All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: atull@opensource.altera.com
Cc: jdelvare@suse.de, lm-sensors@lm-sensors.org, lgirdwood@gmail.com,
	broonie@kernel.org, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, delicious.quinoa@gmail.com,
	dinguyen@opensource.altera.com, yvanderv@opensource.altera.com
Subject: Re: [lm-sensors] [PATCH v4 0/4] regulator support for pmbus and ltc2978
Date: Wed, 01 Oct 2014 20:07:43 +0000	[thread overview]
Message-ID: <20141001200743.GA21388@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-1-git-send-email-atull@opensource.altera.com>

On Wed, Oct 01, 2014 at 02:05:46PM -0500, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
> 
> This set of patches adds regulator support for pmbus_core.c and ltc2978.c
> 
> Each output has individual on/off control.
> 
> From PMBus_Specification_Part_II_Rev_1-3_20140318.pdf: 12.1.1. OPERATION
> Command Bit [7] Bit [7] controls whether the PMBus device output is on or off.
> If bit [7] is cleared (equals 0), then the output is off.  If bit [7] is set
> (equals 1), then the output is on.
> 
> Fixes in v4 are not huge: Add device tree bindings documentation for ltc2978.
> rename _pmbus_regulator_enable to _pmbus_regulator_on_off simplify
> _pmbus_regulator_on_off code s/regulator_regulator/regulator/ fix build break
> when !CONFIG_REGULATOR remove unused #define PB_OPERATION_CONTROL_SEQ_OFF fix
> a #endif comment simplify probe code, remove added switch statement remove
> BUG_ON(), add error message and fix num_regulators
> 
> Patch 1: document device tree bindings for ltc2978
> 
> Patch 2: add two helper functions for byte pmbus byte operations * byte write
> and byte read/modify/write
> 
> Patch 3: regulator support added in pmbus_core.c and pmbus.h * regulator_ops
> functions (is_enabled, enable, and disable) * gets regulator init data from
> device tree or platform data * registers the regulators * header has a macro
> for chip drivers to build their regulator_desc data
> 
> Patch 4: changes for ltc2978.c * Add Kconfig to enable/disable ltc2978
> regulator functionality * add regulator_desc and of_regulator_match info * use
> same structs for all parts; set num_regulators appropriately.
> 
Looks like this patch got lost. I did not get it, and I don't see it on lkml
either.

Guenter

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Cc: jdelvare-l3A5Bk7waGM@public.gmane.org,
	lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	pawel.moll-5wv7dgnIgG8@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	delicious.quinoa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
	yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Subject: Re: [PATCH v4 0/4] regulator support for pmbus and ltc2978
Date: Wed, 1 Oct 2014 13:07:43 -0700	[thread overview]
Message-ID: <20141001200743.GA21388@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-1-git-send-email-atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>

On Wed, Oct 01, 2014 at 02:05:46PM -0500, atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> From: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> 
> This set of patches adds regulator support for pmbus_core.c and ltc2978.c
> 
> Each output has individual on/off control.
> 
> From PMBus_Specification_Part_II_Rev_1-3_20140318.pdf: 12.1.1. OPERATION
> Command Bit [7] Bit [7] controls whether the PMBus device output is on or off.
> If bit [7] is cleared (equals 0), then the output is off.  If bit [7] is set
> (equals 1), then the output is on.
> 
> Fixes in v4 are not huge: Add device tree bindings documentation for ltc2978.
> rename _pmbus_regulator_enable to _pmbus_regulator_on_off simplify
> _pmbus_regulator_on_off code s/regulator_regulator/regulator/ fix build break
> when !CONFIG_REGULATOR remove unused #define PB_OPERATION_CONTROL_SEQ_OFF fix
> a #endif comment simplify probe code, remove added switch statement remove
> BUG_ON(), add error message and fix num_regulators
> 
> Patch 1: document device tree bindings for ltc2978
> 
> Patch 2: add two helper functions for byte pmbus byte operations * byte write
> and byte read/modify/write
> 
> Patch 3: regulator support added in pmbus_core.c and pmbus.h * regulator_ops
> functions (is_enabled, enable, and disable) * gets regulator init data from
> device tree or platform data * registers the regulators * header has a macro
> for chip drivers to build their regulator_desc data
> 
> Patch 4: changes for ltc2978.c * Add Kconfig to enable/disable ltc2978
> regulator functionality * add regulator_desc and of_regulator_match info * use
> same structs for all parts; set num_regulators appropriately.
> 
Looks like this patch got lost. I did not get it, and I don't see it on lkml
either.

Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: atull@opensource.altera.com
Cc: jdelvare@suse.de, lm-sensors@lm-sensors.org, lgirdwood@gmail.com,
	broonie@kernel.org, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, delicious.quinoa@gmail.com,
	dinguyen@opensource.altera.com, yvanderv@opensource.altera.com
Subject: Re: [PATCH v4 0/4] regulator support for pmbus and ltc2978
Date: Wed, 1 Oct 2014 13:07:43 -0700	[thread overview]
Message-ID: <20141001200743.GA21388@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-1-git-send-email-atull@opensource.altera.com>

On Wed, Oct 01, 2014 at 02:05:46PM -0500, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
> 
> This set of patches adds regulator support for pmbus_core.c and ltc2978.c
> 
> Each output has individual on/off control.
> 
> From PMBus_Specification_Part_II_Rev_1-3_20140318.pdf: 12.1.1. OPERATION
> Command Bit [7] Bit [7] controls whether the PMBus device output is on or off.
> If bit [7] is cleared (equals 0), then the output is off.  If bit [7] is set
> (equals 1), then the output is on.
> 
> Fixes in v4 are not huge: Add device tree bindings documentation for ltc2978.
> rename _pmbus_regulator_enable to _pmbus_regulator_on_off simplify
> _pmbus_regulator_on_off code s/regulator_regulator/regulator/ fix build break
> when !CONFIG_REGULATOR remove unused #define PB_OPERATION_CONTROL_SEQ_OFF fix
> a #endif comment simplify probe code, remove added switch statement remove
> BUG_ON(), add error message and fix num_regulators
> 
> Patch 1: document device tree bindings for ltc2978
> 
> Patch 2: add two helper functions for byte pmbus byte operations * byte write
> and byte read/modify/write
> 
> Patch 3: regulator support added in pmbus_core.c and pmbus.h * regulator_ops
> functions (is_enabled, enable, and disable) * gets regulator init data from
> device tree or platform data * registers the regulators * header has a macro
> for chip drivers to build their regulator_desc data
> 
> Patch 4: changes for ltc2978.c * Add Kconfig to enable/disable ltc2978
> regulator functionality * add regulator_desc and of_regulator_match info * use
> same structs for all parts; set num_regulators appropriately.
> 
Looks like this patch got lost. I did not get it, and I don't see it on lkml
either.

Guenter

  parent reply	other threads:[~2014-10-01 20:07 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-01 19:05 [lm-sensors] [PATCH v4 0/4] regulator support for pmbus and ltc2978 atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 1/4] hwmon: ltc2978: device tree bindings documentation atull
2014-10-01 19:05   ` atull
2014-10-01 19:05   ` atull
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 2/4] pmbus: core: add helpers for byte write and read modify write atull
2014-10-01 19:05   ` atull
2014-10-01 19:05   ` atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2014-10-02  4:05   ` [lm-sensors] " Guenter Roeck
2014-10-02  4:05     ` Guenter Roeck
2014-10-02  4:05     ` Guenter Roeck
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 3/4] pmbus: add regulator support atull
2014-10-01 19:05   ` atull
2014-10-01 19:05   ` atull
2014-10-02 11:20   ` [lm-sensors] " Mark Brown
2014-10-02 11:20     ` Mark Brown
2014-10-02 13:22     ` [lm-sensors] " Guenter Roeck
2014-10-02 13:22       ` Guenter Roeck
2014-10-02 18:43       ` [lm-sensors] " atull
2014-10-02 18:43         ` atull
2014-10-02 18:43         ` atull
2014-10-01 20:07 ` Guenter Roeck [this message]
2014-10-01 20:07   ` [PATCH v4 0/4] regulator support for pmbus and ltc2978 Guenter Roeck
2014-10-01 20:07   ` Guenter Roeck
2014-10-01 20:20   ` [lm-sensors] " atull
2014-10-01 20:20     ` atull
2014-10-01 20:20     ` atull
2014-10-02  3:25 ` [lm-sensors] " Guenter Roeck
2014-10-02  3:25   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141001200743.GA21388@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=atull@opensource.altera.com \
    --cc=broonie@kernel.org \
    --cc=delicious.quinoa@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@opensource.altera.com \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jdelvare@suse.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=yvanderv@opensource.altera.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.