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 8 ++++++++
>> arch/arm/boot/dts/vf610-colibri.dtsi | 25 +++++++++++++++++++++++++
>> 2 files changed, 33 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> index 7fb3066..ba98039 100644
>> --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
>> @@ -44,3 +44,11 @@
>> &uart2 {
>> status = "okay";
>> };
>> +
>> +&pwm0 {
>> + status = "okay";
>> +};
>> +
>> +&pwm1 {
>> + status = "okay";
>> +};
> Please sort the node alphabetically, so that we can locate them more
> easily.
Ok, will sort the nodes alphabetically
>> diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
>> index 0cd8343..9bd1415 100644
>> --- a/arch/arm/boot/dts/vf610-colibri.dtsi
>> +++ b/arch/arm/boot/dts/vf610-colibri.dtsi
>> @@ -69,6 +69,16 @@
>> status = "okay";
>> };
>>
>> +&pwm0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm0>;
>> +};
>> +
>> +&pwm1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm1>;
>> +};
>> +
> Ditto
Ok
>> &iomuxc {
>> vf610-colibri {
>> pinctrl_esdhc1: esdhc1grp {
>> @@ -119,5 +129,20 @@
>> VF610_PAD_PTD3__UART2_CTS 0x21a1
>> >;
>> };
>> +
>> + pinctrl_pwm0: pwm0grp {
> We also maintain the alphabetic order of pinctrl_* entries under iomuxc
> node.
>
> Shawn
Ok
>> + fsl,pins = <
>> + VF610_PAD_PTB0__FTM0_CH0 0x1182
>> + VF610_PAD_PTB1__FTM0_CH1 0x1182
>> + >;
>> + };
>> +
>> + pinctrl_pwm1: pwm1grp {
>> + fsl,pins = <
>> + VF610_PAD_PTB8__FTM1_CH0 0x1182
>> + VF610_PAD_PTB9__FTM1_CH1 0x1182
>> + >;
>> + };
>> +
>> };
>> };
>> --
>> 1.7.9.5
>>
next prev parent reply other threads:[~2014-09-19 10:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-17 8:16 [PATCH 0/3] Add PWM and backlight support for Colibri VF61 modules Bhuvanchandra DV
2014-09-17 8:16 ` Bhuvanchandra DV
2014-09-17 8:16 ` [PATCH 1/3] ARM: dts: vf610: Add PWM second instance Bhuvanchandra DV
2014-09-17 8:16 ` Bhuvanchandra DV
2014-09-17 8:16 ` [PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support Bhuvanchandra DV
2014-09-17 8:16 ` Bhuvanchandra DV
2014-09-18 14:12 ` Shawn Guo
2014-09-18 14:12 ` Shawn Guo
2014-09-19 10:19 ` Bhuvanchandra DV [this message]
2014-09-19 10:19 ` Bhuvanchandra DV
2014-09-17 8:16 ` [PATCH 3/3] ARM: dts: vf610-colibri: Add backlight support Bhuvanchandra DV
2014-09-17 8:16 ` Bhuvanchandra DV
2014-09-18 14:17 ` Shawn Guo
2014-09-18 14:17 ` Shawn Guo
2014-09-19 10:27 ` Bhuvanchandra DV
2014-09-19 10:27 ` Bhuvanchandra DV
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=541C031D.2010208@toradex.com \
--to=bhuvanchandra.dv@toradex.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.