From: Guenter Roeck <linux@roeck-us.net>
To: Jisheng Zhang <jszhang@marvell.com>
Cc: wim@iguana.be, linux-watchdog@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
Date: Tue, 23 Sep 2014 11:31:59 -0700 [thread overview]
Message-ID: <20140923183159.GB24930@roeck-us.net> (raw)
In-Reply-To: <1411458132-5410-3-git-send-email-jszhang@marvell.com>
On Tue, Sep 23, 2014 at 03:42:12PM +0800, Jisheng Zhang wrote:
> The kernel core now provides an API to trigger a system restart.
> Register with it to support restarting the system via. watchdog.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
> drivers/watchdog/dw_wdt.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
> index 449c885..9e577a6 100644
> --- a/drivers/watchdog/dw_wdt.c
> +++ b/drivers/watchdog/dw_wdt.c
> @@ -21,6 +21,7 @@
>
> #include <linux/bitops.h>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/fs.h>
> @@ -29,9 +30,11 @@
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> #include <linux/of.h>
> #include <linux/pm.h>
> #include <linux/platform_device.h>
> +#include <linux/reboot.h>
> #include <linux/spinlock.h>
> #include <linux/timer.h>
> #include <linux/uaccess.h>
> @@ -63,6 +66,7 @@ static struct {
> unsigned long next_heartbeat;
> struct timer_list timer;
> int expect_close;
> + struct notifier_block restart_handler;
> } dw_wdt;
>
> static inline int dw_wdt_is_enabled(void)
> @@ -121,6 +125,26 @@ static void dw_wdt_keepalive(void)
> WDOG_COUNTER_RESTART_REG_OFFSET);
> }
>
> +static int dw_wdt_restart_handle(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + u32 val;
> +
> + writel(0, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
> + val = readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
> + if (val & WDOG_CONTROL_REG_WDT_EN_MASK)
> + writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
> + WDOG_COUNTER_RESTART_REG_OFFSET);
> + else
> + writel(WDOG_CONTROL_REG_WDT_EN_MASK,
> + dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
> +
> + /* wait for reset to assert... */
> + mdelay(500);
> +
> + return NOTIFY_DONE;
> +}
> +
> static void dw_wdt_ping(unsigned long data)
> {
> if (time_before(jiffies, dw_wdt.next_heartbeat) ||
> @@ -316,6 +340,12 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
> if (ret)
> goto out_disable_clk;
>
> + dw_wdt.restart_handler.notifier_call = dw_wdt_restart_handle;
> + dw_wdt.restart_handler.priority = 128;
> + ret = register_restart_handler(&dw_wdt.restart_handler);
> + if (ret)
> + pr_warn("cannot register restart handler\n");
Please use dev_warn(&pdev->dev, ...).
Thanks,
Guenter
> +
> dw_wdt_set_next_heartbeat();
> setup_timer(&dw_wdt.timer, dw_wdt_ping, 0);
> mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
> @@ -330,6 +360,8 @@ out_disable_clk:
>
> static int dw_wdt_drv_remove(struct platform_device *pdev)
> {
> + unregister_restart_handler(&dw_wdt.restart_handler);
> +
> misc_deregister(&dw_wdt_miscdev);
>
> clk_disable_unprepare(dw_wdt.clk);
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support
Date: Tue, 23 Sep 2014 11:31:59 -0700 [thread overview]
Message-ID: <20140923183159.GB24930@roeck-us.net> (raw)
In-Reply-To: <1411458132-5410-3-git-send-email-jszhang@marvell.com>
On Tue, Sep 23, 2014 at 03:42:12PM +0800, Jisheng Zhang wrote:
> The kernel core now provides an API to trigger a system restart.
> Register with it to support restarting the system via. watchdog.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
> drivers/watchdog/dw_wdt.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
> index 449c885..9e577a6 100644
> --- a/drivers/watchdog/dw_wdt.c
> +++ b/drivers/watchdog/dw_wdt.c
> @@ -21,6 +21,7 @@
>
> #include <linux/bitops.h>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/fs.h>
> @@ -29,9 +30,11 @@
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> +#include <linux/notifier.h>
> #include <linux/of.h>
> #include <linux/pm.h>
> #include <linux/platform_device.h>
> +#include <linux/reboot.h>
> #include <linux/spinlock.h>
> #include <linux/timer.h>
> #include <linux/uaccess.h>
> @@ -63,6 +66,7 @@ static struct {
> unsigned long next_heartbeat;
> struct timer_list timer;
> int expect_close;
> + struct notifier_block restart_handler;
> } dw_wdt;
>
> static inline int dw_wdt_is_enabled(void)
> @@ -121,6 +125,26 @@ static void dw_wdt_keepalive(void)
> WDOG_COUNTER_RESTART_REG_OFFSET);
> }
>
> +static int dw_wdt_restart_handle(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + u32 val;
> +
> + writel(0, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
> + val = readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
> + if (val & WDOG_CONTROL_REG_WDT_EN_MASK)
> + writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
> + WDOG_COUNTER_RESTART_REG_OFFSET);
> + else
> + writel(WDOG_CONTROL_REG_WDT_EN_MASK,
> + dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
> +
> + /* wait for reset to assert... */
> + mdelay(500);
> +
> + return NOTIFY_DONE;
> +}
> +
> static void dw_wdt_ping(unsigned long data)
> {
> if (time_before(jiffies, dw_wdt.next_heartbeat) ||
> @@ -316,6 +340,12 @@ static int dw_wdt_drv_probe(struct platform_device *pdev)
> if (ret)
> goto out_disable_clk;
>
> + dw_wdt.restart_handler.notifier_call = dw_wdt_restart_handle;
> + dw_wdt.restart_handler.priority = 128;
> + ret = register_restart_handler(&dw_wdt.restart_handler);
> + if (ret)
> + pr_warn("cannot register restart handler\n");
Please use dev_warn(&pdev->dev, ...).
Thanks,
Guenter
> +
> dw_wdt_set_next_heartbeat();
> setup_timer(&dw_wdt.timer, dw_wdt_ping, 0);
> mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
> @@ -330,6 +360,8 @@ out_disable_clk:
>
> static int dw_wdt_drv_remove(struct platform_device *pdev)
> {
> + unregister_restart_handler(&dw_wdt.restart_handler);
> +
> misc_deregister(&dw_wdt_miscdev);
>
> clk_disable_unprepare(dw_wdt.clk);
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-09-23 18:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 7:42 [PATCH v2 0/2] watchdog: dw_wdt: one bug fix and restart handler support Jisheng Zhang
2014-09-23 7:42 ` Jisheng Zhang
2014-09-23 7:42 ` [PATCH v2 1/2] watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top() Jisheng Zhang
2014-09-23 7:42 ` Jisheng Zhang
2014-09-23 18:27 ` Guenter Roeck
2014-09-23 18:27 ` Guenter Roeck
2014-09-23 7:42 ` [PATCH v2 2/2] watchdog: dw_wdt: add restart handler support Jisheng Zhang
2014-09-23 7:42 ` Jisheng Zhang
2014-09-23 18:31 ` Guenter Roeck [this message]
2014-09-23 18:31 ` Guenter Roeck
2014-09-24 1:11 ` Jisheng Zhang
2014-09-24 1:11 ` Jisheng Zhang
2014-09-24 1:40 ` Guenter Roeck
2014-09-24 1:40 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140923183159.GB24930@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jszhang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.