All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	nsekhar@ti.com, t-kristo@ti.com
Subject: Re: [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2
Date: Wed, 10 Dec 2014 08:45:02 -0800	[thread overview]
Message-ID: <20141210164501.GD30437@atomide.com> (raw)
In-Reply-To: <547DED90.50504@ti.com>

* Nishanth Menon <nm@ti.com> [141202 08:51]:
> On 11/27/2014 09:32 PM, Lokesh Vutla wrote:
> > ES1.2 is a minor variant of ES1.1. Major changes since ES1.1 are
> > updating ROM for fixing the following boot modes:
> > - NAND boot
> > - UART boot
> > - Ethernet boot
> > - USB HOST/Client boot
> > This patch adds ID support for AM437x ES1.2 silicon.
> > There are no additional kernel fixes required for ES1.2 silicon.
> > 
> > Latest Technical Documentation can be found here:
> > http://www.ti.com/lsds/ti/arm/sitara_arm_cortex_a_processor/arm_cortex_a9_core/am437x_arm_cortex_a9/tech_docs.page
> > 
> > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> > ---
> >  arch/arm/mach-omap2/id.c  | 8 ++++++--
> >  arch/arm/mach-omap2/soc.h | 1 +
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> > index 53841de..c25feba 100644
> > --- a/arch/arm/mach-omap2/id.c
> > +++ b/arch/arm/mach-omap2/id.c
> > @@ -471,11 +471,15 @@ void __init omap3xxx_check_revision(void)
> >  			cpu_rev = "1.0";
> >  			break;
> >  		case 1:
> > -		/* FALLTHROUGH */
> > -		default:
> >  			omap_revision = AM437X_REV_ES1_1;
> >  			cpu_rev = "1.1";
> >  			break;
> > +		case 2:
> > +		/* FALLTHROUGH */
> > +		default:
> > +			omap_revision = AM437X_REV_ES1_2;
> > +			cpu_rev = "1.2";
> > +			break;
> >  		}
> >  		break;
> >  	case 0xb8f2:
> > diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
> > index 4376f59..c1a3b44 100644
> > --- a/arch/arm/mach-omap2/soc.h
> > +++ b/arch/arm/mach-omap2/soc.h
> > @@ -446,6 +446,7 @@ IS_OMAP_TYPE(3430, 0x3430)
> >  #define AM437X_CLASS		0x43700000
> >  #define AM437X_REV_ES1_0	(AM437X_CLASS | (0x10 << 8))
> >  #define AM437X_REV_ES1_1	(AM437X_CLASS | (0x11 << 8))
> > +#define AM437X_REV_ES1_2	(AM437X_CLASS | (0x12 << 8))
> >  
> >  #define OMAP443X_CLASS		0x44300044
> >  #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
> > 
> 
> Reviewed-by: Nishanth Menon <nm@ti.com>

Applying into omap-for-v3.19/fixes thanks.

Tony

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2
Date: Wed, 10 Dec 2014 08:45:02 -0800	[thread overview]
Message-ID: <20141210164501.GD30437@atomide.com> (raw)
In-Reply-To: <547DED90.50504@ti.com>

* Nishanth Menon <nm@ti.com> [141202 08:51]:
> On 11/27/2014 09:32 PM, Lokesh Vutla wrote:
> > ES1.2 is a minor variant of ES1.1. Major changes since ES1.1 are
> > updating ROM for fixing the following boot modes:
> > - NAND boot
> > - UART boot
> > - Ethernet boot
> > - USB HOST/Client boot
> > This patch adds ID support for AM437x ES1.2 silicon.
> > There are no additional kernel fixes required for ES1.2 silicon.
> > 
> > Latest Technical Documentation can be found here:
> > http://www.ti.com/lsds/ti/arm/sitara_arm_cortex_a_processor/arm_cortex_a9_core/am437x_arm_cortex_a9/tech_docs.page
> > 
> > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> > ---
> >  arch/arm/mach-omap2/id.c  | 8 ++++++--
> >  arch/arm/mach-omap2/soc.h | 1 +
> >  2 files changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> > index 53841de..c25feba 100644
> > --- a/arch/arm/mach-omap2/id.c
> > +++ b/arch/arm/mach-omap2/id.c
> > @@ -471,11 +471,15 @@ void __init omap3xxx_check_revision(void)
> >  			cpu_rev = "1.0";
> >  			break;
> >  		case 1:
> > -		/* FALLTHROUGH */
> > -		default:
> >  			omap_revision = AM437X_REV_ES1_1;
> >  			cpu_rev = "1.1";
> >  			break;
> > +		case 2:
> > +		/* FALLTHROUGH */
> > +		default:
> > +			omap_revision = AM437X_REV_ES1_2;
> > +			cpu_rev = "1.2";
> > +			break;
> >  		}
> >  		break;
> >  	case 0xb8f2:
> > diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
> > index 4376f59..c1a3b44 100644
> > --- a/arch/arm/mach-omap2/soc.h
> > +++ b/arch/arm/mach-omap2/soc.h
> > @@ -446,6 +446,7 @@ IS_OMAP_TYPE(3430, 0x3430)
> >  #define AM437X_CLASS		0x43700000
> >  #define AM437X_REV_ES1_0	(AM437X_CLASS | (0x10 << 8))
> >  #define AM437X_REV_ES1_1	(AM437X_CLASS | (0x11 << 8))
> > +#define AM437X_REV_ES1_2	(AM437X_CLASS | (0x12 << 8))
> >  
> >  #define OMAP443X_CLASS		0x44300044
> >  #define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
> > 
> 
> Reviewed-by: Nishanth Menon <nm@ti.com>

Applying into omap-for-v3.19/fixes thanks.

Tony

  reply	other threads:[~2014-12-10 16:46 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-28  3:32 [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2 Lokesh Vutla
2014-11-28  3:32 ` Lokesh Vutla
2014-12-02 16:49 ` Nishanth Menon
2014-12-02 16:49   ` Nishanth Menon
2014-12-10 16:45   ` Tony Lindgren [this message]
2014-12-10 16:45     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141210164501.GD30437@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.