All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-omap@vger.kernel.org, balbi@ti.com
Subject: Re: [PATCH V2] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Wed, 7 Jan 2015 15:44:42 -0800	[thread overview]
Message-ID: <20150107234442.GI13010@atomide.com> (raw)
In-Reply-To: <1417801732-24620-1-git-send-email-nm@ti.com>

* Nishanth Menon <nm@ti.com> [141205 09:51]:
> TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> a fan (such as AFB02505HHB) over J1 connector for various purposes.
> Provide device tree node to enable the same.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>

Applying into omap-for-v3.20/dt thanks.

Tony

> ---
> 
> V2: review comment updates
> 	review comments update
> 		- Sanitized outlook-ified name back to normal ;) 
> 		- removed unnecessary pinctrl-names property.
> V1: https://patchwork.kernel.org/patch/5444911/
> 
> 
> Depends on the following:
> https://patchwork.kernel.org/patch/5439201/
> https://patchwork.kernel.org/patch/5439191/
> 
> enable and disable can be controlled by (post the RPM, it finds
> closest match - even a 1 will do)
> 
> echo '13000' > /sys/class/hwmon/hwmon0/fan1_target
> and
> echo '0' > /sys/class/hwmon/hwmon0/fan1_target
> 
> Test log: http://slexy.org/view/s2T0ajh46z
> 
> requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> Applies on 
> https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2
> 
>  arch/arm/boot/dts/am57xx-beagle-x15.dts |   14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..4e55e94 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -80,6 +80,14 @@
>  			default-state = "off";
>  		};
>  	};
> +
> +	gpio_fan {
> +		/* Based on 5v 500mA AFB02505HHB */
> +		compatible = "gpio-fan";
> +		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> +		gpio-fan,speed-map = <0    0
> +				      13000 1>;
> +	};
>  };
>  
>  &dra7_pmx_core {
> @@ -314,6 +322,12 @@
>  			wakeup-source;
>  			ti,palmas-long-press-seconds = <12>;
>  		};
> +
> +		tps659038_gpio: tps659038_gpio {
> +			compatible = "ti,palmas-gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
>  	};
>  
>  	tmp102: tmp102@48 {
> -- 
> 1.7.9.5
> 

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node
Date: Wed, 7 Jan 2015 15:44:42 -0800	[thread overview]
Message-ID: <20150107234442.GI13010@atomide.com> (raw)
In-Reply-To: <1417801732-24620-1-git-send-email-nm@ti.com>

* Nishanth Menon <nm@ti.com> [141205 09:51]:
> TPS gpio now controls a 5v 500mA TL5209 regulator which may be supply
> a fan (such as AFB02505HHB) over J1 connector for various purposes.
> Provide device tree node to enable the same.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>

Applying into omap-for-v3.20/dt thanks.

Tony

> ---
> 
> V2: review comment updates
> 	review comments update
> 		- Sanitized outlook-ified name back to normal ;) 
> 		- removed unnecessary pinctrl-names property.
> V1: https://patchwork.kernel.org/patch/5444911/
> 
> 
> Depends on the following:
> https://patchwork.kernel.org/patch/5439201/
> https://patchwork.kernel.org/patch/5439191/
> 
> enable and disable can be controlled by (post the RPM, it finds
> closest match - even a 1 will do)
> 
> echo '13000' > /sys/class/hwmon/hwmon0/fan1_target
> and
> echo '0' > /sys/class/hwmon/hwmon0/fan1_target
> 
> Test log: http://slexy.org/view/s2T0ajh46z
> 
> requires CONFIG_GPIO_PALMAS and CONFIG_SENSORS_GPIO_FAN to be operational
> Applies on 
> https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.19/dt-v2
> 
>  arch/arm/boot/dts/am57xx-beagle-x15.dts |   14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index 49edbda..4e55e94 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -80,6 +80,14 @@
>  			default-state = "off";
>  		};
>  	};
> +
> +	gpio_fan {
> +		/* Based on 5v 500mA AFB02505HHB */
> +		compatible = "gpio-fan";
> +		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
> +		gpio-fan,speed-map = <0    0
> +				      13000 1>;
> +	};
>  };
>  
>  &dra7_pmx_core {
> @@ -314,6 +322,12 @@
>  			wakeup-source;
>  			ti,palmas-long-press-seconds = <12>;
>  		};
> +
> +		tps659038_gpio: tps659038_gpio {
> +			compatible = "ti,palmas-gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
>  	};
>  
>  	tmp102: tmp102 at 48 {
> -- 
> 1.7.9.5
> 

  reply	other threads:[~2015-01-07 23:44 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-05 17:32 [PATCH] ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node Nishanth Menon
2014-12-05 17:32 ` Nishanth Menon
2014-12-05 17:32 ` Nishanth Menon
     [not found] ` <1417800739-13146-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2014-12-05 17:36   ` Felipe Balbi
2014-12-05 17:36     ` Felipe Balbi
2014-12-05 17:36     ` Felipe Balbi
2014-12-05 17:48 ` [PATCH V2] " Nishanth Menon
2014-12-05 17:48   ` Nishanth Menon
2014-12-05 17:48   ` Nishanth Menon
2015-01-07 23:44   ` Tony Lindgren [this message]
2015-01-07 23:44     ` Tony Lindgren
2015-01-07 23:58     ` Nishanth Menon
2015-01-07 23:58       ` Nishanth Menon
2015-01-08  0:19       ` Tony Lindgren
2015-01-08  0:19         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150107234442.GI13010@atomide.com \
    --to=tony@atomide.com \
    --cc=balbi@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.