From: Nishanth Menon <nm@ti.com>
To: Lokesh Vutla <lokeshvutla@ti.com>, linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, tony@atomide.com,
nsekhar@ti.com, t-kristo@ti.com
Subject: Re: [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2
Date: Tue, 2 Dec 2014 10:49:20 -0600 [thread overview]
Message-ID: <547DED90.50504@ti.com> (raw)
In-Reply-To: <1417145527-31086-1-git-send-email-lokeshvutla@ti.com>
On 11/27/2014 09:32 PM, Lokesh Vutla wrote:
> ES1.2 is a minor variant of ES1.1. Major changes since ES1.1 are
> updating ROM for fixing the following boot modes:
> - NAND boot
> - UART boot
> - Ethernet boot
> - USB HOST/Client boot
> This patch adds ID support for AM437x ES1.2 silicon.
> There are no additional kernel fixes required for ES1.2 silicon.
>
> Latest Technical Documentation can be found here:
> http://www.ti.com/lsds/ti/arm/sitara_arm_cortex_a_processor/arm_cortex_a9_core/am437x_arm_cortex_a9/tech_docs.page
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> arch/arm/mach-omap2/id.c | 8 ++++++--
> arch/arm/mach-omap2/soc.h | 1 +
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 53841de..c25feba 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -471,11 +471,15 @@ void __init omap3xxx_check_revision(void)
> cpu_rev = "1.0";
> break;
> case 1:
> - /* FALLTHROUGH */
> - default:
> omap_revision = AM437X_REV_ES1_1;
> cpu_rev = "1.1";
> break;
> + case 2:
> + /* FALLTHROUGH */
> + default:
> + omap_revision = AM437X_REV_ES1_2;
> + cpu_rev = "1.2";
> + break;
> }
> break;
> case 0xb8f2:
> diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
> index 4376f59..c1a3b44 100644
> --- a/arch/arm/mach-omap2/soc.h
> +++ b/arch/arm/mach-omap2/soc.h
> @@ -446,6 +446,7 @@ IS_OMAP_TYPE(3430, 0x3430)
> #define AM437X_CLASS 0x43700000
> #define AM437X_REV_ES1_0 (AM437X_CLASS | (0x10 << 8))
> #define AM437X_REV_ES1_1 (AM437X_CLASS | (0x11 << 8))
> +#define AM437X_REV_ES1_2 (AM437X_CLASS | (0x12 << 8))
>
> #define OMAP443X_CLASS 0x44300044
> #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
>
Reviewed-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2
Date: Tue, 2 Dec 2014 10:49:20 -0600 [thread overview]
Message-ID: <547DED90.50504@ti.com> (raw)
In-Reply-To: <1417145527-31086-1-git-send-email-lokeshvutla@ti.com>
On 11/27/2014 09:32 PM, Lokesh Vutla wrote:
> ES1.2 is a minor variant of ES1.1. Major changes since ES1.1 are
> updating ROM for fixing the following boot modes:
> - NAND boot
> - UART boot
> - Ethernet boot
> - USB HOST/Client boot
> This patch adds ID support for AM437x ES1.2 silicon.
> There are no additional kernel fixes required for ES1.2 silicon.
>
> Latest Technical Documentation can be found here:
> http://www.ti.com/lsds/ti/arm/sitara_arm_cortex_a_processor/arm_cortex_a9_core/am437x_arm_cortex_a9/tech_docs.page
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> arch/arm/mach-omap2/id.c | 8 ++++++--
> arch/arm/mach-omap2/soc.h | 1 +
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index 53841de..c25feba 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -471,11 +471,15 @@ void __init omap3xxx_check_revision(void)
> cpu_rev = "1.0";
> break;
> case 1:
> - /* FALLTHROUGH */
> - default:
> omap_revision = AM437X_REV_ES1_1;
> cpu_rev = "1.1";
> break;
> + case 2:
> + /* FALLTHROUGH */
> + default:
> + omap_revision = AM437X_REV_ES1_2;
> + cpu_rev = "1.2";
> + break;
> }
> break;
> case 0xb8f2:
> diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
> index 4376f59..c1a3b44 100644
> --- a/arch/arm/mach-omap2/soc.h
> +++ b/arch/arm/mach-omap2/soc.h
> @@ -446,6 +446,7 @@ IS_OMAP_TYPE(3430, 0x3430)
> #define AM437X_CLASS 0x43700000
> #define AM437X_REV_ES1_0 (AM437X_CLASS | (0x10 << 8))
> #define AM437X_REV_ES1_1 (AM437X_CLASS | (0x11 << 8))
> +#define AM437X_REV_ES1_2 (AM437X_CLASS | (0x12 << 8))
>
> #define OMAP443X_CLASS 0x44300044
> #define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
>
Reviewed-by: Nishanth Menon <nm@ti.com>
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-12-02 16:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-28 3:32 [PATCH] ARM: OMAP2+: AM43x: Add ID for ES1.2 Lokesh Vutla
2014-11-28 3:32 ` Lokesh Vutla
2014-12-02 16:49 ` Nishanth Menon [this message]
2014-12-02 16:49 ` Nishanth Menon
2014-12-10 16:45 ` Tony Lindgren
2014-12-10 16:45 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547DED90.50504@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nsekhar@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.