From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
To: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Cc: "Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
"Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org
Subject: Re: [PATCH] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Fri, 5 Dec 2014 11:36:04 -0600 [thread overview]
Message-ID: <20141205173604.GB28038@saruman> (raw)
In-Reply-To: <1417800739-13146-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 1929 bytes --]
On Fri, Dec 05, 2014 at 11:32:18AM -0600, Nishanth Menon wrote:
> From: "Menon, Nishanth" <nm-l0cyMroinI0@public.gmane.org>
do you want to sanitize your name ?
> TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> a fan (such as AFB02505HHB) over J1 connector for various purposes.
> Provide device tree node to enable the same.
>
> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> ---
> Depends on the following:
> https://patchwork.kernel.org/patch/5439201/
> https://patchwork.kernel.org/patch/5439191/
>
> enable and disable can be controlled by
> echo '1' > /sys/class/hwmon/hwmon0/fan1_target
> and
> echo '0' > /sys/class/hwmon/hwmon0/fan1_target
>
> requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> Applies on
> https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2
>
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..7fe82ef 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -80,6 +80,15 @@
> default-state = "off";
> };
> };
> +
> + gpio_fan {
> + /* Based on 5v 500mA AFB02505HHB */
> + compatible = "gpio-fan";
> + pinctrl-names = "default";
not needed.
> + gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> + gpio-fan,speed-map = <0 0
> + 13000 1>;
> + };
> };
>
> &dra7_pmx_core {
> @@ -314,6 +323,12 @@
> wakeup-source;
> ti,palmas-long-press-seconds = <12>;
> };
> +
> + tps659038_gpio: tps659038_gpio {
> + compatible = "ti,palmas-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> };
>
> tmp102: tmp102@48 {
> --
> 1.7.9.5
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Fri, 5 Dec 2014 11:36:04 -0600 [thread overview]
Message-ID: <20141205173604.GB28038@saruman> (raw)
In-Reply-To: <1417800739-13146-1-git-send-email-nm@ti.com>
On Fri, Dec 05, 2014 at 11:32:18AM -0600, Nishanth Menon wrote:
> From: "Menon, Nishanth" <nm@ti.com>
do you want to sanitize your name ?
> TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> a fan (such as AFB02505HHB) over J1 connector for various purposes.
> Provide device tree node to enable the same.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> Depends on the following:
> https://patchwork.kernel.org/patch/5439201/
> https://patchwork.kernel.org/patch/5439191/
>
> enable and disable can be controlled by
> echo '1' > /sys/class/hwmon/hwmon0/fan1_target
> and
> echo '0' > /sys/class/hwmon/hwmon0/fan1_target
>
> requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> Applies on
> https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2
>
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..7fe82ef 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -80,6 +80,15 @@
> default-state = "off";
> };
> };
> +
> + gpio_fan {
> + /* Based on 5v 500mA AFB02505HHB */
> + compatible = "gpio-fan";
> + pinctrl-names = "default";
not needed.
> + gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> + gpio-fan,speed-map = <0 0
> + 13000 1>;
> + };
> };
>
> &dra7_pmx_core {
> @@ -314,6 +323,12 @@
> wakeup-source;
> ti,palmas-long-press-seconds = <12>;
> };
> +
> + tps659038_gpio: tps659038_gpio {
> + compatible = "ti,palmas-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> };
>
> tmp102: tmp102 at 48 {
> --
> 1.7.9.5
>
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141205/db78dda6/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Felipe Balbi <balbi@ti.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Tony Lindgren" <tony@atomide.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, balbi@ti.com
Subject: Re: [PATCH] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Fri, 5 Dec 2014 11:36:04 -0600 [thread overview]
Message-ID: <20141205173604.GB28038@saruman> (raw)
In-Reply-To: <1417800739-13146-1-git-send-email-nm@ti.com>
[-- Attachment #1: Type: text/plain, Size: 1885 bytes --]
On Fri, Dec 05, 2014 at 11:32:18AM -0600, Nishanth Menon wrote:
> From: "Menon, Nishanth" <nm@ti.com>
do you want to sanitize your name ?
> TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> a fan (such as AFB02505HHB) over J1 connector for various purposes.
> Provide device tree node to enable the same.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> Depends on the following:
> https://patchwork.kernel.org/patch/5439201/
> https://patchwork.kernel.org/patch/5439191/
>
> enable and disable can be controlled by
> echo '1' > /sys/class/hwmon/hwmon0/fan1_target
> and
> echo '0' > /sys/class/hwmon/hwmon0/fan1_target
>
> requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> Applies on
> https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2
>
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..7fe82ef 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -80,6 +80,15 @@
> default-state = "off";
> };
> };
> +
> + gpio_fan {
> + /* Based on 5v 500mA AFB02505HHB */
> + compatible = "gpio-fan";
> + pinctrl-names = "default";
not needed.
> + gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> + gpio-fan,speed-map = <0 0
> + 13000 1>;
> + };
> };
>
> &dra7_pmx_core {
> @@ -314,6 +323,12 @@
> wakeup-source;
> ti,palmas-long-press-seconds = <12>;
> };
> +
> + tps659038_gpio: tps659038_gpio {
> + compatible = "ti,palmas-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> };
>
> tmp102: tmp102@48 {
> --
> 1.7.9.5
>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-12-05 17:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 17:32 [PATCH] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node Nishanth Menon
2014-12-05 17:32 ` Nishanth Menon
2014-12-05 17:32 ` Nishanth Menon
[not found] ` <1417800739-13146-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-12-05 17:36 ` Felipe Balbi [this message]
2014-12-05 17:36 ` Felipe Balbi
2014-12-05 17:36 ` Felipe Balbi
2014-12-05 17:48 ` [PATCH V2] " Nishanth Menon
2014-12-05 17:48 ` Nishanth Menon
2014-12-05 17:48 ` Nishanth Menon
2015-01-07 23:44 ` Tony Lindgren
2015-01-07 23:44 ` Tony Lindgren
2015-01-07 23:58 ` Nishanth Menon
2015-01-07 23:58 ` Nishanth Menon
2015-01-08 0:19 ` Tony Lindgren
2015-01-08 0:19 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141205173604.GB28038@saruman \
--to=balbi-l0cymroini0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nm-l0cyMroinI0@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.