From: Guenter Roeck <linux@roeck-us.net>
To: atull@opensource.altera.com, jdelvare@suse.de
Cc: lm-sensors@lm-sensors.org, lgirdwood@gmail.com,
broonie@kernel.org, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, delicious.quinoa@gmail.com,
dinguyen@opensource.altera.com, yvanderv@opensource.altera.com
Subject: Re: [lm-sensors] [PATCH v4 2/4] pmbus: core: add helpers for byte write and read modify write
Date: Thu, 02 Oct 2014 04:05:49 +0000 [thread overview]
Message-ID: <542CCF1D.5090609@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-3-git-send-email-atull@opensource.altera.com>
On 10/01/2014 12:05 PM, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
>
> Add two helper functions:
> * pmbus_write_byte_data = paged byte write
> * pmbus_update_byte_data = paged byte read/modify/write
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 291d11f..d6c3701 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -253,6 +253,37 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
> }
> EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
>
> +int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
> +{
> + int rv;
> +
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> +
> + return i2c_smbus_write_byte_data(client, reg, value);
> +}
> +EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
> +
> +int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
> + u8 mask, u8 value)
> +{
> + unsigned int tmp;
> + int rv;
> +
> + rv = pmbus_read_byte_data(client, page, reg);
> + if (rv < 0)
> + return rv;
> +
> + tmp = (rv & ~mask) | (value & mask);
> +
> + if (tmp != rv)
> + rv = pmbus_write_byte_data(client, page, reg, tmp);
> +
> + return rv;
> +}
> +EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
> +
> /*
> * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
> * a device specific mapping function exists and calls it if necessary.
>
Results in:
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: symbol 'pmbus_write_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: symbol 'pmbus_update_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: no previous prototype for 'pmbus_write_byte_data' [-Wmissing-prototypes]
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: no previous prototype for 'pmbus_update_byte_data' [-Wmissing-prototypes]
No need to resubmit. I added a patch to un-export the functions
and merged patch 2 and 3 together in order to avoid a warning
after patch 2. We can always export the new helper functions
later if needed.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
jdelvare-l3A5Bk7waGM@public.gmane.org
Cc: lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
delicious.quinoa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org,
yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org
Subject: Re: [PATCH v4 2/4] pmbus: core: add helpers for byte write and read modify write
Date: Wed, 01 Oct 2014 21:05:49 -0700 [thread overview]
Message-ID: <542CCF1D.5090609@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-3-git-send-email-atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
On 10/01/2014 12:05 PM, atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> From: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>
> Add two helper functions:
> * pmbus_write_byte_data = paged byte write
> * pmbus_update_byte_data = paged byte read/modify/write
>
> Signed-off-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 291d11f..d6c3701 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -253,6 +253,37 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
> }
> EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
>
> +int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
> +{
> + int rv;
> +
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> +
> + return i2c_smbus_write_byte_data(client, reg, value);
> +}
> +EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
> +
> +int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
> + u8 mask, u8 value)
> +{
> + unsigned int tmp;
> + int rv;
> +
> + rv = pmbus_read_byte_data(client, page, reg);
> + if (rv < 0)
> + return rv;
> +
> + tmp = (rv & ~mask) | (value & mask);
> +
> + if (tmp != rv)
> + rv = pmbus_write_byte_data(client, page, reg, tmp);
> +
> + return rv;
> +}
> +EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
> +
> /*
> * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
> * a device specific mapping function exists and calls it if necessary.
>
Results in:
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: symbol 'pmbus_write_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: symbol 'pmbus_update_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: no previous prototype for 'pmbus_write_byte_data' [-Wmissing-prototypes]
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: no previous prototype for 'pmbus_update_byte_data' [-Wmissing-prototypes]
No need to resubmit. I added a patch to un-export the functions
and merged patch 2 and 3 together in order to avoid a warning
after patch 2. We can always export the new helper functions
later if needed.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <linux@roeck-us.net>
To: atull@opensource.altera.com, jdelvare@suse.de
Cc: lm-sensors@lm-sensors.org, lgirdwood@gmail.com,
broonie@kernel.org, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, delicious.quinoa@gmail.com,
dinguyen@opensource.altera.com, yvanderv@opensource.altera.com
Subject: Re: [PATCH v4 2/4] pmbus: core: add helpers for byte write and read modify write
Date: Wed, 01 Oct 2014 21:05:49 -0700 [thread overview]
Message-ID: <542CCF1D.5090609@roeck-us.net> (raw)
In-Reply-To: <1412190349-16343-3-git-send-email-atull@opensource.altera.com>
On 10/01/2014 12:05 PM, atull@opensource.altera.com wrote:
> From: Alan Tull <atull@opensource.altera.com>
>
> Add two helper functions:
> * pmbus_write_byte_data = paged byte write
> * pmbus_update_byte_data = paged byte read/modify/write
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 291d11f..d6c3701 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -253,6 +253,37 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
> }
> EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
>
> +int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
> +{
> + int rv;
> +
> + rv = pmbus_set_page(client, page);
> + if (rv < 0)
> + return rv;
> +
> + return i2c_smbus_write_byte_data(client, reg, value);
> +}
> +EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
> +
> +int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
> + u8 mask, u8 value)
> +{
> + unsigned int tmp;
> + int rv;
> +
> + rv = pmbus_read_byte_data(client, page, reg);
> + if (rv < 0)
> + return rv;
> +
> + tmp = (rv & ~mask) | (value & mask);
> +
> + if (tmp != rv)
> + rv = pmbus_write_byte_data(client, page, reg, tmp);
> +
> + return rv;
> +}
> +EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
> +
> /*
> * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
> * a device specific mapping function exists and calls it if necessary.
>
Results in:
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: symbol 'pmbus_write_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: symbol 'pmbus_update_byte_data' was not declared. Should it be static?
drivers/hwmon/pmbus/pmbus_core.c:259:5: warning: no previous prototype for 'pmbus_write_byte_data' [-Wmissing-prototypes]
drivers/hwmon/pmbus/pmbus_core.c:271:5: warning: no previous prototype for 'pmbus_update_byte_data' [-Wmissing-prototypes]
No need to resubmit. I added a patch to un-export the functions
and merged patch 2 and 3 together in order to avoid a warning
after patch 2. We can always export the new helper functions
later if needed.
Guenter
next prev parent reply other threads:[~2014-10-02 4:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-01 19:05 [lm-sensors] [PATCH v4 0/4] regulator support for pmbus and ltc2978 atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 1/4] hwmon: ltc2978: device tree bindings documentation atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 2/4] pmbus: core: add helpers for byte write and read modify write atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
2014-10-02 4:05 ` Guenter Roeck [this message]
2014-10-02 4:05 ` Guenter Roeck
2014-10-02 4:05 ` Guenter Roeck
2014-10-01 19:05 ` [lm-sensors] [PATCH v4 3/4] pmbus: add regulator support atull
2014-10-01 19:05 ` atull
2014-10-01 19:05 ` atull
2014-10-02 11:20 ` [lm-sensors] " Mark Brown
2014-10-02 11:20 ` Mark Brown
2014-10-02 13:22 ` [lm-sensors] " Guenter Roeck
2014-10-02 13:22 ` Guenter Roeck
2014-10-02 18:43 ` [lm-sensors] " atull
2014-10-02 18:43 ` atull
2014-10-02 18:43 ` atull
2014-10-01 20:07 ` [lm-sensors] [PATCH v4 0/4] regulator support for pmbus and ltc2978 Guenter Roeck
2014-10-01 20:07 ` Guenter Roeck
2014-10-01 20:07 ` Guenter Roeck
2014-10-01 20:20 ` [lm-sensors] " atull
2014-10-01 20:20 ` atull
2014-10-01 20:20 ` atull
2014-10-02 3:25 ` [lm-sensors] " Guenter Roeck
2014-10-02 3:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542CCF1D.5090609@roeck-us.net \
--to=linux@roeck-us.net \
--cc=atull@opensource.altera.com \
--cc=broonie@kernel.org \
--cc=delicious.quinoa@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@opensource.altera.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jdelvare@suse.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=yvanderv@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.